While updating Nvidia video drivers Monitor screen goes blank!!!

While updating Nvidia display drivers my screen goes blank while installing
the updated drivers, I uninstall current drivers as Nvidia suggested, Machine
then needs a reboot as I install updated drivers it shows program loading
then screen goes blank! Have Vista 32 bit Ult, Intel en6600, 4 gig of DDR2
800, 8800 gts Single video card 640 EVGA, and Power is a Antec 650 true
power! Use dual boot system with XPPro and dont have this problem!!! Been
going round and round with Microsoft since March trying to get information on
Hot fix in Article KB9325539 they say to contact customer support, who
promptly replies that Hot fix is not avaliable!!
HELP!!!!!!!!!!

Too many digits in KB....

--

Blessings & peace --- Ray
"Matttherat" <> wrote in message
news:8506283D-DECB-43F8-A865-...
> While updating Nvidia display drivers my screen goes blank while
> installing
> the updated drivers, I uninstall current drivers as Nvidia suggested,
> Machine
> then needs a reboot as I install updated drivers it shows program loading
> then screen goes blank! Have Vista 32 bit Ult, Intel en6600, 4 gig of DDR2
> 800, 8800 gts Single video card 640 EVGA, and Power is a Antec 650 true
> power! Use dual boot system with XPPro and dont have this problem!!! Been
> going round and round with Microsoft since March trying to get information
> on
> Hot fix in Article KB9325539 they say to contact customer support, who
> promptly replies that Hot fix is not avaliable!!
> HELP!!!!!!!!!!

My keyboard key must have been sticky the KB article should read KB932539

"Matttherat" wrote:

> While updating Nvidia display drivers my screen goes blank while installing
> the updated drivers, I uninstall current drivers as Nvidia suggested, Machine
> then needs a reboot as I install updated drivers it shows program loading
> then screen goes blank! Have Vista 32 bit Ult, Intel en6600, 4 gig of DDR2
> 800, 8800 gts Single video card 640 EVGA, and Power is a Antec 650 true
> power! Use dual boot system with XPPro and dont have this problem!!! Been
> going round and round with Microsoft since March trying to get information on
> Hot fix in Article KB9325539 they say to contact customer support, who
> promptly replies that Hot fix is not avaliable!!
> HELP!!!!!!!!!!

Should be KB 932539 Sorry!

"Wandering" wrote:

> Too many digits in KB....
>
> --
>
> Blessings & peace --- Ray
> "Matttherat" <> wrote in message
> news:8506283D-DECB-43F8-A865-...
> > While updating Nvidia display drivers my screen goes blank while
> > installing
> > the updated drivers, I uninstall current drivers as Nvidia suggested,
> > Machine
> > then needs a reboot as I install updated drivers it shows program loading
> > then screen goes blank! Have Vista 32 bit Ult, Intel en6600, 4 gig of DDR2
> > 800, 8800 gts Single video card 640 EVGA, and Power is a Antec 650 true
> > power! Use dual boot system with XPPro and dont have this problem!!! Been
> > going round and round with Microsoft since March trying to get information
> > on
> > Hot fix in Article KB9325539 they say to contact customer support, who
> > promptly replies that Hot fix is not avaliable!!
> > HELP!!!!!!!!!!
>
>

Have you tried to roll back the drivers. I had the same problem with an
computer i used to own. I would put the latest drivers on and the
screen would blank ut after loading.


--
roy69

- Core 2 Quad Q6600
- Abit IP35 Pro
- 4 x 1GB OcUK PC2-6400 C5 800 MHZ Duel Channel
- Leadtek GeForce 8800 GTS 640MB GDDR3
- CiBox TFT 22" Widescreen LCD Panel. 1680 x 1050
- Creative X-Fi 7.1 PCI-E
- Antec 900 Ultimate Gaming Case
- Creative Inspire 7.1 T7900 Speakers

I did try rolling them back, Ive read everything from under-power supplied,
to bad memory mods , I really think its a Vista problem that will be worked
out when service pack one rolls out, thanks for the replie though! have a
good one Roy69

"roy69" wrote:

>
> Have you tried to roll back the drivers. I had the same problem with an
> computer i used to own. I would put the latest drivers on and the
> screen would blank ut after loading.
>
>
> --
> roy69
>
> - Core 2 Quad Q6600
> - Abit IP35 Pro
> - 4 x 1GB OcUK PC2-6400 C5 800 MHZ Duel Channel
> - Leadtek GeForce 8800 GTS 640MB GDDR3
> - CiBox TFT 22" Widescreen LCD Panel. 1680 x 1050
> - Creative X-Fi 7.1 PCI-E
> - Antec 900 Ultimate Gaming Case
> - Creative Inspire 7.1 T7900 Speakers
>

Repost with the exact model and manufacturer of the gfx card. In the
meantime if you have the origanal disk for the card boot into safe mode,
uninstall the drivers and reinstall from the disk. Hope this helps.

P.S. it is not a power problem you have.


--
roy69

- Core 2 Quad Q6600
- Abit IP35 Pro
- 4 x 1GB OcUK PC2-6400 C5 800 MHZ Duel Channel
- Leadtek GeForce 8800 GTS 640MB GDDR3
- CiBox TFT 22" Widescreen LCD Panel. 1680 x 1050
- Creative X-Fi 7.1 PCI-E
- Antec 900 Ultimate Gaming Case
- Creative Inspire 7.1 T7900 Speakers

Just updated with Nvidia with vers# 169.04 and machine went throght uninstall
of old drivers and installed new ones with out going blank I cant believe
it!!!! I have to wait and see when they put out the next beta set of drivers
to see if its really, really fixed!!! thanks for all the help and have a
good one to all!!!!!!!!

"roy69" wrote:

>
> Repost with the exact model and manufacturer of the gfx card. In the
> meantime if you have the origanal disk for the card boot into safe mode,
> uninstall the drivers and reinstall from the disk. Hope this helps.
>
> P.S. it is not a power problem you have.
>
>
> --
> roy69
>
> - Core 2 Quad Q6600
> - Abit IP35 Pro
> - 4 x 1GB OcUK PC2-6400 C5 800 MHZ Duel Channel
> - Leadtek GeForce 8800 GTS 640MB GDDR3
> - CiBox TFT 22" Widescreen LCD Panel. 1680 x 1050
> - Creative X-Fi 7.1 PCI-E
> - Antec 900 Ultimate Gaming Case
> - Creative Inspire 7.1 T7900 Speakers
>

Just wanted to know how the quad core was working out for you Ive been
hearing about stability issues in BIOS Im thinking about upgrading to a
Q6700 any info will help thanks!

"roy69" wrote:

>
> Repost with the exact model and manufacturer of the gfx card. In the
> meantime if you have the origanal disk for the card boot into safe mode,
> uninstall the drivers and reinstall from the disk. Hope this helps.
>
> P.S. it is not a power problem you have.
>
>
> --
> roy69
>
> - Core 2 Quad Q6600
> - Abit IP35 Pro
> - 4 x 1GB OcUK PC2-6400 C5 800 MHZ Duel Channel
> - Leadtek GeForce 8800 GTS 640MB GDDR3
> - CiBox TFT 22" Widescreen LCD Panel. 1680 x 1050
> - Creative X-Fi 7.1 PCI-E
> - Antec 900 Ultimate Gaming Case
> - Creative Inspire 7.1 T7900 Speakers
>

Im etting the same issue

ASUS M2A-VM Mobo (with latest bios installed - v.0901 i think which
fixes video output flicker or black screen)
AMD x2 6000
4gb Kingston 667 Memory
GE8500GT Graphics
Running Vista 64

I installed Vista OK and then the 1st thing i did after installing the
mobo drivers (chipset, network and onboard sound) was download and
install the latest Nvidia drivers (prior to that Vista was using the
standard VGA drivers and i was running fine 1280x1024 but aero runns
like a dog as proper direct x support isnt working)

After rebooting I get the small progress bar type screen then when it
should switch to the vista logo screen it goes blank with the odd screen
flicker.

I have to force a reboot by powering off and back on then it asks if I
want safe mode - I go in with safe mode and remove the nvidia drivers
reboot and its back to working with the standard drivers.

I have tested the latest drivers (167 something) the latest beta (169)
and the ones that came with the card (163 i think) and it happens on all
3


--
thejoose