Whirlpool Dehumidifier Vibration Noise Frustration

Hi,

Less than two years ago, I bought a Whirlpool dehumidifier model
AD50DSS2. This is a 50 pint, manual control unit. I wanted a manual
control type because I built my own controller which wouldn't work with
electronic control dehumidifiers. Note: It is hard to find a manual control
type of dehumidifier, which was common years ago.

I became very disappointed with it because of the vibration noise. The
noise isn't there all the time. I called Whirlpool about the vibration
noise, and they sent a service man. He opened up the unit and checked for
loose components. He put some kind of compound down where the compressor
is located. It seemed to fix the problem at first, but after he left, the
noise was back. I will spare you the details regarding the number of times I
worked on this "infernal machine". Note: I am a consumer products
service technician (repair TVs, etc.). It seems as though the "housing"
(cabinet) resonates with the compressor vibration, thus "amplifying" the
vibration noise. If I squeeze on the sides of the cabinet, the noise goes
down. The degree of vibration noise seems to be dependent on the room
temperature and humidity.

I can't tell you how many times I felt like getting the sledge hammer
and using it to fix the noise permanently, but where would I find a
manual control, 50 pint dehumidifier?

Before this Whirlpool, I had a quiet Goldstar dehumidifier (manual
control) for many years. Eventually the compressor went bad. I was told it
would be too expensive to get it repaired. Unfortunately, I put it out for
trash, and I bought this Whirlpool.

The reason I posted this is to warn you if you are thinking about buying
a dehumidifier, go with another brand.

John

PS, Email address is not valid.

wrote:

> Hi,
>
> Less than two years ago, I bought a Whirlpool dehumidifier model
> AD50DSS2. This is a 50 pint, manual control unit. I wanted a manual

(snip)

And you thought this was a good idea to post in a technical support
newsgroup for the Windows Vista operating system? I can't imagine why.

Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ

..and this has to do with Windows Vista....exactly what

--
Ex_Bri

::*-Peter-*:
-Toronto, Canada
-x64 Vista Ultimate SP2 & Windows 7 Ultimate
'[image: http://img.photobucket.com/albums/v7...rit/mvp21.jpg]
(https://mvp.support.microsoft.com/profile/Peter.McNicol
-Consumer Security-

wrote:
> Hi,
>
> Less than two years ago, I bought a Whirlpool dehumidifier model
> AD50DSS2. This is a 50 pint, manual control unit. I wanted a manual
> control type because I built my own controller which wouldn't work with
> electronic control dehumidifiers. Note: It is hard to find a manual control
> type of dehumidifier, which was common years ago.
>
> I became very disappointed with it because of the vibration noise. The
> noise isn't there all the time. I called Whirlpool about the vibration
> noise, and they sent a service man. He opened up the unit and checked for
> loose components. He put some kind of compound down where the compressor
> is located. It seemed to fix the problem at first, but after he left, the
> noise was back. I will spare you the details regarding the number of times I
> worked on this "infernal machine". Note: I am a consumer products
> service technician (repair TVs, etc.). It seems as though the "housing"
> (cabinet) resonates with the compressor vibration, thus "amplifying" the
> vibration noise. If I squeeze on the sides of the cabinet, the noise goes
> down. The degree of vibration noise seems to be dependent on the room
> temperature and humidity.

I believe most of these issues will be fixed in the Windows 7 version...
;-)


G

That's funny; I was just talking with someone about a dehumidifier, yesterday. Now, if we talk further about it, I have one caveat
to share from the most unexpected place!

<> wrote in message news:...
> Hi,
>
> Less than two years ago, I bought a Whirlpool dehumidifier model
> AD50DSS2. This is a 50 pint, manual control unit. I wanted a manual
> control type because I built my own controller which wouldn't work with
> electronic control dehumidifiers. Note: It is hard to find a manual control
> type of dehumidifier, which was common years ago.
>
> I became very disappointed with it because of the vibration noise. The
> noise isn't there all the time. I called Whirlpool about the vibration
> noise, and they sent a service man. He opened up the unit and checked for
> loose components. He put some kind of compound down where the compressor
> is located. It seemed to fix the problem at first, but after he left, the
> noise was back. I will spare you the details regarding the number of times I
> worked on this "infernal machine". Note: I am a consumer products
> service technician (repair TVs, etc.). It seems as though the "housing"
> (cabinet) resonates with the compressor vibration, thus "amplifying" the
> vibration noise. If I squeeze on the sides of the cabinet, the noise goes
> down. The degree of vibration noise seems to be dependent on the room
> temperature and humidity.
>
> I can't tell you how many times I felt like getting the sledge hammer
> and using it to fix the noise permanently, but where would I find a
> manual control, 50 pint dehumidifier?
>
> Before this Whirlpool, I had a quiet Goldstar dehumidifier (manual
> control) for many years. Eventually the compressor went bad. I was told it
> would be too expensive to get it repaired. Unfortunately, I put it out for
> trash, and I bought this Whirlpool.
>
> The reason I posted this is to warn you if you are thinking about buying
> a dehumidifier, go with another brand.
>
> John
>
> PS, Email address is not valid.
>

<> wrote in message
news:...
> Hi,
>
> Less than two years ago, I bought a Whirlpool dehumidifier model
> AD50DSS2. This is a 50 pint, manual control unit. I wanted a manual
> control type because I built my own controller which wouldn't work with
> electronic control dehumidifiers. Note: It is hard to find a manual
> control
> type of dehumidifier, which was common years ago.
>
> I became very disappointed with it because of the vibration noise. The
> noise isn't there all the time. I called Whirlpool about the vibration
> noise, and they sent a service man. He opened up the unit and checked for
> loose components. He put some kind of compound down where the compressor
> is located. It seemed to fix the problem at first, but after he left,
> the
> noise was back. I will spare you the details regarding the number of
> times I
> worked on this "infernal machine". Note: I am a consumer products
> service technician (repair TVs, etc.). It seems as though the "housing"
> (cabinet) resonates with the compressor vibration, thus "amplifying" the
> vibration noise. If I squeeze on the sides of the cabinet, the noise goes
> down. The degree of vibration noise seems to be dependent on the room
> temperature and humidity.
>
> I can't tell you how many times I felt like getting the sledge hammer
> and using it to fix the noise permanently, but where would I find a
> manual control, 50 pint dehumidifier?
>
> Before this Whirlpool, I had a quiet Goldstar dehumidifier (manual
> control) for many years. Eventually the compressor went bad. I was told
> it
> would be too expensive to get it repaired. Unfortunately, I put it out
> for
> trash, and I bought this Whirlpool.
>
> The reason I posted this is to warn you if you are thinking about
> buying
> a dehumidifier, go with another brand.
>
> John
>
> PS, Email address is not valid.
>

See what happens when retards use Ubuntu?

On Tue, 15 Sep 2009 07:36:38 -0400, wrote:


> I became very disappointed with it because of the vibration noise.

I had the same problem with my Whirlpool Dehumidifier Model
AD50DSS2. The vibration is caused by a cheap generic CPU fan. Just
replace it with a quality one from CoolerMaster, Thermalright etc and
your problem will be solved. You can find more information in the
Whirlpool Dehumidifier newsgroup.

Perry