Why does WMDC on Windows 7 not sync automatically?

ActiveSync (on Windows XP) used to start the synchronization with my WM
device automatically right after hooking up the device to the USB
connection. I had to plug in the USB plug (or put the device into the
cradle) and - a few seconds later - synchronization would start.

The Windows Mobile Device Center on Windows 7 doesn't start the
synchronization automatically. I always first have to manually open the WMDC
window and only then the sync starts. And sometimes not even then but I have
to click the green sync icon in the lower left to start the sync process.
And that's even though the dialog says "Connected" and displays a green
check-mark, but no sync taking place automatically!

I *do* have a "Sync Center" Icon sitting in the task bar. But that icon only
occasionally starts rotating when I connect my WM device. Why is that so?
And how do I get this "back to normal"? I want this thing to sync again the
moment I connect the device. Everything else is useless (and tedious)!

Michael

The sync concept didn't change with WMDC it changed around AS 4.0. There
used to be a 'continuous' sync, with a 'monitor' that detected when anything
changed on either the device or the PC, and sinked (sank, sunk?) that right
away. With AS 4.0 They went to a sync every 5 min whether you need it or not
concept. Personally, I hated (hate) that change, but it is what it is. I
don't think you really have to do anything to get the sync going, it just
doesn't always happen right away when you connect. If you here the initial
USB sound followed by the connect sound, it is actually connected and will
start syncing fairly shortly. You can see it happening on the device screen
at the top. The rotating arrows animate, and if you are doing something on
the device at the time, it slows to a crawl. Try just connecting and see if
it doesn't actually sync without you doing anything. Add a calendar entry on
the device for instance and see if that doesn't wind up on the PC after
about 5 min. I note to that if I hook up and then open WMDC later, it
appears as if it is having to connect, when it is actually already
connected. You should also notice a little blue dot on the Sync Center icon
when it syncs, and it may rotate.

"Michael Moser" <> wrote in message
news:2A452F11-D3DA-42F5-A2BF-...
> ActiveSync (on Windows XP) used to start the synchronization with my WM
> device automatically right after hooking up the device to the USB
> connection. I had to plug in the USB plug (or put the device into the
> cradle) and - a few seconds later - synchronization would start.
>
> The Windows Mobile Device Center on Windows 7 doesn't start the
> synchronization automatically. I always first have to manually open the
> WMDC window and only then the sync starts. And sometimes not even then but
> I have to click the green sync icon in the lower left to start the sync
> process. And that's even though the dialog says "Connected" and displays a
> green check-mark, but no sync taking place automatically!
>
> I *do* have a "Sync Center" Icon sitting in the task bar. But that icon
> only occasionally starts rotating when I connect my WM device. Why is that
> so? And how do I get this "back to normal"? I want this thing to sync
> again the moment I connect the device. Everything else is useless (and
> tedious)!
>
> Michael
>

You seem to be right. I noticed, that occasionally the task bar icon starts
"rotating" but couldn't figure out, why and when it would start. And
usually, when it didn't start within some (at least to me) reasonable time
after I had connected the device I would open WDMC and it then always told
me "Connecting" as if only starting it up had just triggered that connection
setup.

Michael

Well good. I've gotten used to it. Hopefully yours is working as it should,
even if it doesn't give you the warm fuzzy that it is actually working.

"Michael Moser" <> wrote in message
news:BADAF8B8-D50D-48DA-8EE5-...
> You seem to be right. I noticed, that occasionally the task bar icon
> starts "rotating" but couldn't figure out, why and when it would start.
> And usually, when it didn't start within some (at least to me) reasonable
> time after I had connected the device I would open WDMC and it then always
> told me "Connecting" as if only starting it up had just triggered that
> connection setup.
>
> Michael
>