Window Security Alerts

Whenever i urn on my notebook i get a message that "Automatic Update is turn
off.
Yet automatic update is tick on in the control panel.
I have also doe the following:
1. Click Start, and then click Run.
2. Type services.msc and then click OK.
3. In the list of services, double-click on Automatic Updates and then click
Properties.
4. In the Startup type list, select Automatic and click Apply.
5. Verify that the Service status is started, if the Service Status is
Stopped click on the Start Button.
6. In the list of services, double-click on Background Intelligent Transfer
Service (BITS) and then click Properties.
7. In the Startup type list, select Manual and click Apply.
8. Verify that the Service status is started, If the Service Status is
Stopped click on the Start Button.
9. In the list of services, double-click on Event Log and then click
Properties.
10. In the Startup type list, select Automatic and click Apply.
11. Verify that the Service status is started, If the Service Status is
Stopped click on the Start Button
Nothing has happened. What should i do?

Regards

Davis

Hello Davis,

t seems possible that your Windows installation has been deliberately
damaged by a trojan (Vundo, along any uninvited guests. (SDBot and ZLOB, all
protected by a rootkit.)) so as to prevent you updating your system or
removing the t�ojan.

A very good antimalware app is SUPERAntiSpyware.

There is a free version (on demand scanning only), the paid for version
includes active monitoring, similar to Windows defender:
<http://www.superantispyware.com/>

Have a look at this articles. It may be relevant to your problem.

The above explanation was for a previous Version of BITS but, there has been
an update for BITS since Vista came out.
<http://support.microsoft.com/kb/939159>

Is BITS disabled ? It can be set to Manual and the system will update
successfully but, will not update if BITS is Disabled.
Suggest you run the BITS Repair Tool to see if that helps resolve the issue
after installing the update for it:
<http://support.microsoft.com/kb/940520>

This will give you a starting point for your troubleshooting anyway.

Please let us know if the problem �emains

Ǝиçεl
-=-


"Davis Chilalama" wrote:

> Whenever i urn on my notebook i get a message that "Automatic Update is turn
> off.
> Yet automatic update is tick on in the control panel.
> I have also doe the following:
> 1. Click Start, and then click Run.
> 2. Type services.msc and then click OK.
> 3. In the list of services, double-click on Automatic Updates and then click
> Properties.
> 4. In the Startup type list, select Automatic and click Apply.
> 5. Verify that the Service status is started, if the Service Status is
> Stopped click on the Start Button.
> 6. In the list of services, double-click on Background Intelligent Transfer
> Service (BITS) and then click Properties.
> 7. In the Startup type list, select Manual and click Apply.
> 8. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
> 9. In the list of services, double-click on Event Log and then click
> Properties.
> 10. In the Startup type list, select Automatic and click Apply.
> 11. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button
> Nothing has happened. What should i do?
>
> Regards
>
> Davis

There's a very strong possibility that the problem is due to a hijackware
infection.

1. See if you can download/run the MSRT manually:
http://www.microsoft.com/security/ma...e/default.mspx

2. Run this online scan (in safe mode w/networking, if need be):
http://onecare.live.com/site/en-us/center/howsafe.htm

3. Run additional checks for hijackware, including posting your hijackthis
log to an appropriate forum.

Checking for/Help with Hijackware
http://aumha.org/a/parasite.htm
http://aumha.org/a/quickfix.htm
http://aumha.net/viewtopic.php?t=5878
http://wiki.castlecops.com/Malware_R...:_Introduction
http://mvps.org/winhelp2002/unwanted.htm
http://inetexplorer.mvps.org/data/prevention.htm
http://inetexplorer.mvps.org/tshoot.html
http://www.mvps.org/sramesh2k/Malware_Defence.htm
http://defendingyourmachine2.blogspot.com/
http://www.elephantboycomputers.com/...moving_Malware

When all else fails, HijackThis v2.0.2
(http://aumha.org/downloads/hijackthis.exe) is the preferred tool to use (in
conjuction with some other utilities). HijackThis will NOT fix anything on
its own, but it will help you to both identify and remove any
hijackware/spyware with assistance from an expert. **Post your log to
http://spywarehammer.com/simplemachi...php?board=10.0,
http://forums.spybot.info/forumdisplay.php?f=22,
http://aumha.net/viewforum.php?f=30, or another appropriate forum for review
by an expert in such matters, not here.**

If the procedures look too complex - and there is no shame in admitting this
isn't your cup of tea - take the machine to a local, reputable and
independent (i.e., not BigBoxStoreUSA) computer repair shop.
=====================
Start a free Windows Update support incident request:
https://support.microsoft.com/oas/de...spx?gprid=6527

Support for Windows Update:
http://support.microsoft.com/gp/wusupport

For home users, no-charge support is available by calling 1-866-PCSAFETY in
the United States and in Canada or by contacting your local Microsoft
subsidiary. There is no-charge for support calls that are associated with
security updates.
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Davis Chilalama wrote:
> Whenever i urn on my notebook i get a message that "Automatic Update is
> turn
> off.
> Yet automatic update is tick on in the control panel.
> I have also doe the following:
> 1. Click Start, and then click Run.
> 2. Type services.msc and then click OK.
> 3. In the list of services, double-click on Automatic Updates and then
> click
> Properties.
> 4. In the Startup type list, select Automatic and click Apply.
> 5. Verify that the Service status is started, if the Service Status is
> Stopped click on the Start Button.
> 6. In the list of services, double-click on Background Intelligent
> Transfer
> Service (BITS) and then click Properties.
> 7. In the Startup type list, select Manual and click Apply.
> 8. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button.
> 9. In the list of services, double-click on Event Log and then click
> Properties.
> 10. In the Startup type list, select Automatic and click Apply.
> 11. Verify that the Service status is started, If the Service Status is
> Stopped click on the Start Button
> Nothing has happened. What should i do?
>
> Regards
>
> Davis