Windows Server 2008 RRAS trouble

Hi all

I've a Windows Server 2008 SP2 (not R2) with two NIC that are connected to
two different subnet:

192.168.1.0/24 it is the office LAN
172.18.0.0/24 it is an intranet

this server acts as a router for the LAN's PCs for the route to 178 subnet.
Sometimes RRAS stop working and when thi happens:

into the NAT statistics windows I read no values but only dashes "-"
Restarting RRAS services has no effect, the event viewer logs this event:

ID 2016
Source: RemoteAccess
Unable to add the interface Internal with the Router Manager for the IPV6
protocol. The following error occurred: The parameter is incorrect.

The only way I have to restore RRAS is disabling and re-enablig RRAS! Please
help!

RRAS service is design for IPv4 protocol, please disable IPv6 protocol for
Internal interface. This post may help:
NAT stops functioning after a reboot -
http://chicagotech.net/netforums/vie...6fa287b#p15495

--
Bob Lin, Microsoft-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com


"Andrea Caldarone" <> wrote in message
news:3E5E1978-0F23-43B7-BF6B-...
> Hi all
>
> I've a Windows Server 2008 SP2 (not R2) with two NIC that are connected to
> two different subnet:
>
> 192.168.1.0/24 it is the office LAN
> 172.18.0.0/24 it is an intranet
>
> this server acts as a router for the LAN's PCs for the route to 178
> subnet.
> Sometimes RRAS stop working and when thi happens:
>
> into the NAT statistics windows I read no values but only dashes "-"
> Restarting RRAS services has no effect, the event viewer logs this event:
>
> ID 2016
> Source: RemoteAccess
> Unable to add the interface Internal with the Router Manager for the IPV6
> protocol. The following error occurred: The parameter is incorrect.
>
> The only way I have to restore RRAS is disabling and re-enablig RRAS!
> Please help!
>
>