Windows Update has a error

Same deal here but with error code: [Error number: 0xC8000152]

"George" wrote:

> Display a error message when i choose "Express Install(Recommended):High
> Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
> "Windows Update has encountered an error and cannot display the requested
> page.You may find the following resources helpful in resolving the
> problem:".
> Any help is much appreciated!
>
>
>

Don't feel bad, seems to be a common issue among hundreds of problems
associated with the release of sp2. Mine reads error message 807043B for
with there are no related articles to at least trouble shoot from. In
despiration I have tried some that were closely related but no luck, even
running a sfc /scannow to check on the integrity of some of system files
brings up insert sp2 disk which oddly enough was done from a download, so go
figure. There has got to be a better alternative to such a strange rollout
of a desperately needed product.

"John" wrote:

> Same deal here but with error code: [Error number: 0xC8000152]
>
> "George" wrote:
>
> > Display a error message when i choose "Express Install(Recommended):High
> > Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
> > "Windows Update has encountered an error and cannot display the requested
> > page.You may find the following resources helpful in resolving the
> > problem:".
> > Any help is much appreciated!
> >
> >
> >

hamman_4 wrote:

> Don't feel bad, seems to be a common issue among hundreds of problems
> associated with the release of sp2. Mine reads error message 807043B for
> with there are no related articles to at least trouble shoot from. In
> despiration I have tried some that were closely related but no luck, even
> running a sfc /scannow to check on the integrity of some of system files
> brings up insert sp2 disk which oddly enough was done from a download, so go
> figure. There has got to be a better alternative to such a strange rollout
> of a desperately needed product.
>
> "John" wrote:
>
>
>>Same deal here but with error code: [Error number: 0xC8000152]
>>
>>"George" wrote:
>>
>>
>>>Display a error message when i choose "Express Install(Recommended):High
>>>Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
>>>"Windows Update has encountered an error and cannot display the requested
>>>page.You may find the following resources helpful in resolving the
>>>problem:".
>>>Any help is much appreciated!
>>>
>>>
>>>

Download the full network install of 266 MB or get a free CD. They are
available at a variety of outlets like Staples and attached to the cover
of many current PC magazines. Or order the free CD from MS. Delivery
is usually within a week.

I did not even install SP2, I buypassed it due to the firewall issues. I only
tried to do all the normal required installs. The downloads seemed to hang
and when I re-connect I get the error you got. tried a couple of fixes in the
Update troubleshooter but they didn't help. the only alternative they left me
with was to go to system restore and go back to an earlier version and try
again.

"hamman_4" wrote:

> Don't feel bad, seems to be a common issue among hundreds of problems
> associated with the release of sp2. Mine reads error message 807043B for
> with there are no related articles to at least trouble shoot from. In
> despiration I have tried some that were closely related but no luck, even
> running a sfc /scannow to check on the integrity of some of system files
> brings up insert sp2 disk which oddly enough was done from a download, so go
> figure. There has got to be a better alternative to such a strange rollout
> of a desperately needed product.
>
> "John" wrote:
>
> > Same deal here but with error code: [Error number: 0xC8000152]
> >
> > "George" wrote:
> >
> > > Display a error message when i choose "Express Install(Recommended):High
> > > Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
> > > "Windows Update has encountered an error and cannot display the requested
> > > page.You may find the following resources helpful in resolving the
> > > problem:".
> > > Any help is much appreciated!
> > >
> > >
> > >

Try fixing your PC clock !

At the time of my post it is 2338hrs on the 18th not 2143hrs on the 19th.

Dave



"George" <> wrote in message
news:%...
| Display a error message when i choose "Express Install(Recommended):High
| Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
| "Windows Update has encountered an error and cannot display the requested
| page.You may find the following resources helpful in resolving the
| problem:".
| Any help is much appreciated!
|
|

sounds like you have firewall blocking it...not sure what program you use but
Norton Internet Security will give you that error. Try turning it off before
you have the update page check your computer for necessary updates. I did
that and the update was fine afterwards.

"George" wrote:

> Display a error message when i choose "Express Install(Recommended):High
> Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
> "Windows Update has encountered an error and cannot display the requested
> page.You may find the following resources helpful in resolving the
> problem:".
> Any help is much appreciated!
>
>
>

Display a error message when i choose "Express Install(Recommended):High
Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
"Windows Update has encountered an error and cannot display the requested
page.You may find the following resources helpful in resolving the
problem:".
Any help is much appreciated!

Sorry,I have used (GMT+08:00)Beijing,Chongqing,Hongkong,Urumqi.I will change
it next time.

--
Regards
"David H. Lipman" <DLipman~nospam~@Verizon.Net> wrote in message
news:...
> Try fixing your PC clock !
>
> At the time of my post it is 2338hrs on the 18th not 2143hrs on the 19th.
>
> Dave
>
>
>
> "George" <> wrote in message
> news:%...
> | Display a error message when i choose "Express Install(Recommended):High
> | Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
> | "Windows Update has encountered an error and cannot display the
> requested
> | page.You may find the following resources helpful in resolving the
> | problem:".
> | Any help is much appreciated!
> |
> |
>
>

Hi friends,
When searching for available updates on the Windows Update site, you see the
0x8007043B error, than try the solution given below... if ya issue is
resolved, dont forget to thank me !!

suraj


Problem description
This error may occur if the WUAUSERV and BITS services are not configured
properly in the registry.

Applicable operating systems
Windows 2000
Windows XP
Windows Server 2003

Resolutions
1. Add WUAUSERV and BITS to the SvcHost process
Click Start.
Choose Run.
In the Run box, type REGEDIT.
Click OK.
The Registry Editor opens.
*WARNING*
Using Registry Editor incorrectly can cause serious problems that may
require you to reinstall your operating system. Microsoft cannot guarantee
that problems resulting from the incorrect use of Registry Editor can be
solved. Use Registry Editor at your own risk.
Navigate to the following
key:HKEY_Local_Machine\Software\Microsoft\WindowsN T\CurrentVersion\SvcHost.
Double-click to open the netsvcs key.
Under Value Data.
Add BITS and WUAUSERV to the list of services.
Click OK.
Exit the registry.
Restart the system.

Thanks for taking ya time to try.
regards,
suraj
"Rock" wrote:

> hamman_4 wrote:
>
> > Don't feel bad, seems to be a common issue among hundreds of problems
> > associated with the release of sp2. Mine reads error message 807043B for
> > with there are no related articles to at least trouble shoot from. In
> > despiration I have tried some that were closely related but no luck, even
> > running a sfc /scannow to check on the integrity of some of system files
> > brings up insert sp2 disk which oddly enough was done from a download, so go
> > figure. There has got to be a better alternative to such a strange rollout
> > of a desperately needed product.
> >
> > "John" wrote:
> >
> >
> >>Same deal here but with error code: [Error number: 0xC8000152]
> >>
> >>"George" wrote:
> >>
> >>
> >>>Display a error message when i choose "Express Install(Recommended):High
> >>>Priority Updates for Your computer",it's "Error number: 0xC80003FA" and
> >>>"Windows Update has encountered an error and cannot display the requested
> >>>page.You may find the following resources helpful in resolving the
> >>>problem:".
> >>>Any help is much appreciated!
> >>>
> >>>
> >>>
>
> Download the full network install of 266 MB or get a free CD. They are
> available at a variety of outlets like Staples and attached to the cover
> of many current PC magazines. Or order the free CD from MS. Delivery
> is usually within a week.
>
>

suraj mandrekar wrote:

> Hi friends,
> When searching for available updates on the Windows Update site, you see the
> 0x8007043B error, than try the solution given below... if ya issue is
> resolved, dont forget to thank me !!

Note that the text quoted below is from the Windows Update v5 Trouble
shouter Web site, in this link:

When searching for available updates on the Windows Update site, you
see the 0x8007043B error
http://v5.windowsupdate.microsoft.co...cleid=19&ln=en

For a VBScript that does what the article in the link above describes,
take a look here (just put the VBScript code in a file and run it by
double clicking on it):

http://groups.google.com/groups?selm...TNGP15.phx.gbl


> Problem description
> This error may occur if the WUAUSERV and BITS services are not configured
> properly in the registry.
>
> Applicable operating systems
> Windows 2000
> Windows XP
> Windows Server 2003
>
> Resolutions
> 1. Add WUAUSERV and BITS to the SvcHost process
> Click Start.
> Choose Run.
> In the Run box, type REGEDIT.
> Click OK.
> The Registry Editor opens.
> *WARNING*
> Using Registry Editor incorrectly can cause serious problems that may
> require you to reinstall your operating system. Microsoft cannot guarantee
> that problems resulting from the incorrect use of Registry Editor can be
> solved. Use Registry Editor at your own risk.
> Navigate to the following
> key:HKEY_Local_Machine\Software\Microsoft\WindowsN T\CurrentVersion\SvcHost.
> Double-click to open the netsvcs key.
> Under Value Data.
> Add BITS and WUAUSERV to the list of services.
> Click OK.
> Exit the registry.
> Restart the system.
>
> Thanks for taking ya time to try.
> regards,
> suraj


--
torgeir, Microsoft MVP Scripting and WMI, Porsgrunn Norway
Administration scripting examples and an ONLINE version of
the 1328 page Scripting Guide:
http://www.microsoft.com/technet/scr...r/default.mspx