WinSP3 BSOD, Endless Reboot

After installing SP3, I have one workstation fail out of 5 with the BSoD of
Stop C000139 on GDI32.dll

Pressing F8 and picking "Disable auto restart on failure" showed me the error.
I thought MS had worked for weeks to fix this error... apparently they didn't.

This machine is a Dell 745 with an Intel chipset.

All the post i read about this error was for Non-Intel based systems...
apparently that is wrong too....

I guess i will be restoring the GDI32.dll from the service pack to fix this
system now... geez

http://www.tipandtrick.net/2008/wind...di32dll-error/

Continual reboots or can only boot into Safe Mode after installing WinXP
SP3?

Workarounds:

1. Boot into Safe Mode and rename INTELPMM.SYS to INTELPMM.OLD.

2. After booting into Safe Mode:

Start | Run | (copy/paste) sc config intelppm start= disabled | OK | Reboot
into normal (Windows) mode.

Other references include:

• http://aumha.net/viewtopic.php?p=187790#p187790

•
http://msinfluentials.com/blogs/jesp...ng-xp-sp3.aspx

• http://www.theregister.co.uk/2008/05...boots_crashes/

• You receive a “Stop 0x0000007E� error message after you upgrade to Windows
XP Service Pack 2 or Service Pack 3 on a non-Intel-processor-based computer
(Revised 06 May-08)
http://support.microsoft.com:80/kb/888372
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Tim_S wrote:
> After installing SP3, I have one workstation fail out of 5 with the BSoD
> of
> Stop C000139 on GDI32.dll
>
> Pressing F8 and picking "Disable auto restart on failure" showed me the
> error. I thought MS had worked for weeks to fix this error... apparently
> they didn't.
>
> This machine is a Dell 745 with an Intel chipset.
>
> All the post i read about this error was for Non-Intel based systems...
> apparently that is wrong too....
>
> I guess i will be restoring the GDI32.dll from the service pack to fix
> this
> system now... geez
>
> http://www.tipandtrick.net/2008/wind...di32dll-error/

Hit there,

Installed it here on 3 AMD systems 2 X264 and one socket A and one intel
Core Duo system without any problem, I however never use registry cleaners,
any cleaning if needed is done by hand.

So I guess something must be conflicting in your system?

It is undoable to test all relaesed software on a service pack.

Best regards,
Michel Denie


"Tim_S" <> wrote in message
news:64AE717C-1AF9-47B2-9512-...
> After installing SP3, I have one workstation fail out of 5 with the BSoD
> of
> Stop C000139 on GDI32.dll
>
> Pressing F8 and picking "Disable auto restart on failure" showed me the
> error.
> I thought MS had worked for weeks to fix this error... apparently they
> didn't.
>
> This machine is a Dell 745 with an Intel chipset.
>
> All the post i read about this error was for Non-Intel based systems...
> apparently that is wrong too....
>
> I guess i will be restoring the GDI32.dll from the service pack to fix
> this
> system now... geez
>
> http://www.tipandtrick.net/2008/wind...di32dll-error/
>

It's no just limited to AMD machines, Kerry. It's been seen in many OEM
installs of WinXP where Sysprep was used. See
http://support.microsoft.com/kb/888372
--
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Desktop Experience - since 2002
AumHa VSOP & Admin http://aumha.net
DTS-L http://dts-l.net/

Kerry Hoskin wrote:
> Similair here, tested SP3 on 4 DELL GX620's these are NOT AMD based. Two
> failed, one constantly reboots the other fails with 0x0000007, this is NOT
> just an AMD issue.
>
>
> "Tim_S" <> wrote in message
> news:64AE717C-1AF9-47B2-9512-...
>> After installing SP3, I have one workstation fail out of 5 with the BSoD
>> of
>> Stop C000139 on GDI32.dll
>>
>> Pressing F8 and picking "Disable auto restart on failure" showed me the
>> error.
>> I thought MS had worked for weeks to fix this error... apparently they
>> didn't.
>>
>> This machine is a Dell 745 with an Intel chipset.
>>
>> All the post i read about this error was for Non-Intel based systems...
>> apparently that is wrong too....
>>
>> I guess i will be restoring the GDI32.dll from the service pack to fix
>> this
>> system now... geez
>>
>> http://www.tipandtrick.net/2008/wind...di32dll-error/