XP Update Site Fails

I recieve an error when I go to the Microsoft I recieve 0014-8007007E,
right away. I tried some of the microsoft fixes,When I run regsvr32
Inseng.dll, I get this message dllregisterServer entry point was not found.
What does the error mean and how can I resolve the issue.
I think the error may be with the Inseng.dll, but what could cause it to
fail to register.
Thanks

NB: for IE7 - regsvr32 "C:\windows\ie7\Inseng.dll"

--
====================================
TaurArian [MS-MVP] 2005-2008 - Australia
====================================
How to make a good post: http://www.dts-l.org/goodpost.htm
Defending your machine: http://defendingyourmachine2.blogspot.com/
http://taurarian.mvps.org/index.htm

Emails will not be acknowledged - please post to the newsgroup so all may benefit.


"Joe Medford" <> wrote in message
news3ADEC5C-C9BF-4EFD-835E-...
|I recieve an error when I go to the Microsoft I recieve 0014-8007007E,
| right away. I tried some of the microsoft fixes,When I run regsvr32
| Inseng.dll, I get this message dllregisterServer entry point was not found.
| What does the error mean and how can I resolve the issue.
| I think the error may be with the Inseng.dll, but what could cause it to
| fail to register.
| Thanks
|

This registeed without any issues.
May main error still exists.
Thanks

"TaurArian [MS-MVP]" <> wrote in message
news:...
> NB: for IE7 - regsvr32 "C:\windows\ie7\Inseng.dll"
>
> --
> ====================================
> TaurArian [MS-MVP] 2005-2008 - Australia
> ====================================
> How to make a good post: http://www.dts-l.org/goodpost.htm
> Defending your machine: http://defendingyourmachine2.blogspot.com/
> http://taurarian.mvps.org/index.htm
>
> Emails will not be acknowledged - please post to the newsgroup so all may
> benefit.
>
>
> "Joe Medford" <> wrote in message
> news3ADEC5C-C9BF-4EFD-835E-...
> |I recieve an error when I go to the Microsoft I recieve 0014-8007007E,
> | right away. I tried some of the microsoft fixes,When I run regsvr32
> | Inseng.dll, I get this message dllregisterServer entry point was not
> found.
> | What does the error mean and how can I resolve the issue.
> | I think the error may be with the Inseng.dll, but what could cause it to
> | fail to register.
> | Thanks
> |
>
>

"TaurArian [MS-MVP]" <> schrieb:

> NB: for IE7 - regsvr32 "C:\windows\ie7\Inseng.dll"

Ehm, that would register the IE6 version of the insend.dll and
not the one used by IE7. The inseng.dll used by IE7 can't be
registered via regsvr32 at all.

FWIW,
Freudi

"Joe Medford" <> schrieb:

>I recieve an error when I go to the Microsoft I recieve 0014-8007007E,
> right away. I tried some of the microsoft fixes,When I run regsvr32

Ehm, what about "scf /scannow"? See http://support.microsoft.com/kb/831429
and use the steps for Windows XP and *not* for Windows 2000 mentioned
there.

Bye,
Freudi

done that and nothing

"Ottmar Freudenberger" <> wrote in message
news:...
> "Joe Medford" <> schrieb:
>
>>I recieve an error when I go to the Microsoft I recieve 0014-8007007E,
>> right away. I tried some of the microsoft fixes,When I run regsvr32
>
> Ehm, what about "scf /scannow"? See http://support.microsoft.com/kb/831429
> and use the steps for Windows XP and *not* for Windows 2000 mentioned
> there.
>
> Bye,
> Freudi

"Joe Medford" <> schrieb:

>> Ehm, what about "scf /scannow"? See http://support.microsoft.com/kb/831429
>> and use the steps for Windows XP and *not* for Windows 2000 mentioned
>> there.

> done that and nothing

You've restarted Windows afterwards?

Which error codes do you find in the "windowsupdate.log" file in the
last 50 lines?

Bye,
Freudi

Yes I have restarted Windows.
The error code I see is, 0x8007007E.

2007-08-22 13:03:22:921 1064 568 Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2007-08-22 13:03:22:953 1064 568 Misc Microsoft signed: Yes
2007-08-22 13:03:22:953 1064 568 PT + Last proxy send request succeeded
2007-08-22 13:03:22:953 1064 568 PT WARNING: GetConfig failure, error =
0x8007007E, soap client error = 5, soap error code = 0, HTTP status code =
200
2007-08-22 13:03:22:953 1064 568 PT WARNING: PTError: 0x8007007e
2007-08-22 13:03:22:953 1064 568 PT WARNING: GetConfig_WithRecovery failed:
0x8007007e
2007-08-22 13:03:22:953 1064 568 PT WARNING: RefreshConfig failed:
0x8007007e
2007-08-22 13:03:22:953 1064 568 PT WARNING: RefreshPTState failed:
0x8007007e
2007-08-22 13:03:22:953 1064 568 PT WARNING: PTError: 0x8007007e
2007-08-22 13:03:22:953 1064 568 Misc Validating signature for
C:\WINDOWS\SoftwareDistribution\WuRedir\9482F4B4-E343-43B6-B170-9A65BC822C77\wuredir.cab:
2007-08-22 13:03:22:968 1064 568 Misc Microsoft signed: Yes



"Ottmar Freudenberger" <> wrote in message
news:...
> "Joe Medford" <> schrieb:
>
>>> Ehm, what about "scf /scannow"? See
>>> http://support.microsoft.com/kb/831429
>>> and use the steps for Windows XP and *not* for Windows 2000 mentioned
>>> there.
>
>> done that and nothing
>
> You've restarted Windows afterwards?
>
> Which error codes do you find in the "windowsupdate.log" file in the
> last 50 lines?
>
> Bye,
> Freudi

"Joe Medford" <> schrieb:

> Yes I have restarted Windows.
> The error code I see is, 0x8007007E.

Still? Oerks. A simple "regsvr32 msxml3.dll" doesn't help also, does it?

> 2007-08-22 13:03:22:953 1064 568 PT WARNING: GetConfig failure, error =
> 0x8007007E, soap client error = 5, soap error code = 0, HTTP status code =
> 200
> 2007-08-22 13:03:22:953 1064 568 PT WARNING: PTError: 0x8007007e
> 2007-08-22 13:03:22:953 1064 568 PT WARNING: GetConfig_WithRecovery failed:
> 0x8007007e

Hm, and a simple "proxycfg -u" doesn't help either, true?

Bye,
Freudi

Didn't help either, I created a slipstream SP2 disk for XP home, and did a
repair, which resolved the issue. This is the 2nd computer that had an
Microsoft Update issue. My first computer I saw this year, was able to be
fixed by what you mensioned above.
Thanks for all your help

"Ottmar Freudenberger" <> wrote in message
news:...
> "Joe Medford" <> schrieb:
>
>> Yes I have restarted Windows.
>> The error code I see is, 0x8007007E.
>
> Still? Oerks. A simple "regsvr32 msxml3.dll" doesn't help also, does it?
>
>> 2007-08-22 13:03:22:953 1064 568 PT WARNING: GetConfig failure, error =
>> 0x8007007E, soap client error = 5, soap error code = 0, HTTP status code
>> =
>> 200
>> 2007-08-22 13:03:22:953 1064 568 PT WARNING: PTError: 0x8007007e
>> 2007-08-22 13:03:22:953 1064 568 PT WARNING: GetConfig_WithRecovery
>> failed:
>> 0x8007007e
>
> Hm, and a simple "proxycfg -u" doesn't help either, true?
>
> Bye,
> Freudi