4GB Ram Installed / Total Physical Ram = 2.75GB?

Discussion in 'Windows Vista Hardware' started by Impulse, Jul 14, 2008.

  1. Impulse

    Impulse Guest

    System Information, I get the above
    Why is not display 4GB as total? I could understand if it was 3.5g
    because I have a 512mb 9800gtx in there, but where's the rest going
    Memory remapping in bios isn't an option cause it's not there in th
    The bios is detecting the full 4g
    And before you ask, I'm running Vista Ultimate x64.
    I've tried updating the bios, but the updater isn't working at th
    moment, I'm waiting for a reply from XFX in regards to that

    Any help would be much appreciated

    Motherboard: XFX nForce 780
    CPU: Intel Core 2 Duo Q9300 @ 2.5 ghz (stock
    Ram: 4gb (2x2gb) ocz pc6400 (800mhz) ddr2 gold serie
    GFX: Inno3D 9800gtx overclock (single
    PSU: OCZ EliteXstream 800
    Impulse, Jul 14, 2008
    1. Advertisements

  2. You might also ask in microsoft.public.windows.64bit.general since this gets
    discussed there often enough.
    Colin Barnhorst, Jul 14, 2008
    1. Advertisements

  3. Impulse

    Impulse Guest

    Okay, I realised that it's going to shared system memory, as shown by
    [image: http://i34.tinypic.com/esuttc.jpg]

    New question: How do I reduce shared memory? I've googled for it but I
    can't find anything useful.
    Impulse, Jul 15, 2008
  4. Impulse

    skunksmash Guest

    hi impulse
    im sure brink will be along shortly with the answer..
    sure there is a tutorial for it ....you'll be hard pushed to find a
    vista config he has not covered...:)


    E2180 @ 3.2ghz
    arctic cooler pro 775
    4GB gskill HZ @ 1050mhz
    Asus P5K premium
    160GB seagate 7200
    coloursit 600w psu
    PNY 8800GT 512mb
    skunksmash, Jul 15, 2008

  5. That may be a BIOS setting. Check.
    Colin Barnhorst, Jul 15, 2008
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.