A possible fix for RC1 burning problems

Discussion in 'Windows Vista Installation' started by Roman, Sep 13, 2006.

  1. Roman

    Roman Guest


    I was having difficulty, as many others appear to be, at burning the RC1 ISO
    - although I had no problems with Beta 2. I used Nero 7 with a burn speed of
    1x but was getting verification errors. The only change that I can see is
    that I think I was using Nero 6 for Beta 2, beyond that I don't think
    anything has changed. After 3 failures I decided to try something else.

    I downloaded ImgBurn, a freeware product, which is only about 1.7Mb in size.
    I was dubious about its small size but, not only did I succeed in burning RC1
    on the first try, it did the burn at 4x and provided the correct MD5 in the
    log after verification. I also had to use a DVD-RW because I had no normal
    disks left.

    As for RC1 itself, I don't know yet, the upgrade is almost complete but I
    thought I'd get this info out there. If you're having trouble, its worth a
    go. Good luck!

    Roman, Sep 13, 2006
    1. Advertisements

  2. Roman

    Paul H Guest

    I cant believe so many people are having problems getting vista onto a
    bootable DVD. Solution - locate your downloaded ISO file and right click it
    - in the resulting box select " open with" then select "choose programme" and
    select nero burning ROM (nero 6 with latest updates works fine) this will
    open burning ROM with your vista file loaded and click burn (having placed a
    blank DVD -R will do fine) - Done!!
    Paul H, Sep 13, 2006
    1. Advertisements

  3. Roman

    saladbar Guest

    I used Nero 7 to burn RC1 and had no problem. You can't burn it as an ISO DVD
    you need to burn it as a UDF DVD because of the size.
    saladbar, Sep 13, 2006
  4. Roman

    D.Dennis Guest

    I was able to run the RC1 install from an external USB hard-drive using
    DAEMON software without burning a DVD.
    D.Dennis, Sep 14, 2006
  5. Roman

    chillycat Guest

    Jeeeeeeeeeeeeeez........ shocking that folks are still [after all these
    years] having problems burning ISO's.

    DVDDecrypter IS the easiest way and works 100% EVERYTIME.

    Worked for me and everyone else thats EVER used it.
    chillycat, Sep 14, 2006
  6. Roman

    Trevor Guest

    Ok, so I downloaded RC 1 and then used DVD decryp to burn the file to a
    DVD-R, but then whenever I took the DVD out and then put it back in to
    install, it said that "My Computer cannot run this version of the Operating
    System. Can anybody help?
    Trevor, Nov 4, 2006
  7. Roman

    Trevor Guest

    Fixed my problem.
    Trevor Davis

    Trevor, Nov 4, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.