Administrator doesn't have access rights to Logical Disk Manager

Discussion in 'Clustering' started by J DIlks Jr., Feb 28, 2005.

  1. J DIlks Jr.

    J DIlks Jr. Guest

    After correcting problem where server 2003 standard thought it was part of a
    cluster, I still can't access the Logical Disk manager. I keep getting told
    that I do not have access rights to the Logical Disk Manager.
     
    J DIlks Jr., Feb 28, 2005
    #1
    1. Advertisements

  2. Hi J,

    Is this the issue you're running it to?

    When you start the Logical Disk Manager (LDM) MMC snap-in, you may get the
    following error message:

    Can't create connection to server SERVERNAME.

    You may also receive Error Code 80070005:

    Access is denied.

    If so, then check if one of the following items resolves your problem,:

    - Make sure you are logged on with administrator rights.

    - Check that the Logical Disk Manager service is started. To check the
    service, go to Administrative Tools and select System Service
    Management. If LDM is NOT started, right-click it and select Start. Note
    any error messages.

    - Run hardware diagnostics and check cables and termination in your drive
    chain.

    --
    Hope this helps,
    Mike Rosado
    Windows 2000 MCSE + MCDBA
    Microsoft Enterprise Platform Support
    Windows NT/2000/2003 Cluster Technologies

    ====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    ====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    <http://www.microsoft.com/info/cpyright.htm>

    -----Original Message-----
     
    Mike Rosado [MSFT], Mar 3, 2005
    #2
    1. Advertisements

  3. J DIlks Jr.

    J DIlks Jr. Guest

    I am logged on as a member of the Administrators Group of the machine. When I
    run "Computer Management" and select "Disk Management", I get a message "You
    do not have access rights to Logical Disk Manager on PCC-PE2600-001". The
    message is from the LDM.

    LDM is started. I have stopped and started it. No errors.

    This problem occured when the computer decided it was part of a cluster. The
    computer had been running about eight months as a "Windows Server 2003
    Standard" with no problems. Per another posting here, I modified the registry
    to get it to recognize that it was not part of a cluster. But, that mod did
    not get it to let me back into the LDM.
     
    J DIlks Jr., Mar 3, 2005
    #3
  4. Hi J,

    Have you tried the resolutions steps outlined in the following article yet?

    264910 Access to Disk Manager Is Denied
    http://support.microsoft.com/?id=264910

    --
    Hope this helps,
    Mike Rosado
    Windows 2000 MCSE + MCDBA
    Microsoft Enterprise Platform Support
    Windows NT/2000/2003 Cluster Technologies

    ====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    ====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    <http://www.microsoft.com/info/cpyright.htm>

    -----Original Message-----
     
    Mike Rosado [MSFT], Mar 3, 2005
    #4
  5. Hi J,

    Have you tried the resolutions steps outlined in the following article yet?

    264910 Access to Disk Manager Is Denied
    http://support.microsoft.com/?id=264910

    --
    Hope this helps,
    Mike Rosado
    Windows 2000 MCSE + MCDBA
    Microsoft Enterprise Platform Support
    Windows NT/2000/2003 Cluster Technologies

    ====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    ====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    <http://www.microsoft.com/info/cpyright.htm>

    -----Original Message-----
     
    Mike Rosado [MSFT], Mar 3, 2005
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.