Companyweb after SP1 - Web Part Error

Discussion in 'Windows Small Business Server' started by Grant Morgan, Mar 6, 2006.

  1. Grant Morgan

    Grant Morgan Guest

    Hi

    After applying SBS2003 SP1 (Premium) everything is great, except the
    companyweb website.

    On each web part on every page, the following message is displayed:
    "Web Part Error: This page has encountered a critical error. Contact your
    system administrator if this problem persists"

    I have checked the event log, and found the following message:
    Event Type: Error
    Event Source: Windows SharePoint Services 2.0
    Event Category: (1)
    Event ID: 1000
    Description:
    The safe mode service of Windows SharePoint Services has failed to
    initialize because of an unknown error.


    I have tried doing a repair on Sharepoint Services, but there is no change.

    Does anyone know what could be causing this...

    Cheers
    Grant
     
    Grant Morgan, Mar 6, 2006
    #1
    1. Advertisements

  2. Grant Morgan

    Crina Li Guest

    Hi Grant,

    Thank you for posting in SBS newsgroup.

    From the description, I understand the issue to be: you receive error
    message when you access companyweb after install SBS 2003 SP1. If I have
    misunderstood your concerns, please do not hesitate to let me know.

    AS I know, you may have the issue once installing .Net Framework 2.0. You
    may have to change the .Net Framework back to 1.1.4322 on the site or
    virtual directories. Please do as following:

    1. Open the IIS management snap-in.
    2. Go to the properties of companyweb.
    3. Go to the ASP.NET tab.
    4. On the ASP.NET version select the drop-down and change from the
    2.0.50727 to 1.1.4322.
    5. Apply and close out the properties.
    6. Browse companyweb.

    If you want to run companyweb on ASP.NET 2.0.50727 you will need to upgrade
    run the following sharepoint command:

    stsadm.exe -o upgrade -forceupgrade -url http://companyweb

    See 894903 for more information.

    894903 You receive a "The Windows SharePoint Services virtual server has not
    http://support.microsoft.com/?id=894903

    If running this command does not fix the issue, then you will need to
    confirm that your WSS is actually at SP2.

    1. Start SharePoint Central Administration.
    2. Under "Virtual Server Configuration" on the Windows SharePoint Services
    Central Administration page, click "Configure virtual server settings".
    3. Under "Version" on the Virtual Server List page, note the version number
    that is listed for the virtual server, and then use one of the following
    methods, depending on your situation:

    The version numbers are listed as follows:

    6.0.2.5530 is the version number of the virtual server in the
    original release version of Windows SharePoint Services.

    6.0.2.6361 is the version number of the virtual server in Windows
    SharePoint Services Service Pack 1 (SP1).

    6.0.2.6411 is the version number of the virtual server in Windows
    SharePoint Services that has the security update installed that is
    described in the following article in the Microsoft Knowledge Base:

    887981 MS05-006: Vulnerability in Windows SharePoint Services and
    SharePoint Team Services could allow cross-site scripting and spoofing
    attacks
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;887981

    6.0.2.6568 is the version number of the virtual server in Windows
    SharePoint Services Service Pack 2 (SP2).

    If the version number is less than 6.0.2.6568, the virtual server is not
    at SP2. Please go to Microsoft site and download the WSS SP2. After
    installing it you will be able to access companyweb.

    I appreciate your time and look forward to hearing from you.

    Best regards,

    Crina Li (MSFT)

    Microsoft CSS Online Newsgroup Support

    Get Secure! - www.microsoft.com/security

    =====================================================
    This newsgroup only focuses on SBS technical issues. If you have issues
    regarding other Microsoft products, you'd better post in the corresponding
    newsgroups so that they can be resolved in an efficient and timely manner.
    You can locate the newsgroup here:
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

    When opening a new thread via the web interface, we recommend you check the
    "Notify me of replies" box to receive e-mail notifications when there are
    any updates in your thread. When responding to posts via your newsreader,
    please "Reply to Group" so that others may learn and benefit from your
    issue.

    Microsoft engineers can only focus on one issue per thread. Although we
    provide other information for your reference, we recommend you post
    different incidents in different threads to keep the thread clean. In doing
    so, it will ensure your issues are resolved in a timely manner.

    For urgent issues, you may want to contact Microsoft CSS directly. Please
    check http://support.microsoft.com for regional support phone numbers.

    Any input or comments in this thread are highly appreciated.

    =====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    --------------------
    | From: "Grant Morgan" <>
    | Subject: Companyweb after SP1 - Web Part Error
    | Date: Tue, 7 Mar 2006 08:04:15 +1100
    | | Newsgroups: microsoft.public.windows.server.sbs
    | |
    | Hi
    |
    | After applying SBS2003 SP1 (Premium) everything is great, except the
    | companyweb website.
    |
    | On each web part on every page, the following message is displayed:
    | "Web Part Error: This page has encountered a critical error. Contact your
    | system administrator if this problem persists"
    |
    | I have checked the event log, and found the following message:
    | Event Type: Error
    | Event Source: Windows SharePoint Services 2.0
    | Event Category: (1)
    | Event ID: 1000
    | Description:
    | The safe mode service of Windows SharePoint Services has failed to
    | initialize because of an unknown error.
    |
    |
    | I have tried doing a repair on Sharepoint Services, but there is no
    change.
    |
    | Does anyone know what could be causing this...
    |
    | Cheers
    | Grant
    |
    |
    |
     
    Crina Li, Mar 7, 2006
    #2
    1. Advertisements

  3. Grant Morgan

    Grant Morgan Guest

    Hi Crina

    This fixed the problem instantly - thank you very much

    Cheers
    Grant
     
    Grant Morgan, Mar 7, 2006
    #3
  4. Grant Morgan

    Crina Li Guest

    Hi Grant,

    Thanks for your update.

    I am glad to hear the problem is resolved.

    It is my pleasure to work with you in this post. If you encounter any
    difficulties in the future, please submit the post to the newsgroup. We
    are glad to be of the assistance.

    Again, thank you for using Microsoft newsgroup. Have a nice day. :)

    Best regards,

    Crina Li (MSFT)

    Microsoft CSS Online Newsgroup Support

    Get Secure! - www.microsoft.com/security

    =====================================================
    This newsgroup only focuses on SBS technical issues. If you have issues
    regarding other Microsoft products, you'd better post in the corresponding
    newsgroups so that they can be resolved in an efficient and timely manner.
    You can locate the newsgroup here:
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

    When opening a new thread via the web interface, we recommend you check the
    "Notify me of replies" box to receive e-mail notifications when there are
    any updates in your thread. When responding to posts via your newsreader,
    please "Reply to Group" so that others may learn and benefit from your
    issue.

    Microsoft engineers can only focus on one issue per thread. Although we
    provide other information for your reference, we recommend you post
    different incidents in different threads to keep the thread clean. In doing
    so, it will ensure your issues are resolved in a timely manner.

    For urgent issues, you may want to contact Microsoft CSS directly. Please
    check http://support.microsoft.com for regional support phone numbers.

    Any input or comments in this thread are highly appreciated.

    =====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    --------------------
    | From: "Grant Morgan" <>
    | References: <#>
    <>
    | Subject: Re: Companyweb after SP1 - Web Part Error
    | Date: Tue, 7 Mar 2006 18:47:51 +1100
    | Lines: 154
    | X-Priority: 3
    | X-MSMail-Priority: Normal
    | X-Newsreader: Microsoft Outlook Express 6.00.2900.2180
    | X-RFC2646: Format=Flowed; Original
    | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
    | Message-ID: <>
    | Newsgroups: microsoft.public.windows.server.sbs
    | NNTP-Posting-Host: cpe-61-9-196-210.nsw.bigpond.net.au 61.9.196.210
    | Path: TK2MSFTNGXA03.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP12.phx.gbl
    | Xref: TK2MSFTNGXA03.phx.gbl microsoft.public.windows.server.sbs:250068
    | X-Tomcat-NG: microsoft.public.windows.server.sbs
    |
    | Hi Crina
    |
    | This fixed the problem instantly - thank you very much
    |
    | Cheers
    | Grant
    |
    | | > Hi Grant,
    | >
    | > Thank you for posting in SBS newsgroup.
    | >
    | > From the description, I understand the issue to be: you receive error
    | > message when you access companyweb after install SBS 2003 SP1. If I have
    | > misunderstood your concerns, please do not hesitate to let me know.
    | >
    | > AS I know, you may have the issue once installing .Net Framework 2.0.
    You
    | > may have to change the .Net Framework back to 1.1.4322 on the site or
    | > virtual directories. Please do as following:
    | >
    | > 1. Open the IIS management snap-in.
    | > 2. Go to the properties of companyweb.
    | > 3. Go to the ASP.NET tab.
    | > 4. On the ASP.NET version select the drop-down and change from the
    | > 2.0.50727 to 1.1.4322.
    | > 5. Apply and close out the properties.
    | > 6. Browse companyweb.
    | >
    | > If you want to run companyweb on ASP.NET 2.0.50727 you will need to
    | > upgrade
    | > run the following sharepoint command:
    | >
    | > stsadm.exe -o upgrade -forceupgrade -url http://companyweb
    | >
    | > See 894903 for more information.
    | >
    | > 894903 You receive a "The Windows SharePoint Services virtual server
    has
    | > not
    | > http://support.microsoft.com/?id=894903
    | >
    | > If running this command does not fix the issue, then you will need to
    | > confirm that your WSS is actually at SP2.
    | >
    | > 1. Start SharePoint Central Administration.
    | > 2. Under "Virtual Server Configuration" on the Windows SharePoint
    Services
    | > Central Administration page, click "Configure virtual server settings".
    | > 3. Under "Version" on the Virtual Server List page, note the version
    | > number
    | > that is listed for the virtual server, and then use one of the
    following
    | > methods, depending on your situation:
    | >
    | > The version numbers are listed as follows:
    | >
    | > 6.0.2.5530 is the version number of the virtual server in the
    | > original release version of Windows SharePoint Services.
    | >
    | > 6.0.2.6361 is the version number of the virtual server in Windows
    | > SharePoint Services Service Pack 1 (SP1).
    | >
    | > 6.0.2.6411 is the version number of the virtual server in Windows
    | > SharePoint Services that has the security update installed that is
    | > described in the following article in the Microsoft Knowledge Base:
    | >
    | > 887981 MS05-006: Vulnerability in Windows SharePoint Services and
    | > SharePoint Team Services could allow cross-site scripting and spoofing
    | > attacks
    | > http://support.microsoft.com/default.aspx?scid=kb;EN-US;887981
    | >
    | > 6.0.2.6568 is the version number of the virtual server in Windows
    | > SharePoint Services Service Pack 2 (SP2).
    | >
    | > If the version number is less than 6.0.2.6568, the virtual server is not
    | > at SP2. Please go to Microsoft site and download the WSS SP2. After
    | > installing it you will be able to access companyweb.
    | >
    | > I appreciate your time and look forward to hearing from you.
    | >
    | > Best regards,
    | >
    | > Crina Li (MSFT)
    | >
    | > Microsoft CSS Online Newsgroup Support
    | >
    | > Get Secure! - www.microsoft.com/security
    | >
    | > =====================================================
    | > This newsgroup only focuses on SBS technical issues. If you have issues
    | > regarding other Microsoft products, you'd better post in the
    corresponding
    | > newsgroups so that they can be resolved in an efficient and timely
    manner.
    | > You can locate the newsgroup here:
    | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
    | >
    | > When opening a new thread via the web interface, we recommend you check
    | > the
    | > "Notify me of replies" box to receive e-mail notifications when there
    are
    | > any updates in your thread. When responding to posts via your
    newsreader,
    | > please "Reply to Group" so that others may learn and benefit from your
    | > issue.
    | >
    | > Microsoft engineers can only focus on one issue per thread. Although we
    | > provide other information for your reference, we recommend you post
    | > different incidents in different threads to keep the thread clean. In
    | > doing
    | > so, it will ensure your issues are resolved in a timely manner.
    | >
    | > For urgent issues, you may want to contact Microsoft CSS directly.
    Please
    | > check http://support.microsoft.com for regional support phone numbers.
    | >
    | > Any input or comments in this thread are highly appreciated.
    | >
    | > =====================================================
    | >
    | > This posting is provided "AS IS" with no warranties, and confers no
    | > rights.
    | > --------------------
    | > | From: "Grant Morgan" <>
    | > | Subject: Companyweb after SP1 - Web Part Error
    | > | Date: Tue, 7 Mar 2006 08:04:15 +1100
    | > | | Newsgroups: microsoft.public.windows.server.sbs
    | > | |
    | > | Hi
    | > |
    | > | After applying SBS2003 SP1 (Premium) everything is great, except the
    | > | companyweb website.
    | > |
    | > | On each web part on every page, the following message is displayed:
    | > | "Web Part Error: This page has encountered a critical error. Contact
    | > your
    | > | system administrator if this problem persists"
    | > |
    | > | I have checked the event log, and found the following message:
    | > | Event Type: Error
    | > | Event Source: Windows SharePoint Services 2.0
    | > | Event Category: (1)
    | > | Event ID: 1000
    | > | Description:
    | > | The safe mode service of Windows SharePoint Services has failed to
    | > | initialize because of an unknown error.
    | > |
    | > |
    | > | I have tried doing a repair on Sharepoint Services, but there is no
    | > change.
    | > |
    | > | Does anyone know what could be causing this...
    | > |
    | > | Cheers
    | > | Grant
    | > |
    | > |
    | > |
    | >
    |
    |
    |
     
    Crina Li, Mar 7, 2006
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.