connecting to a handheld device using platform builder

Discussion in 'Windows Vista Drivers' started by srinivas, Dec 11, 2007.

  1. srinivas

    srinivas Guest


    I have a MIPSII device with a WinCE 5.0 image flashed made by using

    What I like to know is how do I connect to this device using platform
    builder. This device has two serial ports, couple of USB ones and a
    Network port.

    I gave an ip address and connected a back to back cable to my host pc
    which has platform builder hoping that it would send bootme packets to
    my pc containing platform builder. I couldnot see anything. FYI the ip
    addresses in the host and the device are under the same subnet.

    I want to debug my driver and application in the platform builder just
    like I would do with a cepc machine.

    Can any one suggest me regarding this. If its not possible with
    platform builder, then how it is done.

    Thanks in advance
    srinivas, Dec 11, 2007
    1. Advertisements

  2. srinivas

    Tim Roberts Guest

    I suggest you try microsoft.public.windowsce.platbuilder.
    It is certainly possible to debug a CE device over a network port, assuming
    the support has been compiled in to the image. The platbuilder group will
    be able to help you; this group is for Win32 and Win64 drivers.
    Tim Roberts, Dec 13, 2007
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.