CPU Usage 100% svchost.exe using up Mem usage

Discussion in 'Windows Update' started by mikenytola, May 28, 2007.

  1. mikenytola

    mikenytola Guest

    So far I have found that turning off the automatic updates is the
    cause of the problem. Is there any fix for this so that I can keep
    automatic updates on??? My computer had no problem with this before I
    did a fresh install of my OS three weeks ago. I just don't understand
    why my computer worked just fine before doing a FRESH install???


    - mike
     
    mikenytola, May 28, 2007
    #1
    1. Advertisements

  2. Before doing the items below, ensure that you have disabled all 3rd-party
    anti-virus, anti-spyware, popup-blocker, download accelerator, or firewall.
    If you disabled a 3rd-party firewall, then re-enable Windows Firewall for
    the duration.

    For a fix to the above problem, please do BOTH of the following:

    1. (not for Vista) If your update history shows that you do not yet have
    update KB927891 installed, then download and install update KB927891 ver3:
    <http://support.microsoft.com/kb/927891>
    and then restart Windows.

    2. For 32-bit systems, download and save to hard disk, and then install:
    <http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x86.exe>

    If this produces an error message about "Update agent already
    installed", then execute the installer again manually, with parameter
    /wuforce as in (at a comand prompt window):

    WindowsUpdateAgent30-x86.exe /wuforce

    Then visit Microsoft Update again, and report back whether your problem is
    fixed.
     
    Robin Walker [MVP], May 28, 2007
    #2
    1. Advertisements

  3. 1) Reboot and logon as a user with Administrative Privs...
    2) Immediately run the following batch script (You will have to create it by
    cutting/pasting as directed.)

    - Click Start, Run, type: notepad C:\register.bat and press Enter. Choose
    Yes when you are prompted.
    - Copy the following commands and then paste them into the opened Notepad
    window:

    regsvr32 comcat.dll /s
    regsvr32 shdoc401.dll /s
    regsvr32 shdoc401.dll /i /s
    regsvr32 asctrls.ocx /s
    regsvr32 oleaut32.dll /s
    regsvr32 shdocvw.dll /I /s
    regsvr32 shdocvw.dll /s
    regsvr32 browseui.dll /s
    regsvr32 browseui.dll /I /s
    regsvr32 msrating.dll /s
    regsvr32 mlang.dll /s
    regsvr32 hlink.dll /s
    regsvr32 mshtmled.dll /s
    regsvr32 urlmon.dll /s
    regsvr32 plugin.ocx /s
    regsvr32 sendmail.dll /s
    regsvr32 scrobj.dll /s
    regsvr32 mmefxe.ocx /s
    regsvr32 corpol.dll /s
    regsvr32 jscript.dll /s
    regsvr32 msxml.dll /s
    regsvr32 imgutil.dll /s
    regsvr32 thumbvw.dll /s
    regsvr32 cryptext.dll /s
    regsvr32 rsabase.dll /s
    regsvr32 inseng.dll /s
    regsvr32 iesetup.dll /i /s
    regsvr32 cryptdlg.dll /s
    regsvr32 actxprxy.dll /s
    regsvr32 dispex.dll /s
    regsvr32 occache.dll /s
    regsvr32 occache.dll /i /s
    regsvr32 iepeers.dll /s
    regsvr32 urlmon.dll /i /s
    regsvr32 cdfview.dll /s
    regsvr32 webcheck.dll /s
    regsvr32 mobsync.dll /s
    regsvr32 pngfilt.dll /s
    regsvr32 licmgr10.dll /s
    regsvr32 icmfilter.dll /s
    regsvr32 hhctrl.ocx /s
    regsvr32 inetcfg.dll /s
    regsvr32 tdc.ocx /s
    regsvr32 MSR2C.DLL /s
    regsvr32 msident.dll /s
    regsvr32 msieftp.dll /s
    regsvr32 xmsconf.ocx /s
    regsvr32 ils.dll /s
    regsvr32 msoeacct.dll /s
    regsvr32 inetcomm.dll /s
    regsvr32 msdxm.ocx /s
    regsvr32 dxmasf.dll /s
    regsvr32 l3codecx.ax /s
    regsvr32 acelpdec.ax /s
    regsvr32 mpg4ds32.ax /s
    regsvr32 voxmsdec.ax /s
    regsvr32 danim.dll /s
    regsvr32 Daxctle.ocx /s
    regsvr32 lmrt.dll /s
    regsvr32 datime.dll /s
    regsvr32 dxtrans.dll /s
    regsvr32 dxtmsft.dll /s
    regsvr32 WEBPOST.DLL /s
    regsvr32 WPWIZDLL.DLL /s
    regsvr32 POSTWPP.DLL /s
    regsvr32 CRSWPP.DLL /s
    regsvr32 FTPWPP.DLL /s
    regsvr32 FPWPP.DLL /s
    regsvr32 WUAPI.DLL /s
    regsvr32 WUAUENG.DLL /s
    regsvr32 ATL.DLL /s
    regsvr32 WUCLTUI.DLL /s
    regsvr32 WUPS.DLL /s
    regsvr32 WUWEB.DLL /s
    regsvr32 wshom.ocx /s
    regsvr32 wshext.dll /s
    regsvr32 vbscript.dll /s
    regsvr32 scrrun.dll mstinit.exe /setup /s
    regsvr32 msnsspc.dll /SspcCreateSspiReg /s
    regsvr32 msapsspc.dll /SspcCreateSspiReg /s
    regsvr32 /s urlmon.dll
    regsvr32 /s mshtml.dll
    regsvr32 /s shdocvw.dll
    regsvr32 /s browseui.dll
    regsvr32 /s jscript.dll
    regsvr32 /s vbscript.dll
    regsvr32 /s scrrun.dll
    regsvr32 /s msxml.dll
    regsvr32 /s actxprxy.dll
    regsvr32 /s softpub.dll
    regsvr32 /s wintrust.dll
    regsvr32 /s dssenh.dll
    regsvr32 /s rsaenh.dll
    regsvr32 /s gpkcsp.dll
    regsvr32 /s sccbase.dll
    regsvr32 /s slbcsp.dll
    regsvr32 /s cryptdlg.dll
    regsvr32 /s schannel.dll
    regsvr32 /s oleaut32.dll
    regsvr32 /s ole32.dll
    regsvr32 /s shell32.dll
    regsvr32 /s initpki.dll
    regsvr32 /s msscript.ocx
    regsvr32 /s dispex.dll
    regsvr32 jscript.dll /s
    del %temp% /Q /F
    net stop wuauserv
    ren %windir%\system32\catroot2 catroot2.old
    cd /d %windir%\SoftwareDistribution
    rd /s DataStore /Q
    regsvr32 wuapi.dll /s
    regsvr32 wups.dll /s
    regsvr32 wuaueng.dll /s
    regsvr32 wucltui.dll /s
    regsvr32 wuweb.dll /s
    regsvr32 msxml.dll /s
    regsvr32 msxml2.dll /s
    regsvr32 msxml3.dll /s
    regsvr32 urlmon.dll /s
    net start wuauserv
    exit

    - After you paste the above commands, please close the Notepad window.
    Choose Yes when you are prompted to save the file.
    - Click Start, Run, type:
    C:\register.bat and press Enter to run the commands I have pasted.
    The Process may take sometime.

    3) Download/Install Windows Update v3.
    http://go.microsoft.com/fwlink/?LinkID=91237

    4) Download/Install the 927891 patch.
    http://www.microsoft.com/downloads/details.aspx?FamilyId=7A81B0CD-A0B9-497E-8A89-404327772E5A

    5) Reboot.
     
    Shenan Stanley, May 28, 2007
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.