DHCP wont start error 1004, 1008, 1014

Discussion in 'Windows Small Business Server' started by computerbiz, Feb 9, 2005.

  1. computerbiz

    computerbiz Guest

    Server crashed today. Not sure why. Users say power fluctuated. Battery
    Backup in great shape. HUM! Anyway, event viewer shows DHCPServer errors
    1004, 1008 and 1014. I looked at the posts with these errors and not sure
    how to proceed. DHCP in Administrative tools says "not connected." Tried
    CEICW and get message, "The wizzard cannot set the DHCP scope options. Ensure
    that the DHCP server service is running and that the scope is defined.
    Alternatively, disable DHCP service manually and the configure your client
    computers manually, etc, etc.
    Using two NIC Configuration.

    ipconfig /all

    Host Name . . . . . . . . . . . . : peserver
    Primary Dns Suffix . . . . . . . : rlelaw.local
    Node Type . . . . . . . . . . . . : Unknown
    IP Routing Enabled. . . . . . . . : Yes
    WINS Proxy Enabled. . . . . . . . : Yes
    DNS Suffix Search List. . . . . . : rlelaw.local

    Ethernet adapter Server Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Connection
    Physical Address. . . . . . . . . : 00-11-43-04-CC-A3
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.16.2
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    DNS Servers . . . . . . . . . . . : 192.168.16.2
    Primary WINS Server . . . . . . . : 192.168.16.2

    Ethernet adapter Network Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet
    Adapter(LN
    E100TX v4)
    Physical Address. . . . . . . . . : 00-0C-41-EF-3F-E5
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.16.3
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.16.1
    DNS Servers . . . . . . . . . . . : 192.168.16.2
    NetBIOS over Tcpip. . . . . . . . : Disabled

    Thanks, David
     
    computerbiz, Feb 9, 2005
    #1
    1. Advertisements

  2. Merv Porter [SBS-MVP], Feb 9, 2005
    #2
    1. Advertisements

  3. computerbiz

    computerbiz Guest

    Thanks Merv.
    I made the changes you suggested but DHCP server will still not connect.
    Two services do not start when SBS 2003 starts;
    1. BrSpl Service
    2. Dhcp Service
    Thanks, David


     
    computerbiz, Feb 9, 2005
    #3
  4. It looks like you might have a router in the mix here. Try turning off its
    DHCP service (if it's turned on). I suspect the the BRSpl is the Brother
    print spooler service. I normally leave this turned this off.

    Any errors in the event logs (especially regarding the DHCP service)?

    Can you post an ipconfig /all for the server again now that you've made some
    changes.

    --
    Merv Porter [SBS MVP]
    ===================================

     
    Merv Porter [SBS-MVP], Feb 9, 2005
    #4
  5. computerbiz

    computerbiz Guest

    Hi Merv,
    Thanks for the late night response. I thought I was a night owl. Every
    time the server starts DHCP service does not start. If I try to start it
    manually in services it wont. Events show not connected, 1004, 1014. There
    is a router but it has DHCP turned off. I checked it several times. Currect
    setup worked for six weeks till crash yesterday. Would a Linksys WAP54G
    cause this problem?

     
    computerbiz, Feb 9, 2005
    #5
  6. Yes, if the WAP54G has the ability to act as a DHCP server and that
    capability is turned on. SBS will see the other DHCP server (whatever
    device it is) and immediately turn off it's own service in favor of the
    other device. So, if the SBS service starts momentarily and then shuts
    down, it's probably seeing another DHCP server somewhere.

    --
    Merv Porter [SBS MVP]
    ===================================
     
    Merv Porter [SBS-MVP], Feb 9, 2005
    #6
  7. computerbiz

    computerbiz Guest

    Hi Merv,
    Your were correct the DHCP Server was on in the Wireless Access Point.
    I removed it from the network. I can manually start the Service, but it
    won't automatically start on a reboot. any ideas.
    David

     
    computerbiz, Feb 11, 2005
    #7
  8. You might try re-running CEICW and then reboot.

    --
    Merv Porter [SBS MVP]
    ===================================
     
    Merv Porter [SBS-MVP], Feb 11, 2005
    #8
  9. computerbiz

    computerbiz Guest

    I ran CEICW and DHCP did not start automatically. It took two tries to start
    manually and it started on the second try.
    Here is IPCONFIG /all
    Microsoft Windows [Version 5.2.3790]
    (C) Copyright 1985-2003 Microsoft Corp.

    C:\Documents and Settings\Administrator>ipconfig /all

    Windows IP Configuration

    Host Name . . . . . . . . . . . . : peserver
    Primary Dns Suffix . . . . . . . : rlelaw.local
    Node Type . . . . . . . . . . . . : Unknown
    IP Routing Enabled. . . . . . . . : Yes
    WINS Proxy Enabled. . . . . . . . : Yes
    DNS Suffix Search List. . . . . . : rlelaw.local

    Ethernet adapter Server Local Area Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Server Connection
    Physical Address. . . . . . . . . : 00-11-43-04-CC-A3
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.16.2
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    DNS Servers . . . . . . . . . . . : 192.168.16.2
    Primary WINS Server . . . . . . . : 192.168.16.2

    Ethernet adapter Internet Connection:

    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet
    Adapter(LN
    E100TX v4)
    Physical Address. . . . . . . . . : 00-0C-41-EF-3F-E5
    DHCP Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.1.3
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 192.168.16.2
    NetBIOS over Tcpip. . . . . . . . : Disabled

    Thanks, David

     
    computerbiz, Feb 11, 2005
    #9
  10. Waht happens if you manually start the DHCP Server service and then reboot.
    Does it start up automatically.

    Any errors in the event logs?

    --
    Merv Porter [SBS MVP]
    ===================================
     
    Merv Porter [SBS-MVP], Feb 11, 2005
    #10
  11. computerbiz

    computerbiz Guest

    I rebooted again just to make sure. Won's start automatically. Took three
    clicks on "start the service" this time. DHCP - is - assigning address to
    clients. After clicking on the "start the service" I went to DHCP in
    Administrative tool. DHCP said not connected. When I clicked on the server
    the menu expands and the scope says active and Pool and Leases look OK.
    David

     
    computerbiz, Feb 11, 2005
    #11
  12. Not sure what to tell you David. Maybe someone else can jump in here.

    Are you getting any errors in the event logs (especially when you try to
    manually start DHCP)?

    --
    Merv Porter [SBS MVP]
    ===================================

     
    Merv Porter [SBS-MVP], Feb 11, 2005
    #12
  13. computerbiz

    computerbiz Guest

    Here is an error that has the right time for the manual restart of DHCP. It
    started on the first try this time, although i spent a couple of minutes
    looking elsewhere before starting manually.

    tcpsvcs (5404) Unable to read the header of logfile
    C:\WINDOWS\System32\dhcp\j50.log. Error -501.

    Faulting application BRSVC01A.EXE, version 1.0.0.4, faulting module unknown,
    version 0.0.0.0, fault address 0x00000000

    50070: Unable to connect to the database STS_Config on PESERVER\SharePoint.
    Check the database connection information and make sure that the database
    server is running.

    David

     
    computerbiz, Feb 11, 2005
    #13
  14. computerbiz

    computerbiz Guest

    Merv,
    Thanks for your help. Nice to know your there to help us rookies ot of the
    jambs we put ourselfs into. It is a bummer when you stump the experts.
    Thanks
    David


     
    computerbiz, Feb 11, 2005
    #14
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.