[DTM] Any solution for DRM fail?

Discussion in 'Windows Vista Drivers' started by Winston, Sep 4, 2007.

  1. Winston

    Winston Guest

    On Vista platform, my driver failed the DRM test [DTM].
    ( My driver can pass DRM test [DTM] on XP platform!)

    The fail condition is "ks.sys could not be detected in the list of
    expected failed drivers"!!
    expected drivers.
    I have searched for the solution for a very long time.

    Does any one can give me some clues?

    Thanks for your help

    Best Regards

    Winston


    Following is the logging information of DRM test ..............
    =======================================================

    Title Result
    Investigate
    Investigate
    Failed
    Start Test 4/11/2007 10:24:15.110 AM Miniport\Authentication\Find all
    drivers
    Message 4/11/2007 10:24:15.110 AM Device Name = Sound Card
    Message 4/11/2007 10:24:15.110 AM PnP ID = USB
    \VID_1852&PID_7022&REV_0001&MI_01
    Message 4/11/2007 10:24:15.110 AM Successfully instantiated Render
    pin
    Message 4/11/2007 10:24:15.110 AM Successfully instantiated Render
    Pin. Handle = 0x00000584
    Message 4/11/2007 10:24:15.110 AM ====> DRMKOpen
    Message 4/11/2007 10:24:15.110 AM ---------> DRM_OK(0x00000000) : DRM
    Handle 0x019FCEA8 : (API took 15 ms)
    Message 4/11/2007 10:24:15.110 AM ====> DRMKCreateStream(0x019FCEA8,
    KsPinHandle=0x00000584, IPropertyStore=0x0357B9C4,
    ScmsCopyrighted=FALSE, ScmsOriginal=FALSE,
    DigitalOutputDisable=FALSE)
    Message 4/11/2007 10:24:15.110 AM ---------> DRM_OK(0x00000000) :
    StreamId = 0x00000007 : Stream Handle = 0x019FD8D8 : (API took 16
    ms)
    Message 4/11/2007 10:24:15.110 AM ====> DRMKAuthenticate(0x019FD8D8,
    CheckCat=TRUE, MinDrmLevel=100000, RequireCerts=TRUE, CheckImage=TRUE,
    AllowTestCert=FALSE
    Message 4/11/2007 10:24:15.110 AM --------->
    DRM_BADDRIVER(0x80000072) : (API took 203 ms)
    Message 4/11/2007 10:24:15.110 AM C:\Windows\system32\drivers\drmk.sys
    - AuthInadequateDRMLevel(0x00000002)
    Message 4/11/2007 10:24:15.110 AM C:\Windows\system32\drivers
    \Tenor2ch.sys - AuthNoCert(0x00000001)
    Message 4/11/2007 10:24:15.110 AM C:\Windows\system32\drivers
    \portcls.sys - AuthInadequateDRMLevel(0x00000002)
    Message 4/11/2007 10:24:15.110 AM Authentication failed
    Message 4/11/2007 10:24:15.110 AM ====>
    DRMKDestroyStream(0x019FD8D8)
    Message 4/11/2007 10:24:15.110 AM ---------> DRM_OK(0x00000000) : (API
    took 0 ms)
    Message 4/11/2007 10:24:15.110 AM ====> DRMKClose(0x019FCEA8)
    Message 4/11/2007 10:24:15.110 AM ---------> DRM_OK(0x00000000) : (API
    took 15 ms)
    Message 4/11/2007 10:24:15.110 AM Setting render pin to state
    KSSTATE_STOP
    Message 4/11/2007 10:24:15.110 AM authParam.NumFailures = 3, expected
    at least 4
    Message 4/11/2007 10:24:15.110 AM Failure condition: ks.sys could not
    be detected in the list of expected failed drivers
    End Test 4/11/2007 10:24:15.110 AM Miniport\Authentication\Find all
    drivers
    Result: Fail
    Repro: C:\WTT\JobsWorkingDir\Tasks\WTTJobRun9ACFD3B7-407F-47B1-
    BA9B-9985A2D8BD9A\drmtest.exe
     
    Winston, Sep 4, 2007
    #1
    1. Advertisements

  2. Winston

    Guest

    Hi Winston, I know it was a long time ago that you encountered this error, but I am seeing the same failure right now with my driver. Do you remember how you solved this? Thanks!
    -Ryan


     
    , Feb 5, 2013
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.