error 0x800713de: the quorum disk could not be located by the clus

Discussion in 'Clustering' started by DAPS, Jun 15, 2008.

  1. DAPS

    DAPS Guest

    Hi everybody,

    I have cluster ELLOGCL2 named with 2 nodes. Node 2 have cluster resources
    but node 1 cannot take control on cluster resources after change groups
    action.
    Then I evict node 2 from cluster and I tried to add node to the cluster, but
    I cannot:
    In step finding common resources on nodes -> checking cluster feasibility ->
    ellogcl2:checking that all nodes have access to the quorum resource. I have
    next error:

    "error 0x800713de: the quorum disk could not be located by the cluster
    service"

    How can I fix this error ? Must cluster service be recreated ?

    Thanks !
     
    DAPS, Jun 15, 2008
    #1
    1. Advertisements

  2. DAPS

    Tim Walsh Guest

    Where's the quorum disk physically located? A SAN, NAS or some other shared
    media?
     
    Tim Walsh, Jun 15, 2008
    #2
    1. Advertisements

  3. DAPS

    DAPS Guest

    Fibre Channel SAN (Emulex).

     
    DAPS, Jun 15, 2008
    #3
  4. John Toner [MVP], Jun 16, 2008
    #4
  5. hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx




    Tim Walsh wrote:

    Where's the quorum disk physically located?
    15-Jun-08

    Where is the quorum disk physically located? A SAN, NAS or some other shared
    media?

    Previous Posts In This Thread:

    error 0x800713de: the quorum disk could not be located by the clus
    Hi everybody,

    I have cluster ELLOGCL2 named with 2 nodes. Node 2 have cluster resources
    but node 1 cannot take control on cluster resources after change groups
    action.
    Then I evict node 2 from cluster and I tried to add node to the cluster, but
    I cannot:
    In step finding common resources on nodes -> checking cluster feasibility ->
    ellogcl2:checking that all nodes have access to the quorum resource. I have
    next error:

    "error 0x800713de: the quorum disk could not be located by the cluster
    service"

    How can I fix this error ? Must cluster service be recreated ?

    Thanks !

    Where's the quorum disk physically located?
    Where is the quorum disk physically located? A SAN, NAS or some other shared
    media?

    Re: error 0x800713de: the quorum disk could not be located by the
    Fibre Channel SAN (Emulex).

    :

    You should be able to add the node using the "Advanced (minimum)"configuration
    You should be able to add the node using the "Advanced (minimum)"
    configuration option during the add node wizard. See the following KB for
    more details:

    http://support.microsoft.com/kb/331801

    Regards,
    John

    Visit my blog: http://msmvps.com/blogs/jtoner

    shared
    resources
    groups
    cluster,


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    SQL Server: UDF IsValidNumber
    http://www.eggheadcafe.com/tutorial...9a-54e941c6b023/sql-server-udf-isvalidnu.aspx
     
    hamid sherkat masoum, Jan 11, 2010
    #5
  6. hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx




    Tim Walsh wrote:

    Where's the quorum disk physically located?
    15-Jun-08

    Where is the quorum disk physically located? A SAN, NAS or some other share
    media?

    Previous Posts In This Thread:

    error 0x800713de: the quorum disk could not be located by the clus
    Hi everybody

    I have cluster ELLOGCL2 named with 2 nodes. Node 2 have cluster resources
    but node 1 cannot take control on cluster resources after change groups
    action.
    Then I evict node 2 from cluster and I tried to add node to the cluster, but
    I cannot
    In step finding common resources on nodes -> checking cluster feasibility ->
    ellogcl2:checking that all nodes have access to the quorum resource. I have
    next error

    "error 0x800713de: the quorum disk could not be located by the cluster
    service

    How can I fix this error ? Must cluster service be recreated

    Thanks !

    Where's the quorum disk physically located?
    Where is the quorum disk physically located? A SAN, NAS or some other share
    media?

    Re: error 0x800713de: the quorum disk could not be located by the
    Fibre Channel SAN (Emulex)

    :

    You should be able to add the node using the "Advanced (minimum)"configuration
    You should be able to add the node using the "Advanced (minimum)
    configuration option during the add node wizard. See the following KB fo
    more details

    http://support.microsoft.com/kb/33180

    Regards
    Joh

    Visit my blog: http://msmvps.com/blogs/jtone

    share
    resource
    group
    cluster,

    881021 - the same problem
    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    Use OWC to Stream Excel to the Browser
    http://www.eggheadcafe.com/tutorial...b-607bab0e0647/use-owc-to-stream-excel-t.aspx
     
    hamid sherkat masoum, Jan 11, 2010
    #6
  7. hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx




    Tim Walsh wrote:

    Where's the quorum disk physically located?
    15-Jun-08

    Where is the quorum disk physically located? A SAN, NAS or some other share
    media?

    Previous Posts In This Thread:

    error 0x800713de: the quorum disk could not be located by the clus
    Hi everybody

    I have cluster ELLOGCL2 named with 2 nodes. Node 2 have cluster resources
    but node 1 cannot take control on cluster resources after change groups
    action.
    Then I evict node 2 from cluster and I tried to add node to the cluster, but
    I cannot
    In step finding common resources on nodes -> checking cluster feasibility ->
    ellogcl2:checking that all nodes have access to the quorum resource. I have
    next error

    "error 0x800713de: the quorum disk could not be located by the cluster
    service

    How can I fix this error ? Must cluster service be recreated

    Thanks !

    Where's the quorum disk physically located?
    Where is the quorum disk physically located? A SAN, NAS or some other share
    media?

    Re: error 0x800713de: the quorum disk could not be located by the
    Fibre Channel SAN (Emulex)

    :

    You should be able to add the node using the "Advanced (minimum)"configuration
    You should be able to add the node using the "Advanced (minimum)
    configuration option during the add node wizard. See the following KB fo
    more details

    http://support.microsoft.com/kb/33180

    Regards
    Joh

    Visit my blog: http://msmvps.com/blogs/jtone

    share
    resource
    group
    cluster,

    881021 - the same problem
    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx

    881021 - the same problem
    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    Database Scale-Out Strategies for Web Apps
    http://www.eggheadcafe.com/tutorial...95-c0f6ed092c90/database-scaleout-strate.aspx
     
    hamid sherkat masoum, Jan 11, 2010
    #7
  8. hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx




    Tim Walsh wrote:

    Where's the quorum disk physically located?
    15-Jun-08

    Where is the quorum disk physically located? A SAN, NAS or some other shared
    media?

    Previous Posts In This Thread:

    error 0x800713de: the quorum disk could not be located by the clus
    Hi everybody,

    I have cluster ELLOGCL2 named with 2 nodes. Node 2 have cluster resources
    but node 1 cannot take control on cluster resources after change groups
    action.
    Then I evict node 2 from cluster and I tried to add node to the cluster, but
    I cannot:
    In step finding common resources on nodes -> checking cluster feasibility ->
    ellogcl2:checking that all nodes have access to the quorum resource. I have
    next error:

    "error 0x800713de: the quorum disk could not be located by the cluster
    service"

    How can I fix this error ? Must cluster service be recreated ?

    Thanks !

    Where's the quorum disk physically located?
    Where is the quorum disk physically located? A SAN, NAS or some other shared
    media?

    Re: error 0x800713de: the quorum disk could not be located by the
    Fibre Channel SAN (Emulex).

    :

    You should be able to add the node using the "Advanced (minimum)"configuration
    You should be able to add the node using the "Advanced (minimum)"
    configuration option during the add node wizard. See the following KB for
    more details:

    http://support.microsoft.com/kb/331801

    Regards,
    John

    Visit my blog: http://msmvps.com/blogs/jtoner

    shared
    resources
    groups
    cluster,

    881021 - the same problem
    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx

    881021 - the same problem
    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx

    881021 - the same problem
    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    Oracle DSNLess connection string sample
    http://www.eggheadcafe.com/tutorial...d-b5b96374bb0c/oracle-dsnless-connection.aspx
     
    hamid sherkat masoum, Jan 11, 2010
    #8
  9. for so much replies! it didn't say me that they're posting. i thought i'd to retry. :(
    i also tried minimum configuration, but it didn't help.




    hamid sherkat masoum wrote:

    881021 - the same problem
    11-Jan-10

    hi
    i've the same problem.
    i don't know how can i set the quorum disk.
    when i right click on the cluster root in Cluster Admin and get properties, in the Quorum page i see the following:

    - Quorum resource: Local Quorum
    - Partition: C:\WINDOWS\cluster
    - Root path: \MSCS\
    - Root quorum log at: 4096 KB

    what can i do now?
    thx

    Previous Posts In This Thread:


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    Using the WebResource.axd Handler with Embedded ASP.NET Resources
    http://www.eggheadcafe.com/tutorial...b6-f27c1f3beb34/using-the-webresourceaxd.aspx
     
    hamid sherkat masoum, Jan 11, 2010
    #9
  10. DAPS

    Chris Metos Guest

    Hi All !

    I have a same problem,

    FYI

    to deplace the quorum you must have a secondary hard drive formated in NTFS and basic type

    On cluster admin console add new ressource type disk, and select your new partition

    Now you can change the location of quorum




     
    Chris Metos, Mar 10, 2011
    #10
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.