Error 0xC00002E1

Discussion in 'Windows Server' started by Guest, Aug 6, 2005.

  1. Guest

    Guest Guest

    I have a server that has been running on an ADAPTEC 2120s Raid card
    The card is faulty -it overheats, data transfer fails and the server
    I am a fair way from a major centre so I decided to take the opportunity and
    change to a serial ATA raid

    I copied - ghosted - the drive to a serial ATA drive all seemed OK

    When I go to boot I get to the setting network connections then the error
    0xc00002E1 comes up the message says to boot into safe mode and do directory

    When I do that I get to the logon, enter my details it appears to do
    something but then the logon screen pops up

    I have to install the serial ATA as the box has to be back up so I'll do a
    fresh install, I have kept the original RAID untouched so if there is a
    solution I'll be able to redo the lot.

    Guest, Aug 6, 2005
    1. Advertisements

  2. You didn't talk about OS of your server.
    Anyway I suppose this link can to help you:
    Giuseppe Nacci, Aug 6, 2005
    1. Advertisements

  3. Guest

    Guest Guest

    I am using win2003 standard

    I resovled the problem

    I had ghosted the Hard Drive and rebooted the Server with the raid card
    still in place

    That meant that on its initial startup the HDD got drive G:

    When I removed the Raid Card the HDD went drive C:

    The drive name had changed
    I just redid the ghosting and shut down, removed the RAID card and booted up
    without error

    Thanks Giuseppe

    Guest, Aug 7, 2005
  4. You're welcome ;-)
    Giuseppe Nacci, Aug 7, 2005
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.