Error ID = 0xC00D11CD, Condition ID = 0x00000000

Discussion in 'Windows Media Player' started by secretreflections, Jun 5, 2004.

  1. Can someone tell me how to fix this error?
     
    secretreflections, Jun 5, 2004
    #1
    1. Advertisements

  2. WHAT CAN I DO TO DOWNLOAD MUSIC ON TO MY MP3?
     
    MIKETHEMILK.COM, Jun 5, 2004
    #2
    1. Advertisements

  3. C00D11CD is "Unknown Error". Generally it doesn't have a single solution or
    answer. To help us figure the real problem you it would be great if you
    could provide some more basic information about the problem. That being
    said please read on for some basic troubleshooting help for the error.

    If none of the information below helps you will need to provide us with *as
    much* information about the problem as you possibly can. - See
    http://tinyurl.com/2o4h9

    For a few common solutions to error C00D11CD, please see
    http://tinyurl.com/2wpw7

    Q: Are you playing an AVI?
    If so...You likely don't have the right codec installed for that specific
    AVI or you have a bad install of the codec.

    Using a DirectShow decoding filter such as FFDShow will decrease the
    problems you could run into with codec problems. FFDshow will decode XviD,
    DivX 3/4/5, 3IVX, and has support for many other codec's. It can be
    downloaded at http://tinyurl.com/2snnx. (Download ffdshow-20020617.exe and
    then run it's installer)

    If you have the correct codec installed and the video still doesnt play
    download GSpot and run your AVI though the program. If Gspot says "Failed
    to render", "Missing Chuck", etc. then your video file is corrupt.

    If you just wish to install the individual codec's for your specific video
    or FFDShow doesnt support the codec for you file please do the following.
    - Download and use GSpot (http://tinyurl.com/328cp)
    - Run the installer, open GSpot, goto File>>Open.
    - Look for the 4CC code for the file's Video Codec
    - http://tinyurl.com/262go will help you.
    (Or post the information back here and I can help)
    -If you don't get audio, what codec does it use? GSpot also tells you this.

    Q: Are you playing any type of content directly from a web link? (Streaming
    audio, video, radio, etc)
    If so...You must provide the exact link to what you are trying to access.
    The homepage isn't important, but an exact link to the content is.

    Q: Are you playing an MPEG/MPG file?
    If so...Please provide the following information in a reply to this post.
    -Does it only happen with a few MPEG/MPG files?
    -If so...It's most likely a file encoded with the MPEG-2 codec. To decode
    this you will need to install an MPEG-2 decoder. Follow the link to more
    information.
    http://www.nwlink.com/~zachd/pss/pss.html#mpeg2
    -If not...Can you provide a link or more information about the file?

    Q: Are you trying to burn a CD?
    If so...Please see http://tinyurl.com/32zkh. That being said the IMAPI
    burner that is included with WMP isn't very good. If the above link doesn't
    help goto http://tinyurl.com/u8p3 and, download the free Nero Fast Burn
    Plug-in. This plug-in will *not* burn DRM-enabled WMA's (Those downloaded
    from pay sites like Napster, MusicNow, etc.) If you are looking for better
    software for burning CD's try Roxio's Easy CD/DVD Creator or Nero Burning
    ROM.

    Easy Media Creator
    http://tinyurl.com/414r

    Nero Burning ROM
    http://tinyurl.com/3xt8a

    Q: I having problems playing and/or burning DRM-enabled WMA's. (Ex.
    Wal-Mart, Napster, MusicNow)
    If so...Your best bet is to ask either the support provided by the site you
    bought them from or contact Microsoft Support. No one who regularly posts
    in this newsgroup knows a great deal about troubleshooting DRM-enabled
    files.

    Microsoft Product Support
    http://tinyurl.com/29y9t

    Q: Are you having problems playing MIDI's?
    If So...Please see http://tinyurl.com/23vqj. That should cover most MIDI
    issues.

    Q: Are you trying to play a MOV, RM, RA file?
    If so...Please goto http://tinyurl.com/2sp39 and notice that those are not
    supported file type in WMP. You need to use RealPlayer or RealOne for RM,
    RA, Etc. And then use QuickTime for MOV.
     
    Chris Lanier [MVP], Jun 5, 2004
    #3
  4. You mean an "MP3 Player"?

    Support for most MP3 players is left to the specific company who makes the
    device. I personally do not own an MP3 player that I use with WMP.
    Drag-and-Drop via Windows Explorer is so much easier then using WMP to
    transfer files. Most USB players support the transfer of files via
    Drag-and-Drop.

    Due to most of the people who post on a regular basis in this newsgroup not
    using WMP to move files to a player, support isn't that great around here
    for it. Since the maker of the device writes the drivers most of the time,
    it is a good idea to ask them about any problems you run into.

    Supported players that "should" work within WMP can be seen at
    http://tinyurl.com/ytol6

    To order to play WMA's downloaded from pay service's (Wal-mart, Napster,
    etc) your player needs to be supported as a "Music Service Friendly"
    device. - http://tinyurl.com/35mpq

    Reinstalling the drivers is always the first thing you should try to fix any
    problems you run into. If you then run into the error "Interface not
    Registered", you will want to reinstall WMP over itself. For any other
    support it would be best to ask the manufacturer of the device about it.
    You may post here and there is nothing wrong with it, but the main
    contributories to the group can not exactly help you much.
     
    Chris Lanier [MVP], Jun 5, 2004
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.