error number 0x8024D007

Discussion in 'Windows Update' started by Darren, May 22, 2007.

  1. Darren

    Darren Guest

    can someone help? everytime i try to update windows i get error number
    0x8024D007. hope someone can help. thanks Darren.
     
    Darren, May 22, 2007
    #1
    1. Advertisements

  2. First, open the Services console by going to Start > Run > type in

    services.msc

    Click OK or press Enter
    Check to ensure that Automatic Updates is set to Automatic for
    'Startup type' by double clicking on it

    Check to ensure that Background Intelligent Transfer Service (BITS)is
    *NOT* set to Disabled for ' Startup type ' by double clicking on it
    It *can* be set to Manual and updates will install successfully

    IF BITS is set to Disabled, first test to see if it functions
    Click the Start button under ' Service status '
    IF BITS can not start up, then register these .dll files by going to
    Start > Run > type in [or copy & paste] these lines EXACTLY as posted,
    clicking OK or pressing Enter after *each one* -

    regsvr32 qmgr.dll
    regsvr32 qmgrprxy.dll

    If the above is not the issue, see if this resolves it :

    Go to Internet Options in the Control Panel.
    Click the Advanced tab.
    Scroll down to the Security heading.
    UNcheck the box next to " Check for server certificate revocation
    [requires restart] ".
    Also, put a check in the box next to " Do not save encrypted pages to
    disk ". Click Apply, OK, restart the system and revisit Windows Update
    to see if the issue is resolved.

    MowGreen [MVP 2003-2007]
    ===============
    *-343-* FDNY
    Never Forgotten
    ===============
     
    MowGreen [MVP], May 23, 2007
    #2
    1. Advertisements

  3. Darren

    ManfredP Guest

    Hello,

    I've done all these but it does not help. And now?

    gerretings

    Manfred
     
    ManfredP, Nov 1, 2007
    #3
  4. Jetzt guckst Du http://support.microsoft.com/kb/902322 und fragst in einer
    deutschsprachigen Newsgroup für Deine Windows-Version nach, falls es nicht
    hilft.

    Bye,
    Freudi
     
    Ottmar Freudenberger, Nov 1, 2007
    #4
  5. Darren

    Castawaycf Guest

    I did not see all of these replies until just now. I finally gave up and
    just did a reformat and can now update. I am not sure if any of these
    solutions would work for my problem, but thanks for the help.
     
    Castawaycf, Feb 24, 2008
    #5
  6. Darren

    Bruce Plate Guest

    I just struggled with this issue for hours. It ended up being an issue with the permissions on two registry keys.

    Both of these had read only rights...
    HKLM\SYSTEM\CurrentControlSet\Services\Bits
    HKLM\SYSTEM\CurrentControlSet\Services\wuauserv

    I used Regedit->Advanced->"Inherit from parent..." to reset the permissions.

    Finally, I used the Windows Agent Update from http://support.microsoft.com/kb/949104 .

    I hope this helps. Regards, Bruce






    Castawayc wrote:

    I did not see all of these replies until just now.
    23-Feb-08

    I did not see all of these replies until just now. I finally gave up and
    just did a reformat and can now update. I am not sure if any of these
    solutions would work for my problem, but thanks for the help

    :

    Previous Posts In This Thread:

    error number 0x8024D007
    can someone help? everytime i try to update windows i get error numbe
    0x8024D007. hope someone can help. thanks Darren.

    First, open the Services console by going to Start > Run > type inservices.
    First, open the Services console by going to Start > Run > type i

    services.ms

    Click OK or press Ente
    Check to ensure that Automatic Updates is set to Automatic fo
    'Startup type' by double clicking on i

    Check to ensure that Background Intelligent Transfer Service (BITS)i
    *NOT* set to Disabled for ' Startup type ' by double clicking on i
    It *can* be set to Manual and updates will install successfull

    IF BITS is set to Disabled, first test to see if it function
    Click the Start button under ' Service status
    IF BITS can not start up, then register these .dll files by going to
    Start > Run > type in [or copy & paste] these lines EXACTLY as posted,
    clicking OK or pressing Enter after *each one*

    regsvr32 qmgr.dl
    regsvr32 qmgrprxy.dl

    If the above is not the issue, see if this resolves it

    Go to Internet Options in the Control Panel
    Click the Advanced tab
    Scroll down to the Security heading
    UNcheck the box next to " Check for server certificate revocation
    [requires restart] "
    Also, put a check in the box next to " Do not save encrypted pages to
    disk ". Click Apply, OK, restart the system and revisit Windows Update
    to see if the issue is resolved

    MowGreen [MVP 2003-2007
    ==============
    *-343-* FDN
    Never Forgotte
    ==============


    Darren wrote:

    Re: error number 0x8024D007
    Hello


    I have done all these but it does not help. And now

    gerreting

    Manfred

    Re: error number 0x8024D007

    Jetzt guckst Du http://support.microsoft.com/kb/902322 und fragst in eine
    deutschsprachigen Newsgroup f?r Deine Windows-Version nach, falls es nich
    hilft

    Bye
    Freud
    --
    Macht euer Windows sicherer: http://windowsupdate.microsoft.com - jetzt
    http://www.microsoft.com/germany/sicherheit
    Infos zu aktuellen Patches f?r IE, OE und WinXP: http://patch-info.d
    Letzte Aktualisierung: IE - 23.10.07 / OE - 09.10.07 / WinXP - 23.10.07

    I did not see all of these replies until just now.
    I did not see all of these replies until just now. I finally gave up and
    just did a reformat and can now update. I am not sure if any of these
    solutions would work for my problem, but thanks for the help

    :


    Submitted via EggHeadCafe - Software Developer Portal of Choice
    BizTalk: Incorporating conditional If / Else Functoid Logic in a map.
    http://www.eggheadcafe.com/tutorial...0b-bba39e4bbcf0/biztalk-incorporating-co.aspx
     
    Bruce Plate, Apr 13, 2010
    #6
  7. Darren

    Peter Foldes Guest

    Good going Bruce. You posted to a 2year old thread like an deadhead from egghead
     
    Peter Foldes, Apr 13, 2010
    #7
  8. Darren

    John Guest

    It would help more if you could get into that DeLorean. Set the clock back
    to May 2007. Make sure you hit 88MPH.
     
    John, Apr 13, 2010
    #8
  9. Darren

    Myya Little Guest

    Bruce,

    U are a genius. It worked. Ive been trying to get this fixed for a months.
     
    Myya Little, Mar 11, 2011
    #9
  10. Darren

    JD Guest

    A reply to a post that is almost four years old. All snip. Bye.

    Original Reply Dated: May 22, 2007

    Submitted via EggHeadCafe
    For Beginners
     
    JD, Mar 12, 2011
    #10
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.