Error Source "NtFrs" Event ID "13555" and "13552"

Discussion in 'File Systems' started by TPSchaefer, Sep 30, 2004.

  1. TPSchaefer

    TPSchaefer Guest

    I am getting the following error and I can't figure out how to resolve.



    Error Source "NtFrs" Event ID "13555" and "13552"

    The File Replication Service is in an error state. Files will not replicate
    to or from one or all of the replica sets on this computer until the
    following recovery steps are performed:


    Recovery Steps:


    [1] The error state may clear itself if you stop and restart the FRS
    service. This can be done by performing the following in a command window:


    net stop ntfrs

    net start ntfrs


    If this fails to clear up the problem then proceed as follows.


    [2] For Active Directory Domain Controllers that DO NOT host any DFS
    alternates or other replica sets with replication enabled:


    If there is at least one other Domain Controller in this domain then restore
    the "system state" of this DC from backup (using ntbackup or other
    backup-restore utility) and make it non-authoritative.


    If there are NO other Domain Controllers in this domain then restore the
    "system state" of this DC from backup (using ntbackup or other
    backup-restore utility) and choose the Advanced option which marks the
    sysvols as primary.


    If there are other Domain Controllers in this domain but ALL of them have
    this event log message then restore one of them as primary (data files from
    primary will replicate everywhere) and the others as non-authoritative.



    [3] For Active Directory Domain Controllers that host DFS alternates or
    other replica sets with replication enabled:


    (3-a) If the Dfs alternates on this DC do not have any other replication
    partners then copy the data under that Dfs share to a safe location.

    (3-b) If this server is the only Active Directory Domain Controller for this
    domain then, before going to (3-c), make sure this server does not have any
    inbound or outbound connections to other servers that were formerly Domain
    Controllers for this domain but are now off the net (and will never be
    coming back online) or have been fresh installed without being demoted. To
    delete connections use the Sites and Services snapin and look for

    Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.

    (3-c) Restore the "system state" of this DC from backup (using ntbackup or
    other backup-restore utility) and make it non-authoritative.

    (3-d) Copy the data from step (3-a) above to the original location after the
    sysvol share is published.



    [4] For other Windows servers:


    (4-a) If any of the DFS alternates or other replica sets hosted by this
    server do not have any other replication partners then copy the data under
    its share or replica tree root to a safe location.

    (4-b) net stop ntfrs

    (4-c) rd /s /q c:\windows\ntfrs\jet

    (4-d) net start ntfrs

    (4-e) Copy the data from step (4-a) above to the original location after the
    service has initialized (5 minutes is a safe waiting time).


    Note: If this error message is in the eventlog of all the members of a
    particular replica set then perform steps (4-a) and (4-e) above on only one
    of the members.

    Error "13552"

    The File Replication Service is unable to add this computer to the following
    replica set:

    "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"


    This could be caused by a number of problems such as:

    -- an invalid root path,

    -- a missing directory,

    -- a missing disk volume,

    -- a file system on the volume that does not support NTFS 5.0


    The information below may help to resolve the problem:

    Computer DNS name is "computername.domain.com"

    Replica set member name is "computername"

    Replica set root path is "c:\windows\sysvol\domain"

    Replica staging directory path is "c:\windows\sysvol\staging\domain"

    Replica working directory path is "c:\windows\ntfrs\jet"

    Windows error status code is

    FRS error status code is FrsErrorMismatchedJournalId


    Other event log messages may also help determine the problem. Correct the
    problem and the service will attempt to restart replication automatically at
    a later time.

    For more information, see Help and Support Center at
     
    TPSchaefer, Sep 30, 2004
    #1
    1. Advertisements

  2. TPSchaefer

    user Guest

    if you disable referral to that DC then do the net stop ntfrs

    rd /s /q c:\windows\ntfrs\jet

    net start ntfrs
    this will fix the error but it will also place everything in ntfrs_pre
    existing and then bring it back, dont worry about that just let it do
    its job and after a fair amount of time you can compair the pree with
    the real and merge the leftover then re enable referral.
    cheers
     
    user, Sep 30, 2004
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.