Error When Generating System Health Report

Discussion in 'Windows Vista Performance' started by Dell Boy, Mar 5, 2007.

  1. Dell Boy

    Dell Boy Guest

    I'm setting up a brand new Dell Dimension which has a good spec, e.g. Intel
    E6600 processor, 2GB 666Mhz RAM, etc, and latest Windows updates. When I go
    to Control Panel – System And Maintenance - Performance Information And Tools
    – Advanced Tools – Generate A System Health Report I get the following error:

    "An error occurred while attempting to generate the report. The wait for the
    report generation tool to finish has timed out."

    Has anyone any ideas on this? The machine doesn't appear unhealthy (I've
    checked the Windows event Logs) but I would like to check it oput with a
    System Health Report if possible.
     
    Dell Boy, Mar 5, 2007
    #1
    1. Advertisements

  2. Hello Dell,

    Thank you for using newsgroup!

    From your post, I have performed research but I cannot find the similar
    error reported so far. Would you please send me a screen shot of the error
    message so that I can perform further research?

    To take a screen shot:
    ---------------------
    1. Press the Pr Scrn key once on the keyboard when the error message
    appears.
    2. Click Start, go to Run, enter MSPAINT in the open dialog box, and then
    Click OK.
    3. Use Ctrl + V to paste the screenshot to the canvas.
    4. From the File menu, go to Save and save it as a JPG file.
    5. Send the JPG file to me as an attachment.
    My mailbox:

    Please test the issue in Safe Mode to see if the issue still occurs in this
    mode.
    Start your computer in safe mode
    <http://windowshelp.microsoft.com/Windows/en-US/Help/323ef48f-7b93-4079-a48a
    -5c58eec904a11033.mspx>

    Thanks & Regards,

    Ken Zhao

    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security <http://www.microsoft.com/security>
    ====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    ====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.





    --------------------
    | Thread-Topic: Error When Generating System Health Report
    | thread-index: AcdfTerIRzdxlMW2SqibmVFqPSdn9Q==
    | X-WBNR-Posting-Host: 89.240.210.127
    | From: =?Utf-8?B?RGVsbCBCb3k=?= <Dell >
    | Subject: Error When Generating System Health Report
    | Date: Mon, 5 Mar 2007 09:44:25 -0800
    | Lines: 11
    | Message-ID: <>
    | MIME-Version: 1.0
    | Content-Type: text/plain;
    | charset="Utf-8"
    | Content-Transfer-Encoding: 8bit
    | X-Newsreader: Microsoft CDO for Windows 2000
    | Content-Class: urn:content-classes:message
    | Importance: normal
    | Priority: normal
    | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
    | Newsgroups: microsoft.public.windows.vista.performance_maintenance
    | Path: TK2MSFTNGHUB02.phx.gbl
    | Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.vista.performance_maintenance:2817
    | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
    | X-Tomcat-NG: microsoft.public.windows.vista.performance_maintenance
    |
    | I'm setting up a brand new Dell Dimension which has a good spec, e.g.
    Intel
    | E6600 processor, 2GB 666Mhz RAM, etc, and latest Windows updates. When I
    go
    | to Control Panel �System And Maintenance - Performance Information And
    Tools
    | �Advanced Tools �Generate A System Health Report I get the following
    error:
    |
    | "An error occurred while attempting to generate the report. The wait for
    the
    | report generation tool to finish has timed out."
    |
    | Has anyone any ideas on this? The machine doesn't appear unhealthy (I've
    | checked the Windows event Logs) but I would like to check it oput with a
    | System Health Report if possible.
    |
     
    Ken Zhao [MSFT], Mar 6, 2007
    #2
    1. Advertisements

  3. Dell Boy

    Dell Boy Guest

    Ken,

    Thank you for your response.

    Screen shot has been sent as requested.

    I booted to safe mode but couldn’t work out how to launch the System Health
    Report so can’t tell you whether the problem occurs in Safe Mode or not.

    The machine is going to the client for whom it is intended in a couple of
    hours and from then on I won’t have easy access to it but this might be worth
    looking in to anyway?


     
    Dell Boy, Mar 6, 2007
    #3
  4. Hello Malcolm,

    I have received your screenshot but I cannot find any similar issues
    reported so far in our internal knowledge base. Therefore, I suggest you
    try to boot into Clean Boot mode to see if the issue still occurs in this
    mode.

    Note: You must be logged on as an administrator or a member of the
    Administrators group to follow these steps. If the computer is connected to
    a network, network policy settings may also prevent you from follow these
    steps.

    1. Click Start, type msconfig.exe in the Start Search box, and then press
    ENTER.
    If you are prompted for an administrator password or confirmation, type
    your password, or click Continue.
    2. On the General tab, click Selective Startup, and then clear the Load
    system services and Load Startup Items check boxes. You cannot clear the
    Use Original Boot.ini check box.
    3. On the Services tab, select the Hide All Microsoft Services check box,
    and then click Disable All.
    4. Click OK, and then click Restart to restart the computer.
    5. After Windows starts, determine whether the symptoms still occur.
    Note: Look closely at the General tab to make sure that the check boxes
    that you cleared are still cleared. Continue to step 6 if all of the check
    boxes are cleared. If the Load System Services check box is the only
    disabled check box, the computer is not clean-booted. If additional check
    boxes are disabled and the issue is not resolved, you may require help from
    the manufacturer of the program that puts a check mark back in Msconfig.

    If all of the check boxes are cleared, and the issue is not resolved, you
    may have to repeat steps 1 through 5. However, you may also have to clear
    the Load System Services check box on the General tab. This temporarily
    disables Microsoft services (such as, Networking, Plug and Play, Event
    Logging, and Error Reporting) and permanently deletes all restore points
    for the System Restore utility. Do not do this if you want to keep your
    restore points for System Restore or if you must use a Microsoft service to
    test the issue.

    6. Click Start, type msconfig.exe in the Start Search box, and then press
    ENTER.
    If you are prompted for an administrator password or confirmation, type
    your password, or click Continue.
    7. On the General tab, select the Load system services check box, click OK,
    and then click Restart to restart the computer. If the issue continues, the
    issue is with one of the System services. If the issue does not continue,
    repeat this step for the Load Startup Items check box. After the issue
    occurs, the last item that you selected is the item where the issue is
    occurring.

    Note: We strongly recommend that you do not use System Configuration
    Utility to modify the Boot Advanced options on the computer without the
    direction of a Microsoft support engineer. Doing this may make the computer
    unusable.

    Thanks & Regards,

    Ken Zhao

    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security <http://www.microsoft.com/security>
    ====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    ====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.





    --------------------
    | Thread-Topic: Error When Generating System Health Report
    | thread-index: Acdf21LylglpPaTySquXCl+Fod3pvw==
    | X-WBNR-Posting-Host: 89.243.71.64
    | From: =?Utf-8?B?RGVsbCBCb3k=?= <Dell >
    | References: <>
    <rQ$p$>
    | Subject: RE: Error When Generating System Health Report
    | Date: Tue, 6 Mar 2007 02:36:39 -0800
    | Lines: 103
    | Message-ID: <>
    | MIME-Version: 1.0
    | Content-Type: text/plain;
    | charset="Utf-8"
    | Content-Transfer-Encoding: 8bit
    | X-Newsreader: Microsoft CDO for Windows 2000
    | Content-Class: urn:content-classes:message
    | Importance: normal
    | Priority: normal
    | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
    | Newsgroups: microsoft.public.windows.vista.performance_maintenance
    | Path: TK2MSFTNGHUB02.phx.gbl
    | Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.vista.performance_maintenance:2857
    | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
    | X-Tomcat-NG: microsoft.public.windows.vista.performance_maintenance
    |
    | Ken,
    |
    | Thank you for your response.
    |
    | Screen shot has been sent as requested.
    |
    | I booted to safe mode but couldn’t work out how to launch the System
    Health
    | Report so can’t tell you whether the problem occurs in Safe Mode or not.
    |
    | The machine is going to the client for whom it is intended in a couple of
    | hours and from then on I won’t have easy access to it but this might be
    worth
    | looking in to anyway?
    |
    |
    | ""Ken Zhao [MSFT]"" wrote:
    |
    | > Hello Dell,
    | >
    | > Thank you for using newsgroup!
    | >
    | > From your post, I have performed research but I cannot find the similar
    | > error reported so far. Would you please send me a screen shot of the
    error
    | > message so that I can perform further research?
    | >
    | > To take a screen shot:
    | > ---------------------
    | > 1. Press the Pr Scrn key once on the keyboard when the error message
    | > appears.
    | > 2. Click Start, go to Run, enter MSPAINT in the open dialog box, and
    then
    | > Click OK.
    | > 3. Use Ctrl + V to paste the screenshot to the canvas.
    | > 4. From the File menu, go to Save and save it as a JPG file.
    | > 5. Send the JPG file to me as an attachment.
    | > My mailbox:
    | >
    | > Please test the issue in Safe Mode to see if the issue still occurs in
    this
    | > mode.
    | > Start your computer in safe mode
    | >
    <http://windowshelp.microsoft.com/Windows/en-US/Help/323ef48f-7b93-4079-a48a
    | > -5c58eec904a11033.mspx>
    | >
    | > Thanks & Regards,
    | >
    | > Ken Zhao
    | >
    | > Microsoft Online Support
    | > Microsoft Global Technical Support Center
    | >
    | > Get Secure! - www.microsoft.com/security
    <http://www.microsoft.com/security>
    | > ====================================================
    | > When responding to posts, please "Reply to Group" via your newsreader
    so
    | > that others may learn and benefit from your issue.
    | > ====================================================
    | > This posting is provided "AS IS" with no warranties, and confers no
    rights.
    | >
    | >
    | >
    | >
    | >
    | > --------------------
    | > | Thread-Topic: Error When Generating System Health Report
    | > | thread-index: AcdfTerIRzdxlMW2SqibmVFqPSdn9Q==
    | > | X-WBNR-Posting-Host: 89.240.210.127
    | > | From: =?Utf-8?B?RGVsbCBCb3k=?= <Dell >
    | > | Subject: Error When Generating System Health Report
    | > | Date: Mon, 5 Mar 2007 09:44:25 -0800
    | > | Lines: 11
    | > | Message-ID: <>
    | > | MIME-Version: 1.0
    | > | Content-Type: text/plain;
    | > | charset="Utf-8"
    | > | Content-Transfer-Encoding: 8bit
    | > | X-Newsreader: Microsoft CDO for Windows 2000
    | > | Content-Class: urn:content-classes:message
    | > | Importance: normal
    | > | Priority: normal
    | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
    | > | Newsgroups: microsoft.public.windows.vista.performance_maintenance
    | > | Path: TK2MSFTNGHUB02.phx.gbl
    | > | Xref: TK2MSFTNGHUB02.phx.gbl
    | > microsoft.public.windows.vista.performance_maintenance:2817
    | > | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
    | > | X-Tomcat-NG: microsoft.public.windows.vista.performance_maintenance
    | > |
    | > | I'm setting up a brand new Dell Dimension which has a good spec, e.g.
    | > Intel
    | > | E6600 processor, 2GB 666Mhz RAM, etc, and latest Windows updates.
    When I
    | > go
    | > | to Control Panel â�System And Maintenance - Performance
    Information And
    | > Tools
    | > | â�Advanced Tools â�Generate A System Health Report I get the
    following
    | > error:
    | > |
    | > | "An error occurred while attempting to generate the report. The wait
    for
    | > the
    | > | report generation tool to finish has timed out."
    | > |
    | > | Has anyone any ideas on this? The machine doesn't appear unhealthy
    (I've
    | > | checked the Windows event Logs) but I would like to check it oput
    with a
    | > | System Health Report if possible.
    | > |
    | >
    | >
    |
     
    Ken Zhao [MSFT], Mar 7, 2007
    #4
  5. Dell Boy

    Dell Boy Guest

    Thank you for this.

    As I said in my previous post the computer has now had to be passed on to
    the client for whom I was preparing it so I can't carry the troubleshooting
    out.

    However, if it does come in to my possesion again I will follow your advice.

    Many thanks.

     
    Dell Boy, Mar 8, 2007
    #5
  6. Ok, no problem.

    Thanks & Regards,

    Ken Zhao

    Microsoft Online Support
    Microsoft Global Technical Support Center

    Get Secure! - www.microsoft.com/security <http://www.microsoft.com/security>
    ====================================================
    When responding to posts, please "Reply to Group" via your newsreader so
    that others may learn and benefit from your issue.
    ====================================================
    This posting is provided "AS IS" with no warranties, and confers no rights.




    --------------------
    | Thread-Topic: Error When Generating System Health Report
    | thread-index: Acdhtp/mGQJZrZkhTZukj5o7POgnxg==
    | X-WBNR-Posting-Host: 89.243.129.93
    | From: =?Utf-8?B?RGVsbCBCb3k=?= <Dell >
    | References: <>
    <rQ$p$>
    <>
    <yXJL$>
    | Subject: RE: Error When Generating System Health Report
    | Date: Thu, 8 Mar 2007 11:18:59 -0800
    | Lines: 233
    | Message-ID: <>
    | MIME-Version: 1.0
    | Content-Type: text/plain;
    | charset="Utf-8"
    | Content-Transfer-Encoding: 8bit
    | X-Newsreader: Microsoft CDO for Windows 2000
    | Content-Class: urn:content-classes:message
    | Importance: normal
    | Priority: normal
    | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
    | Newsgroups: microsoft.public.windows.vista.performance_maintenance
    | Path: TK2MSFTNGHUB02.phx.gbl
    | Xref: TK2MSFTNGHUB02.phx.gbl
    microsoft.public.windows.vista.performance_maintenance:3004
    | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
    | X-Tomcat-NG: microsoft.public.windows.vista.performance_maintenance
    |
    | Thank you for this.
    |
    | As I said in my previous post the computer has now had to be passed on to
    | the client for whom I was preparing it so I can't carry the
    troubleshooting
    | out.
    |
    | However, if it does come in to my possesion again I will follow your
    advice.
    |
    | Many thanks.
    |
    | ""Ken Zhao [MSFT]"" wrote:
    |
    | > Hello Malcolm,
    | >
    | > I have received your screenshot but I cannot find any similar issues
    | > reported so far in our internal knowledge base. Therefore, I suggest
    you
    | > try to boot into Clean Boot mode to see if the issue still occurs in
    this
    | > mode.
    | >
    | > Note: You must be logged on as an administrator or a member of the
    | > Administrators group to follow these steps. If the computer is
    connected to
    | > a network, network policy settings may also prevent you from follow
    these
    | > steps.
    | >
    | > 1. Click Start, type msconfig.exe in the Start Search box, and then
    press
    | > ENTER.
    | > If you are prompted for an administrator password or confirmation,
    type
    | > your password, or click Continue.
    | > 2. On the General tab, click Selective Startup, and then clear the Load
    | > system services and Load Startup Items check boxes. You cannot clear
    the
    | > Use Original Boot.ini check box.
    | > 3. On the Services tab, select the Hide All Microsoft Services check
    box,
    | > and then click Disable All.
    | > 4. Click OK, and then click Restart to restart the computer.
    | > 5. After Windows starts, determine whether the symptoms still occur.
    | > Note: Look closely at the General tab to make sure that the check boxes
    | > that you cleared are still cleared. Continue to step 6 if all of the
    check
    | > boxes are cleared. If the Load System Services check box is the only
    | > disabled check box, the computer is not clean-booted. If additional
    check
    | > boxes are disabled and the issue is not resolved, you may require help
    from
    | > the manufacturer of the program that puts a check mark back in
    Msconfig.
    | >
    | > If all of the check boxes are cleared, and the issue is not resolved,
    you
    | > may have to repeat steps 1 through 5. However, you may also have to
    clear
    | > the Load System Services check box on the General tab. This temporarily
    | > disables Microsoft services (such as, Networking, Plug and Play, Event
    | > Logging, and Error Reporting) and permanently deletes all restore
    points
    | > for the System Restore utility. Do not do this if you want to keep your
    | > restore points for System Restore or if you must use a Microsoft
    service to
    | > test the issue.
    | >
    | > 6. Click Start, type msconfig.exe in the Start Search box, and then
    press
    | > ENTER.
    | > If you are prompted for an administrator password or confirmation,
    type
    | > your password, or click Continue.
    | > 7. On the General tab, select the Load system services check box, click
    OK,
    | > and then click Restart to restart the computer. If the issue continues,
    the
    | > issue is with one of the System services. If the issue does not
    continue,
    | > repeat this step for the Load Startup Items check box. After the issue
    | > occurs, the last item that you selected is the item where the issue is
    | > occurring.
    | >
    | > Note: We strongly recommend that you do not use System Configuration
    | > Utility to modify the Boot Advanced options on the computer without the
    | > direction of a Microsoft support engineer. Doing this may make the
    computer
    | > unusable.
    | >
    | > Thanks & Regards,
    | >
    | > Ken Zhao
    | >
    | > Microsoft Online Support
    | > Microsoft Global Technical Support Center
    | >
    | > Get Secure! - www.microsoft.com/security
    <http://www.microsoft.com/security>
    | > ====================================================
    | > When responding to posts, please "Reply to Group" via your newsreader
    so
    | > that others may learn and benefit from your issue.
    | > ====================================================
    | > This posting is provided "AS IS" with no warranties, and confers no
    rights.
    | >
    | >
    | >
    | >
    | >
    | > --------------------
    | > | Thread-Topic: Error When Generating System Health Report
    | > | thread-index: Acdf21LylglpPaTySquXCl+Fod3pvw==
    | > | X-WBNR-Posting-Host: 89.243.71.64
    | > | From: =?Utf-8?B?RGVsbCBCb3k=?= <Dell >
    | > | References: <>
    | > <rQ$p$>
    | > | Subject: RE: Error When Generating System Health Report
    | > | Date: Tue, 6 Mar 2007 02:36:39 -0800
    | > | Lines: 103
    | > | Message-ID: <>
    | > | MIME-Version: 1.0
    | > | Content-Type: text/plain;
    | > | charset="Utf-8"
    | > | Content-Transfer-Encoding: 8bit
    | > | X-Newsreader: Microsoft CDO for Windows 2000
    | > | Content-Class: urn:content-classes:message
    | > | Importance: normal
    | > | Priority: normal
    | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
    | > | Newsgroups: microsoft.public.windows.vista.performance_maintenance
    | > | Path: TK2MSFTNGHUB02.phx.gbl
    | > | Xref: TK2MSFTNGHUB02.phx.gbl
    | > microsoft.public.windows.vista.performance_maintenance:2857
    | > | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
    | > | X-Tomcat-NG: microsoft.public.windows.vista.performance_maintenance
    | > |
    | > | Ken,
    | > |
    | > | Thank you for your response.
    | > |
    | > | Screen shot has been sent as requested.
    | > |
    | > | I booted to safe mode but couldn’t work out how to launch the
    System
    | > Health
    | > | Report so can’t tell you whether the problem occurs in Safe
    Mode or not.
    | > |
    | > | The machine is going to the client for whom it is intended in a
    couple of
    | > | hours and from then on I won’t have easy access to it but this
    might be
    | > worth
    | > | looking in to anyway?
    | > |
    | > |
    | > | ""Ken Zhao [MSFT]"" wrote:
    | > |
    | > | > Hello Dell,
    | > | >
    | > | > Thank you for using newsgroup!
    | > | >
    | > | > From your post, I have performed research but I cannot find the
    similar
    | > | > error reported so far. Would you please send me a screen shot of
    the
    | > error
    | > | > message so that I can perform further research?
    | > | >
    | > | > To take a screen shot:
    | > | > ---------------------
    | > | > 1. Press the Pr Scrn key once on the keyboard when the error
    message
    | > | > appears.
    | > | > 2. Click Start, go to Run, enter MSPAINT in the open dialog box,
    and
    | > then
    | > | > Click OK.
    | > | > 3. Use Ctrl + V to paste the screenshot to the canvas.
    | > | > 4. From the File menu, go to Save and save it as a JPG file.
    | > | > 5. Send the JPG file to me as an attachment.
    | > | > My mailbox:
    | > | >
    | > | > Please test the issue in Safe Mode to see if the issue still occurs
    in
    | > this
    | > | > mode.
    | > | > Start your computer in safe mode
    | > | >
    | >
    <http://windowshelp.microsoft.com/Windows/en-US/Help/323ef48f-7b93-4079-a48a
    | > | > -5c58eec904a11033.mspx>
    | > | >
    | > | > Thanks & Regards,
    | > | >
    | > | > Ken Zhao
    | > | >
    | > | > Microsoft Online Support
    | > | > Microsoft Global Technical Support Center
    | > | >
    | > | > Get Secure! - www.microsoft.com/security
    | > <http://www.microsoft.com/security>
    | > | > ====================================================
    | > | > When responding to posts, please "Reply to Group" via your
    newsreader
    | > so
    | > | > that others may learn and benefit from your issue.
    | > | > ====================================================
    | > | > This posting is provided "AS IS" with no warranties, and confers no
    | > rights.
    | > | >
    | > | >
    | > | >
    | > | >
    | > | >
    | > | > --------------------
    | > | > | Thread-Topic: Error When Generating System Health Report
    | > | > | thread-index: AcdfTerIRzdxlMW2SqibmVFqPSdn9Q==
    | > | > | X-WBNR-Posting-Host: 89.240.210.127
    | > | > | From: =?Utf-8?B?RGVsbCBCb3k=?= <Dell >
    | > | > | Subject: Error When Generating System Health Report
    | > | > | Date: Mon, 5 Mar 2007 09:44:25 -0800
    | > | > | Lines: 11
    | > | > | Message-ID: <>
    | > | > | MIME-Version: 1.0
    | > | > | Content-Type: text/plain;
    | > | > | charset="Utf-8"
    | > | > | Content-Transfer-Encoding: 8bit
    | > | > | X-Newsreader: Microsoft CDO for Windows 2000
    | > | > | Content-Class: urn:content-classes:message
    | > | > | Importance: normal
    | > | > | Priority: normal
    | > | > | X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.2757
    | > | > | Newsgroups: microsoft.public.windows.vista.performance_maintenance
    | > | > | Path: TK2MSFTNGHUB02.phx.gbl
    | > | > | Xref: TK2MSFTNGHUB02.phx.gbl
    | > | > microsoft.public.windows.vista.performance_maintenance:2817
    | > | > | NNTP-Posting-Host: tk2msftsbfm01.phx.gbl 10.40.244.148
    | > | > | X-Tomcat-NG:
    microsoft.public.windows.vista.performance_maintenance
    | > | > |
    | > | > | I'm setting up a brand new Dell Dimension which has a good spec,
    e.g.
    | > | > Intel
    | > | > | E6600 processor, 2GB 666Mhz RAM, etc, and latest Windows updates.
    | > When I
    | > | > go
    | > | > | to Control Panel ââ�System And Maintenance - Performance
    | > Information And
    | > | > Tools
    | > | > | ââ�Advanced Tools ââ�Generate A System Health Report
    I get the
    | > following
    | > | > error:
    | > | > |
    | > | > | "An error occurred while attempting to generate the report. The
    wait
    | > for
    | > | > the
    | > | > | report generation tool to finish has timed out."
    | > | > |
    | > | > | Has anyone any ideas on this? The machine doesn't appear
    unhealthy
    | > (I've
    | > | > | checked the Windows event Logs) but I would like to check it oput
    | > with a
    | > | > | System Health Report if possible.
    | > | > |
    | > | >
    | > | >
    | > |
    | >
    | >
    |
     
    Ken Zhao [MSFT], Mar 9, 2007
    #6
  7. Dell Boy

    CMossTrek Guest

    I have exactly the same issue. When trying to use the Generate Systems
    Health Report I get an error message that the report has "timed out".
    Here is the complete message:
    Error: An error occured while attempting to generate the report.
    The wait for the report generation tool to finish has timed out.

    I have aleady wiped my system once (as suggested by the Microsoft Help Desk)
    and since done a clean-install, but the error has remained.

    I have also notice on the web (not within this site) that other user have
    similar/same issue with this Report generation.

    Can you help?




     
    CMossTrek, Apr 14, 2007
    #7
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.