file sharing between XP home(sp3) and Vista home premium(sp1)

Discussion in 'Windows Vista Networking' started by kimberly in oregon, Jun 9, 2008.

  1. I am having trouble to access files from vista to xp(NTFS). There is no
    problem for XP to get in vista but not vice versa.

    I can see the name of xp computer from vista network but just could not get
    in. When I click the XP for access, no error messages but just stuck there
    forever and I could not kill it after ~20 minutes even with "task manager" so
    that I had to reboot the computer. Both computers connect same private
    network wirelessly.

    I made both computer workgroup name same, off firewalls, and filesharing
    configuration according to MS manual for each computers as follows;
    xp file sharing: check "share this folder on the network"
    check "allow network users to change my files

    vista network and sharing center:
    On: "network discovery", "file sharing", "public folder sharing", "printer
    sharing".
    Off: "password protected sharing", "Media sharing".

    Share folder : check "share this folder" and add "everyone" for "permission".

    Perhaps, I need to do more adjustment for my xp beyond turning off firewall
    and file sharing configuration as above but don't know what. I am working on
    this for 2 days and nights without success. I've even tried to connect by
    cross cable but it did not work either. Please someone help me.
     
    kimberly in oregon, Jun 9, 2008
    #1
    1. Advertisements

  2. kimberly in oregon

    Mick Murphy Guest

    Kimberley, read my advice carefully. Run the XP wizard, as well as get the
    settings right in Vista!

    http://technet.microsoft.com/en-us/library/bb727037.aspx

    Have a read of the above link re Vista File and Printer Sharing.

    Permissions/Share info is there as well.

    If using Norton, McAfee, Trend Micro I.S., make sure file and printer
    sharing is enabled in THEIR firewall (or LAN allowed, depending on how their
    Exceptions are worded in their Firewall)

    1st thing to do is make sure that the Workgroup Name of ALL the computers is
    the SAME.

    In Vista Network and Sharing:

    Network Discovery: ON (So it can see the other computers)

    Network set to Private (Public is for hotspots, airports, etc)

    File Sharing: ON

    Public Folder Sharing: ON (Vista’s Public Folder is the same as XP’s Shared
    Docs)

    Password Protected: OFF (unless you want to set up identical usernames and
    passwords (passwords can be different) on ALL computers in your Network) If
    you have it ON, you will be asked for a username and password when you try to
    access a Vista computer from an XP computer, or a Vista computer.

    Also, run the XP’s Home or Small Office Network File and Printer Sharing
    Wizard to include Vista in your “New†Network, even if you had an XP Network
    set up prior to adding a Vista computer to it(redoing the Wizard seems to
    work for XP machines!).

    In “My Network Placesâ€: “Set up a Home or Small Office Networkâ€
    OR under Accessories > Communications > Network Setup Wizard > Allow File
    and Printer Sharing.
     
    Mick Murphy, Jun 9, 2008
    #2
    1. Advertisements

  3. Thank you Mick, but technet.microsoft.com/en-us/library/bb727037.aspx was the
    manual my work based on. And I also followed all your advice step by step,
    ran xp network wizard 3 times, have same workgroup name for both computers,
    turn off firewalls instead of making exceptions because that opening port
    part was hard for me to follow. All the settings in the Vista network file
    sharing were set to exactly same as what you said and it still does not
    cooperate with me..^^.

    Again, please note I can open Vista's files from XP but not XP's folder from
    Vista. Any other suggestions? Do you know about cross cable? Some said that
    it would be instantly connected by cross cable but mine did not work....>.<
     
    kimberly in oregon, Jun 9, 2008
    #3
  4. kimberly in oregon

    Mick Murphy Guest

    Normal Cat5 cable that you hook from your computer your router is "Patch"
    cable--

    "Crossover" is a way of not having a Router; 1 comp can hook up to a Modem,
    and the 2 computers link with the Crossover cable.
    But using that way, you still have to set up the sharing!


    Mick Murphy - Qld - Australia
     
    Mick Murphy, Jun 9, 2008
    #4
  5. We have two laptops with Vista and an old workstation with XP, and have all
    of the files we regularly share in the Share of Share Docs folders.

    Network Places in XP always works, but the workstation does not always show
    in Network of the laptops (Vista). We have installed the ineroperability
    patch. Rebooting the Vista computer normally solves this problem temporarily.

    We have Office 2007 installed on all computers. When we access an Office
    2007 format file (docx or xlsx) on a Vista computer from the XP Workstation,
    and then save it is when we usually have the problem. A loop develops and
    the save never finishes. We can close the application on the XP with Task
    Manager, but the network communication between the two computers remains
    inoperable. Usually rebooting the Vista machine will restore operability,
    but sometimes both must be rebooted.

    In this scenario the Vista laptops do not reboot correctly. It gets stuck
    logging off. I am still experimenting, but it seems that if I remove the
    laptop from the docking station which removes it from the network the laptop
    will continue the reboot. Otherwise I have to remove the battery.

    I believe this is a Microsoft problem, but have not advised them because I
    am still experimenting. I suspect or attempts to fix this problem with the
    current software will be futile. Hope this helps. If not know that you are
    not alone.
     
    Don Klokkenga, Jun 9, 2008
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.