getting lots of errors and crashes, is this typical- HELP!

Discussion in 'Windows Media Center' started by PatLA, May 21, 2004.

  1. PatLA

    PatLA Guest

    Subject getting lots of errors and crashes, is this typica
    I've had this gateway 510 for a couple of weeks and use it principally as the dvr, and am getting lots of errors and crashes and these were just in the past 2 day
    There was an unexpected failure. (Error code: 1034

    There was an unexpected failure.(Error code: 518

    System.Runtime.InteropServices.COMException (0xC00D002F): Exception from HRESULT: 0xC00D002F
    at ehiPlay.DvrPlayerClass.OpenDvrMedia(String wzFilename
    at ServiceBus.UIFramework.VideoViewport.OpenDvrMedia(String stFilename
    at MediaCenter.Video.DvrSession._LoadMedia(IMedia media
    at MediaCenter.Video.VideoSession.LoadMedia(IMedia media

    Faulting application ehrec.exe, version 5.1.2600.1321, faulting module mscorwks.dll, version 1.1.4322.573, fault address 0x00091783

    Unable to unlock media when stopping recording

    Program Guide info not available. Data may be corrupt. Please reboot and try again

    Faulting application ehRec.exe, version 5.1.2600.1217, faulting module mscorwks.dll, version 1.1.4322.573, fault address 0x00091783
     
    PatLA, May 21, 2004
    #1
    1. Advertisements

  2. PatLA

    bigmuny Guest

    So you are having problems also...hmmmm...I just got my 610XL MC about 10 days ago and already I have had to do two complete recoveries of the total system..then I lost Quicken 2004 b/c Tech said it didn't come with the package but that they probably installed a test program in my computer...who knows...sometimes the wireless keyboard won't work at all..I've run every test that I can think of to track the problem down to no avail..so that's why I did the total recovery as I didn't have much to lose being so new and all..if you don't have anything to lose I would suggest you do the same...more than likely it is a problem with another program you have installed that is causing the problems. I have gotten the same error codes as you..especially the 1034...anyway..good luc

    ----- PatLA wrote: ----

    Subject getting lots of errors and crashes, is this typica
    I've had this gateway 510 for a couple of weeks and use it principally as the dvr, and am getting lots of errors and crashes and these were just in the past 2 day
    There was an unexpected failure. (Error code: 1034

    There was an unexpected failure.(Error code: 518

    System.Runtime.InteropServices.COMException (0xC00D002F): Exception from HRESULT: 0xC00D002F
    at ehiPlay.DvrPlayerClass.OpenDvrMedia(String wzFilename
    at ServiceBus.UIFramework.VideoViewport.OpenDvrMedia(String stFilename
    at MediaCenter.Video.DvrSession._LoadMedia(IMedia media
    at MediaCenter.Video.VideoSession.LoadMedia(IMedia media

    Faulting application ehrec.exe, version 5.1.2600.1321, faulting module mscorwks.dll, version 1.1.4322.573, fault address 0x00091783

    Unable to unlock media when stopping recording

    Program Guide info not available. Data may be corrupt. Please reboot and try again

    Faulting application ehRec.exe, version 5.1.2600.1217, faulting module mscorwks.dll, version 1.1.4322.573, fault address 0x00091783
     
    bigmuny, May 22, 2004
    #2
    1. Advertisements

  3. It is certainly not typical. There are of course instances where people get
    computers that are simply duds (some OEMs have more of these than others).
    It has nothing to do with MCE itself but is more of a reality of computers
    these days. If a complete restore of the system using OEM-supplied recovery
    disks (or partition) still does not resolve the issue, then it is likely a
    hardware-related problem. OEM support will usually make you do a recovery a
    couple of times before even considering doing anything about it.

    One thing to note when reading newgroups or boards... most people that post
    here have problems or questions. Thus, at a quick glance of the content of
    the group it seems like there are a lot of problems with MCE (or on other
    boards, whatever software is the subject). This is just natural as people
    with no problems are not likely to post. I would assume that the vast
    majority of MCE owners don't have problems. I have 2 machines (Gateway 901x
    and HP873n) and they are mostly troublefree.
     
    Michel Bordeleau [MVP], May 23, 2004
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.