IAS and Radius Service on Windows 2003 Server

Discussion in 'Server Networking' started by Jay, Sep 20, 2006.

  1. Jay

    Jay Guest


    I was wondering if anyone would be able to help me with this. I recently
    installed the IAS service on a Windows 2003 server and enabled a radius
    client. I followed the IAS Operations Guide best pratice. The interface to
    the radius server is a Cisco PIX. When I go to log in on the PIX it'll
    return a user credentials error message.

    This is the message I can find in the radius server event log. The
    pre-shared keys are the same too. The is the address of the PIX.

    I've changed the name of the server and the domain account (to cisco) but in
    troubleshooting I was using my own administrative account.

    Event Type: Error
    Event Source: IAS
    Event Category: None
    Event ID: 3
    Date: 9/19/2006
    Time: 1:17:48 PM
    User: N/A
    Computer: SERVERNAME
    Access request for user cisco was discarded.
    Fully-Qualified-User-Name = DOMAIN\cisco
    NAS-IP-Address =
    NAS-Identifier = <not present>
    Called-Station-Identifier = <not present>
    Calling-Station-Identifier =
    Client-Friendly-Name = PIX
    Client-IP-Address =
    NAS-Port-Type = <not present>
    NAS-Port = 11
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Reason-Code = 2
    Reason = There are not sufficient access rights to process the request.


    Please let me know how I could troubleshoot this some more

    Thank you in advance,
    Jay, Sep 20, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.