ICW puking

Discussion in 'Windows Small Business Server' started by MattK, May 2, 2012.

  1. MattK

    MattK Guest

    I just removed ISA 2004 off a SBS 2003 box in preparation for a SBS
    2011 migration.

    After removal of ISA I am attempting to run the ICW wizard and it
    pukes at step 2 of the 4. enclosed is an output of the log but i
    can't determine what is puking. any suggestions based on the log?
    thanks!

    5/2/2012 7:45 AM
    E:\Program Files\Microsoft Windows Small Business Server\Networking\ICW
    \wizinet.dll, version 5.2.2893.0
    calling CNetCommit::ValidatePropertyBag ().
    Call to Querying for the property bag () returned ok.
    Call to Reading hardware selection () returned ok.
    Hardware selection: 0
    Call to Validating hardware selection () returned ok.
    Call to Reading LAN NIC Guid () returned ok.
    LAN NIC Guid: {D19A416B-3B48-4FE9-BCAC-3D3E024293BD}
    Call to Validating LAN NIC Guid () returned ok.
    Call to Validating NIC properties () returned ok.
    Broadband selection: 1
    Call to Validating broadband selection () returned ok.
    calling CNetCommit::ValidateRouterConnectionProperties ().
    Call to Reading UPNP selection () returned ok.
    NOT a UPnP router
    Call to Reading Router IP () returned ok.
    Router IP: 192.168.22.1
    Call to Validating Router IP () returned ok.
    Call to Reading preferred DNS server IP () returned ok.
    Preferred DNS server IP: 75.75.75.75
    Call to Validating preferred DNS server IP () returned ok.
    Call to Reading alternate DNS server IP () returned ok.
    Alternate DNS server IP: 75.75.76.76
    Call to Validating alternate DNS server IP () returned ok.
    Call to Validating preferred and alternate DNS servers () returned ok.
    Call to Reading router on second NIC () returned ok.
    Call to CNetCommit::ValidateRouterConnectionProperties () returned ok.

    5/2/2012 7:45 AM
    E:\Program Files\Microsoft Windows Small Business Server\Networking\ICW
    \wizrfire.dll, version 5.2.2893.0
    calling CRFireCommit::ValidatePropertyBag (0x2de220).
    Call to This is a Router Single Nic configuration only Web Publishing
    will be configured, Basic Firewall will not be configured. () returned
    ok.
    Call to Reading web publishing selection () returned ok.
    Web publishing selections:
    OWA publishing: 0
    RUP publishing: 0
    Monitoring publishing: 0
    OMA publishing: 0
    RPC publishing: 0
    Companyweb publishing: 0
    ROOT publishing: 0
    Call to CRFireCommit::ValidatePropertyBag () returned ok.

    5/2/2012 7:45 AM
    E:\Program Files\Microsoft Windows Small Business Server\Networking\ICW
    \wizcert.dll, version 5.2.2893.0
    Calling CCertCommit::ValidatePropertyBag
    Require SSL for OWA: 1
    Require SSL for Remote Portal: 1
    Require SSL for Monitoring: 0
    Require SSL for OMA: 0
    Require SSL for CompanyWeb: 0
    Require 128 Bit Encryption: 1
    Cert selection: -1
    CCertCommit::ValidatePropertyBag returned OK

    5/2/2012 7:45 AM
    E:\Program Files\Microsoft Windows Small Business Server\Networking\ICW
    \wizemail.dll, version 5.2.2893.0
    calling CEmailCommit::ValidatePropertyBag ().
    calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
    0x6e50c).
    Call to pdispPPPBag->QueryInterface () returned ok.
    calling ReadInt4 (0x2de220, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 1.
    calling CValidatePropertyUtil.ValidatePropertyInteger ().
    Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
    calling ReadBool (0x2de220, F71526DD-9C19-4fe9-B7DB-FD4360909275).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 1.
    calling CValidatePropertyUtil.ValidatePropertyBool ().
    Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
    calling ReadBool (0x2de220, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 0.
    calling CValidatePropertyUtil.ValidatePropertyBool ().
    Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
    calling ReadBool (0x2de220, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 1.
    calling CValidatePropertyUtil.ValidatePropertyBool ().
    Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
    calling ReadInt4 (0x2de220, C9D8697B-0D4C-4767-8F1F-4CE415098774).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 0x2.
    calling CValidatePropertyUtil.ValidatePropertyLong ().
    Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
    calling ReadString (0x2de220, 01637C90-B142-41C4-8520-6B2E0F891BE7).
    Call to ReadString () returned ok.
    The out param of ReadString() is mydomain.com.
    calling ReadBool (0x2de220, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 1.
    calling ReadInt4 (0x2de220, C9D8697B-0D4C-4767-8F1F-4CE415098774).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 0x2.
    calling CValidatePropertyUtil.ValidatePropertyHostName ().
    Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
    calling AttachCommiter.Validate(pPPPBag) (0x2de220, 01637C90-
    B142-41C4-8520-6B2E0F891BE7).
    calling CAttachCommiter::Validate (0x2de220).
    calling CAttachCommiter::Validate:ReadVariant (0x0).
    calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
    calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
    Call to CAttachCommiter::Validate () returned ok.
    Call to CEMailCommit::ValidatePropertyBag () returned ok.
    calling CNetCommit::Commit (3007008).
    calling CNetCommit::ValidatePropertyBag ().
    Call to Querying for the property bag () returned ok.
    Property bag is not dirty, skipping validation
    calling CNetCommit::Common ().
    calling CNetCommit::GetLanNicInfo ().
    LAN NIC Guid: {D19A416B-3B48-4FE9-BCAC-3D3E024293BD}
    Call to Converting LAN NIC Guid () returned ok.
    Call to Getting IP address for the LAN NIC () returned ok.
    Call to Reading in the LAN NIC info () returned ok.
    Call to Fixing the TCP/IP NIC Binding order () returned ok.
    Dhcp server is installed and not disabled
    Call to Set DHCP Server to start up automatically () returned ok.
    DNS server is installed and not disabled
    Call to Changing startup type for DNS () returned ok.
    Call to Clearing DNS server entries on the LAN NIC () returned ok.
    Call to Setting DNS server IP for the LAN NIC () returned ok.
    Call to Resetting DNS recursion timeout () returned ok.
    Call to Resetting client dns query timouts in config.dat () returned
    ok.
    Call to DsGetDcName for local domain name () returned ok.
    Call to Disabling RRAS routing () returned ok.
    calling CNetCommit::DoRouter ().
    Call to Clearing the default gateway on the LAN NIC () returned ok.
    Call to Setting default gateway on the LAN NIC () returned ok.
    Call to Setting DNS forwarders () returned ok.
    Call to Preparing DNS for DNS listener reset () returned ok.
    Call to Resetting DNS listeners () returned ok.
    URL to the router is http://192.168.22.1
    Call to Adding routers IP address to the intranet zone () returned ok.
    Call to CNetCommit::DoRouter () returned ok.
    Call to Configuring for router connection () returned ok.
    calling ConfigureIE ().
    calling SetInternetOptions ((null), (null), (null)).
    calling InternetSetOptionA (NULL,
    INTERNET_OPTION_PER_CONNECTION_OPTION).
    Call to InternetSetOptionA () returned ok.
    Call to SetInternetOptions () returned ok.
    calling SetInternetOptions (Connect to Small Business Server, (null),
    (null)).
    calling InternetSetOptionA (NULL,
    INTERNET_OPTION_PER_CONNECTION_OPTION).
    Call to InternetSetOptionA () returned ok.
    calling _SetRegInt4Value (HKEY_CURRENT_USER, RemoteAccess\Profile
    \Connect to Small Business Server, CoverExclude, 3).
    Call to _SetRegInt4Value () returned ok.
    Call to SetInternetOptions () returned ok.
    calling InternetSetOption_AutodialConnection ().
    Call to InternetSetOption_AutodialConnection () returned ok.
    calling InternetSetOption_AutodialMode (4).
    Call to InternetSetOption_AutodialMode () returned ok.
    calling InternetSetOption_DisableAutodial (0).
    Call to InternetSetOption_DisableAutodial () returned ok.
    Call to ConfigureIE () returned ok.
    Call to Configuring IE for router connection () returned ok.
    Call to Notifying client setup for Default gateway as the router ()
    returned ok.
    calling RegisterMSBOExchangeBP (0).
    Error 0x1 returned from call to RegisterMSBOExchangeBP().
    Call to Unregistering the smtp sink () returned ok.
    Call to GetLocalDomainName () returned ok.
    Call to Reading in the local domain name () returned ok.
    Local Domain Name is: internaldomain.local
    Call to Enabling secure dynamic DNS updates () returned ok.
    Call to Disabling RoundRobin for DNS server () returned ok.
    Call to GetLocalDomainName () returned ok.
    Call to Configuring DHCP options () returned ok.
    Call to Disabling the RASUTO service () returned ok.
    Call to Configuring w32time parameters for fulltime () returned ok.
    Call to Configuring the time service () returned ok.
    Call to Notifying RWW for ISA () returned ok.
    Call to CNetCommit::Common () returned ok.
    Call to CNetCommit::Commit () returned ok.
    calling CRFireCommit::CommitEx (0x2de220).
    calling CRFireCommit::ValidatePropertyBag (0x2de220).
    Call to This is a Router Single Nic configuration only Web Publishing
    will be configured, Basic Firewall will not be configured. () returned
    ok.
    Call to Reading web publishing selection () returned ok.
    Web publishing selections:
    OWA publishing: 0
    RUP publishing: 0
    Monitoring publishing: 0
    OMA publishing: 0
    RPC publishing: 0
    Companyweb publishing: 0
    ROOT publishing: 0
    Call to CRFireCommit::ValidatePropertyBag () returned ok.
    Call to GetPrivateNICGuid () returned ok.
    Call to GetIPAddress for private nic () returned ok.
    Call to GetSubnetMask for private nic () returned ok.
    RUP is published
    Call to Fixing the inheritance for root dir () returned ok.
    Call to Unpublishing the default web site () returned ok.
    Call to Fixing the inheritance for companyweb dir () returned ok.
    Call to Unpublishing companyweb () returned ok.
    Call to Publishing the default web site () returned ok.
    Call to Publishing companyweb () returned ok.
    Call to Notify RUP for OWA () returned ok.
    Call to Notify RUP for Monitoring () returned ok.
    Call to Notify RUP for RPC () returned ok.
    Call to Notify RUP for Companyweb () returned ok.
    Call to Restricting exhchangeoma to local server only () returned ok.
    Call to Restricting ConnectComputer to local network only () returned
    ok.
    Call to GetInternetServerName () returned ok.
    Call to GetNetbiosDomainName () returned ok.
    Call to NotifyProvisioning () returned ok.
    Call to Limiting number of connections () returned ok.
    Call to Sending RUP intro mail () returned ok.
    Call to Saving web publishing selection () returned ok.
    calling Set Web Publishing Rules (0x0).
    Call to GetPrivateNICGuid () returned ok.
    Call to WMIGetIPAddress () returned ok.
    Error 0x8007041d returned from call to IISConfig Set().
    Error 0x8007041d returned from call to CRFireCommit::Commit().
    Calling CCertCommit::CommitEx
    Calling CCertCommit::ValidatePropertyBag
    Require SSL for OWA: 1
    Require SSL for Remote Portal: 1
    Require SSL for Monitoring: 0
    Require SSL for OMA: 0
    Require SSL for CompanyWeb: 0
    Require 128 Bit Encryption: 1
    Cert selection: -1
    CCertCommit::ValidatePropertyBag returned OK
    Opening the cert store returned OK
    Reading the computer name returned OK
    Reading the fully qualified server name returned OK
    CCertCommit::EnableSSL returned OK
    CCertCommit::RequireSSL returned OK
    CCertCommit::NotifyRemoteUserPortal returned OK
    Reading the Internet Server Name returned OK
    Updating provisioning info returned OK
    Sending RUP intro mail returned OK
    CCertCommit::SaveUserSelections returned OK
    CCertCommit::CommitEx returned OK
    calling CEmailCommit::Commit (0x2d8910).
    calling CEmailCommit::ValidatePropertyBag ().
    calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
    0x6e488).
    Call to pdispPPPBag->QueryInterface () returned ok.
    calling ReadInt4 (0x2de220, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 1.
    calling CValidatePropertyUtil.ValidatePropertyInteger ().
    Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
    calling ReadBool (0x2de220, F71526DD-9C19-4fe9-B7DB-FD4360909275).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 1.
    calling CValidatePropertyUtil.ValidatePropertyBool ().
    Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
    calling ReadBool (0x2de220, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 0.
    calling CValidatePropertyUtil.ValidatePropertyBool ().
    Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
    calling ReadBool (0x2de220, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 1.
    calling CValidatePropertyUtil.ValidatePropertyBool ().
    Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
    calling ReadInt4 (0x2de220, C9D8697B-0D4C-4767-8F1F-4CE415098774).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 0x2.
    calling CValidatePropertyUtil.ValidatePropertyLong ().
    Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
    calling ReadString (0x2de220, 01637C90-B142-41C4-8520-6B2E0F891BE7).
    Call to ReadString () returned ok.
    The out param of ReadString() is mydomain.com.
    calling ReadBool (0x2de220, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 1.
    calling ReadInt4 (0x2de220, C9D8697B-0D4C-4767-8F1F-4CE415098774).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 0x2.
    calling CValidatePropertyUtil.ValidatePropertyHostName ().
    Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
    calling AttachCommiter.Validate(pPPPBag) (0x2de220, 01637C90-
    B142-41C4-8520-6B2E0F891BE7).
    calling CAttachCommiter::Validate (0x2de220).
    calling CAttachCommiter::Validate:ReadVariant (0x0).
    calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
    calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
    Call to CAttachCommiter::Validate () returned ok.
    Call to CEMailCommit::ValidatePropertyBag () returned ok.
    calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
    0x6e4f4).
    Call to pdispPPPBag->QueryInterface () returned ok.
    calling ReadInt4 (0x2de220, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
    Call to ReadInt4 () returned ok.
    The out param of ReadInt4() is 1.
    calling GetDomainAndControllerNames ().
    Call to GetDomainAndControllerNames () returned ok.
    calling GetOrganizationName (\\myserver.internaldomain.local,
    DC=internaldomain,DC=local).
    Call to GetOrganizationName () returned ok.
    calling GetFirstAdministrativeGroup (\\myserver.internal.local,
    DC=internaldomain,DC=local, internaldomain).
    Call to GetFirstAdministrativeGroup () returned ok.
    calling GetFirstRoutingGroup (\\myserver.internaldomain.local,
    DC=internaldomain,DC=local, internaldomain, first administrative
    group).
    Call to GetFirstRoutingGroup () returned ok.
    Call to SetCookieAuthentication () returned ok.
    Call to Enabling Wireless admin for OMA () returned ok.
    Call to Setting SMTPSVC to start up automatically () returned ok.
    calling CAttachCommiter::Commit (0x2de220).
    calling CAttachCommiter::Commit:ReadVariant(GUID_ATTACH_CONFIG) (0x0).
    calling CAttachCommiter::Commit:m_spDoc.CoCreateInstance (0x0).
    calling CAttachCommiter::Commit:m_spDoc->loadXML (0x0).
    calling CAttachCommiter::Commit:WriteConfigFile (0x0).
    calling CAttachCommiter::WriteConfigFile (0x40000003).
    calling CAttachCommiter::WriteConfigFile:_GetSBSInstallDir (0x0).
    calling CAttachCommiter::WriteConfigFile:m_spDoc->save (0x0).
    Call to CAttachCommiter::WriteConfigFile () returned ok.
    calling CAttachCommiter::Commit:ShouldEnableSink (0x0).
    calling CAttachCommiter::ShouldEnableSink (0x40000003).
    calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectSingleNode
    (0x40000003).
    calling CAttachCommiter::ShouldEnableSink:spEnabledNode->get_text
    (0x40000003).
    calling CAttachCommiter::ShouldEnableSink:m_spDoc->selectNodes
    (0x40000003).
    calling CAttachCommiter::ShouldEnableSink:pUnsafeAttachsNodeList-
    Call to CAttachCommiter::ShouldEnableSink () returned ok.
    calling
    CAttachCommiter::Commit:pSink.CoCreateInstance(SecAttsEventSink)
    (0x0).
    calling CAttachCommiter::Commit:pSink->Register (0x0).
    Call to CAttachCommiter::Commit () returned ok.
    calling EnableSMTPConnector (0x2de220, \
    \myserver.internaldomain.local, DC=internaldomain,DC=local,
    internaldomain).
    calling DoRecipientPolicy (0x2de220).
    calling ReadString (0x2de220, 01637C90-B142-41C4-8520-6B2E0F891BE7).
    Call to ReadString () returned ok.
    The out param of ReadString() is mydomain.com.
    calling FinalValidateHostName (mydomain.com).
    Call to FinalValidateHostName () returned ok.
    calling GetDefaultPolicy (0x6e360).
    Call to GetDefaultPolicy () returned ok.
    calling GetPostmasterProxyAddresses ().
    Call to GetPostMasterProxyAddresses () returned ok.
    calling UpdatePostmasterAddress (0x20bde08, mydomain.com).
    Call to UpdatePostmasterAddress () returned ok.
    calling ResetRUS ().
    calling spADs->SetInfo() ().
    Call to spADs->SetInfo () returned ok.
    Ignoring return value from call to spADs->SetInfo().
    calling spADs->SetInfo() ().
    Call to spADs->SetInfo () returned ok.
    Ignoring return value from call to spADs->SetInfo().
    Call to ResetRUS () returned ok.
    calling SetDefaultPolicy (mydomain.com).
    calling SetDefaultSMTPRecipient (0x21fec10, mydomain.com).
    calling GetDefaultRecipientArray (0x21fec10, 0x6e2ec).
    Call to GetDefaultRecipientArray () returned ok.
    calling SafeArrayGetLBound (0x20bfeb8, 1, 0x6e2e4).
    The out param of SafeArrayGetLBound() is 0.
    calling SafeArrayGetUBound (0x20bfeb8, 1, 0x6e2e0).
    The out param of SafeArrayGetUBound() is 2.
    calling SafeArrayGetElement (0x20bfeb8, 0, 0x6e29c).
    The out param of SafeArrayGetElement() is smtp:mad:internaldomain.local.
    calling UpdateRUS (smtp:mad:internaldomain.local).
    Call to UpdateRUS () returned ok.
    calling SafeArrayPutElement (0x20bfeb8, 0,
    smtp:mad:internaldomain.local).
    Call to SafeArrayPutElement () returned ok.
    calling SafeArrayGetElement (0x20bfeb8, 1, 0x6e29c).
    The out param of SafeArrayGetElement() is SMTP:mad:mydomain.com.
    calling UpdateRUS (SMTP:mad:mydomain.com).
    Call to UpdateRUS () returned ok.
    calling SafeArrayPutElement (0x20bfeb8, 1, SMTP:mad:mydomain.com).
    Call to SafeArrayPutElement () returned ok.
    calling SafeArrayGetElement (0x20bfeb8, 2, 0x6e29c).
    The out param of SafeArrayGetElement() is
    X400:c=US;a= ;p=internaldomain;o=Exchange;.
    calling SafeArrayCopy (0x20bfeb8).
    Call to SafeArrayCopy () returned ok.
    calling LogSet_gatewayProxy ().
    Element: smtp:mad:internaldomain.local.
    Element: SMTP:mad:mydomain.com.
    Element: X400:c=US;a= ;p=internaldomain;o=Exchange;.
    Call to LogSet_gatewayProxy () returned ok.
    calling pADs->SetInfo ().
    Call to pADs->SetInfo () returned ok.
    calling SafeArrayDestroy (0x20bfeb8).
    Ignoring return value from call to SafeArrayDestroy().
    Call to SetDefaultSMTPRecipient () returned ok.
    Call to SetDefaultPolicy () returned ok.
    calling KickRUS ().
    calling spADs->SetInfo() ().
    Call to spADs->SetInfo () returned ok.
    Ignoring return value from call to spADs->SetInfo().
    calling spADs->SetInfo() ().
    Call to spADs->SetInfo () returned ok.
    Ignoring return value from call to spADs->SetInfo().
    Call to KickRUS () returned ok.
    Call to DoRecipientPolicy () returned ok.
    calling DoSmtpRelayIp ().
    Call to DoSmtpRelayIp () returned ok.
    calling ADsGetObject (LDAP://myserver.internaldomain.local/
    CN=SmallBusiness SMTP connector,CN=Connections,CN=first routing
    group,CN=Routing Groups,CN=first administrative
    group,CN=Administrative Groups,CN=internaldomain,CN=Microsoft
    Exchange,CN=Services,CN=Configuration,DC=internaldomain,DC=local,
    IADs, 0x6e3cc).
    Call to ADsGetObject () returned ok.
    calling spADs->SetInfo ().
    Call to spADs->SetInfo () returned ok.
    calling spADs->SetInfo ().
    Call to spADs->SetInfo () returned ok.
    calling _RestartService (RESvc, 1).
    Call to _RestartService () returned ok.
    calling _RestartService (SMTPSvc, 1).
    Call to _RestartService () returned ok.
    Call to EnableSMTPConnector () returned ok.
    Call to Getting NETBIOS domain name () returned ok.
    NETBIOS domain name: internaldomain
    Call to Enabling NTLM on /public () returned ok.
    calling ReadBool (0x2de220, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
    Call to ReadBool () returned ok.
    The out param of ReadBool() is 0.
    calling CommitPOP3 (0x2de220).
    calling _StopService (MSPOP3Connector, 1).
    Ignoring return value from call to _StopService().
    Call to CommitPOP3 () returned ok.
    calling _SetRegInt4Value (HKEY_LOCAL_MACHINE, SOFTWARE\Microsoft
    \SmallBusinessServer\Connectivity\ICW, Last_MailOption_Exchange, 1).
    Ignoring return value from call to _SetRegInt4Value().
    calling _SetRegInt4Value (HKEY_LOCAL_MACHINE, SOFTWARE\Microsoft
    \SmallBusinessServer\Connectivity\ICW, Last_DequeueOption_Exchange,
    1).
    Ignoring return value from call to _SetRegInt4Value().
    Call to CEMailCommit::Commit () returned ok.
    calling GetBOConnector ().
    Call to GetBOConnector () returned ok.
    calling spADs->PutEx (ADS_PROPERTY_CLEAR,
    msExchSmtpOutboundSecurityPassword).
    Call to spADs->PutEx () returned ok.
    calling spADs->SetInfo ().
    Call to spADs->SetInfo () returned ok.
     
    MattK, May 2, 2012
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.