MC with Time Warner Cable

Discussion in 'Windows Media Center' started by reggienyc999, Dec 29, 2006.

  1. reggienyc999

    reggienyc999 Guest

    I have DTV service with Time Warner Cable. Their set-top box and remote
    control do not use an IR remote signal therefore MC does not recognize the IR
    during the set-up wizard. As a result, the MC tv channels will not change
    using the MC remote and tv programs will not record the correct channel as
    programmed from the tv guide. Also, the pc has a dual tv tuner and I'm using
    1 set-top box (Pioneer-Voyager) Any suggestions on fixing the channels and tv
    recording problems?
     
    reggienyc999, Dec 29, 2006
    #1
    1. Advertisements

  2. You will need a second set top box to use dual tuners, as you cannot get
    separate Guide data for each tuner. And the STB's have to be IR controlled,
    or there's no way they'll work with the Media Center IR Receiver and IR
    emitters. There is no RF based version of these components for MCE.
     
    Doug Knox - [MS-MVP], Dec 29, 2006
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.