Migrate to new server

Discussion in 'DNS Server' started by DD, Nov 26, 2008.

  1. DD

    DD Guest

    We will replace the old windows 2k DC to the new windows 2003 DC , thd old
    win 2K running as DNS server, can i migrate the dns and dhcp from the old 2K
    DC to the new 2003 DC ?
     
    DD, Nov 26, 2008
    #1
    1. Advertisements

  2. Hello DD,

    For DHCP:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;325473

    For DNS make your live easy and use AD integrated zones on the 2000 DC, then
    you have just to install the new server as DC and install after reboot DNS
    role. Then just wait.

    See here for migration plan:
    !!!NEVER START BEFORE HAVING CREATED AND TESTED A BACKUP OF YOU DATA/MACHINE!!!

    One question first:
    Is the old server also Exchange server and will it be taken out of the domain
    forever, when the new server is running?

    - On the old server open DNS management console and check that you are running
    Active directory integrated zone (easier for replication, if you have more
    then one DNS server)

    - run replmon from the run line or repadmin /showrepl, dcdiag and netdiag
    from the command prompt on the old machine to check for errors, if you have
    some post the complete output from the command here or solve them first.
    For this tools you have to install the support\tools\suptools.msi from the
    2000 or 2003 installation disk.

    - run adprep /forestprep and adprep /domainprep from the 2003 installation
    disk against the 2000 server, with an account that is member of the Schema
    admins, to upgrade the schema to the new version

    - Install the new machine as a member server in your existing domain

    - configure a fixed ip and set the preferred DNS server to the old DNS server
    only

    - run dcpromo and follow the wizard to add the 2003 server to an existing
    domain

    - if you are prompted for DNS configuration choose Yes (also possible that
    no DNS preparation occur), then install DNS after the reboot

    - for DNS give the server time for replication, at least 15 minutes. Because
    you use Active directory integrated zones it will automatically replicate
    the zones to the new server. Open DNS management console to check that they
    appear

    - if the new machine is domain controller and DNS server run again replmon,
    dcdiag and netdiag on both domain controllers

    - if you have no errors, make the new server Global catalog server, open
    Active directory Sites and Services and then double-click sitename, double-click
    Servers, click your domain controller, right-click NTDS Settings, and then
    click Properties, on the General tab, click to select the Global catalog
    check box (http://support.microsoft.com/?id=313994)

    - Transfer, NOT seize the 5 FSMO roles to the new Domain controller (http://support.microsoft.com/kb/324801)

    - you can see in the event viewer (Directory service) that the roles are
    transferred, also give it some time

    - reconfigure the DNS configuration on your NIC of the 2003 server, preferred
    DNS itself, secondary the old one

    - if you use DHCP do not forget to reconfigure the scope settings to point
    to the new installed DNS server

    - export and import of DHCP database (if needed) (http://support.microsoft.com/kb/325473)


    Demoting the old DC (if needed)

    - reconfigure your clients/servers that they not longer point to the old
    DC/DNS server on the NIC

    - to be sure that everything runs fine, disconnect the old DC from the network
    and check with clients and servers the connectivity, logon and also with
    one client a restart to see that everything is ok

    - then run dcpromo to demote the old DC, if it works fine the machine will
    move from the DC's OU to the computers container, where you can delete it
    by hand. Can be that you got an error during demoting at the beginning, then
    uncheck the Global catalog on that DC and try again

    - check the DNS management console, that all entries from the machine are
    disappeared or delete them by hand if the machine is off the network for ever

    - also you have to start AD sites and services and delete the old servername
    under the site, this will not be done during promotion

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Nov 26, 2008
    #2
    1. Advertisements

  3. DD

    DD Guest

    DD, Nov 27, 2008
    #3
  4. Hello DD,

    If you will take out a DC which has the FSMO roles you have to transfer them
    if you like to control it. During demotion the roles are also transferred
    but you have no control to which DC, if you have more then one.

    Seizing is only needed, if the FSMO role holder is crashed for example and
    you are not able to transfer them from the running machine.

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Nov 27, 2008
    #4
  5. DD

    DD Guest

    Currently we have two server running AD, so how to verify which one has the
    FSMO,

    Sorry , not very goold in this area.
     
    DD, Nov 28, 2008
    #5
  6. Hello DD,

    Run in a command prompt:

    netdom query fsmo

    For this tools you have to install the support\tools\suptools.msi from the
    2000 or 2003 installation disk.

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Nov 28, 2008
    #6
  7. DD

    DD Guest

    This is the query , which one is FSMO ? USGS0001 OR USGS0002 ?
    C:\Documents and Settings\idadmin1>netdom query fsmo
    Schema owner usgs0002.kep.co.id
    Domain role owner usgs0002.kep.co.id
    PDC role usgs0001.kep.co.id
    RID pool manager usgs0001.kep.co.id
    Infrastructure owner usgs0001.kep.co.id

    I will be migrating the server tomorrow, hope got your reply bytoday.

    Thanks
     
    DD, Nov 28, 2008
    #7
  8. Meinolf Weber, Nov 28, 2008
    #8
  9. DD

    DD Guest

    Can I transfer all the role to 001 before I replace the server 2,if can how
    to do the transfer
    If I can transfer the all the role to 001, do I still need to run the
    trasfer process ?

    the new server will be replacing the 002 server.
     
    DD, Nov 28, 2008
    #9
  10. Hello DD,

    Yes, you can transfer them to server 1. After changing i would transfer them
    to the 2003 DC.

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Nov 28, 2008
    #10
  11. DD

    DD Guest

    I try to run adprep /forest it said THE scema master replication not
    complete.

    i try to replicate from the site and service, error message, error occur
    during attemp synchorize the domain controler, access is denied.

    The two AD can not replicate to each other.
    I also getting the event 1586
    http://support.microsoft.com/kb/269417
     
    DD, Nov 29, 2008
    #11
  12. DD

    DD Guest

    I try to transfer the
    Schema owner usgs0002.kep.co.id
    Domain role owner usgs0002.kep.co.id from server 2 to server 1
    using MMC snap in ,
    when i click on active directy schema, it said you only have permission to
    view , the id i use to login is administrator id which is under domain admin,
    schema , enterprise admin group.

    I can's run the adprep /forestprep.
     
    DD, Nov 29, 2008
    #12
  13. Hello DD,

    Run diagnostic tools dcdiag /v, netdiag /v and repadmin /showrepl and post
    the result here. You can also pipe the output to a textfile if the command
    prompt doesn't list it complete:

    dcdiag /v > C:\dcdiag.log

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Dec 1, 2008
    #13
  14. Hello DD,

    To move the schema you account must be member of the schema admin group.
    Try to move it from the other DC.

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Dec 1, 2008
    #14
  15. DD

    DD Guest

    I only have two DC, server 1 and server 2,i try to move from server 1 to
    server 2, no othere domain can move.

    the server2 crash last month, suspect the server one still hardcode the old
    server 2 GUID. how to remove this entry by using the ntdutil?
    when I try to use the replicate now from server 1 to server 2, it said
    access denied, i delete the default server 2 automatically generated site and
    service and recreate , still can replicate said dns lookup error, but i can
    resolve server 2 computer name

    cause of the replication incomplete, i could run the adprep /forest in
    server 2.
     
    DD, Dec 1, 2008
    #15
  16. Hello DD,

    I see that in the you are posting a lot of questions. Maybe some of them
    stick together because of the existing problem. So please wait until the
    main problems are solved, seems in your case the Active directory configuration.
    If this works correct start with new postings. Now you post that there was
    a server crash from server2, did you reinstall it from backup or image or
    just create a new server with the same name?

    To remove a DC from the database follow this article:
    http://support.microsoft.com/kb/555846/en-us

    Best regards

    Meinolf Weber
     
    Meinolf Weber, Dec 1, 2008
    #16
  17. DD

    DD Guest

    dcdiag from usg001

    Domain Controller Diagnosis

    Performing initial setup:
    * Verifying that the local machine usg001, is a DC.
    * Connecting to directory service on server USG001.
    * Collecting site info.
    * Identifying all servers.
    * Found 2 DC(s). Testing 1 of them.
    Done gathering initial info.

    Doing initial required tests

    Testing server: Default-First-Site-Name\USG001
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    * Active Directory RPC Services Check
    ......................... USG001 passed test Connectivity

    Doing primary tests

    Testing server: Default-First-Site-Name\USG001
    Starting test: Replications
    * Replications Check
    ......................... USG001 passed test Replications
    Test omitted by user request: Topology
    Test omitted by user request: CutoffServers
    Starting test: NCSecDesc
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=OCBA,DC=co,DC=id
    * Security Permissions Check for
    CN=Configuration,DC=OCBA,DC=co,DC=id
    * Security Permissions Check for
    DC=OCBA,DC=co,DC=id
    ......................... USG001 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    ......................... USG001 passed test NetLogons
    Starting test: Advertising
    The DC USG001 is advertising itself as a DC and having a DS.
    The DC USG001 is advertising as an LDAP server
    The DC USG001 is advertising as having a writeable directory
    The DC USG001 is advertising as a Key Distribution Center
    Warning: USG001 is not advertising as a time server.
    The DS USG001 is advertising as a GC.
    ......................... USG001 failed test Advertising
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN="NTDS Setting
    DEL:15bb4502-7524-4072-8806-b05d374c49ec",CN=USG002,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    Warning: CN="NTDS Settings
    DEL:15bb4502-7524-4072-8806-b05d374c49ec",CN=USG002,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    is the Schema Owner, but is deleted.
    Role Domain Owner = CN="NTDS Setting
    DEL:15bb4502-7524-4072-8806-b05d374c49ec",CN=USG002,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    Warning: CN="NTDS Settings
    DEL:15bb4502-7524-4072-8806-b05d374c49ec",CN=USG002,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    is the Domain Owner, but is deleted.
    Role PDC Owner = CN=NTDS
    Settings,CN=USG001,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    Role Rid Owner = CN=NTDS
    Settings,CN=USG001,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    Role Infrastructure Update Owner = CN=NTDS
    Settings,CN=USG001,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    ......................... USG001 failed test KnowsOfRoleHolders
    Starting test: RidManager
    * Available RID Pool for the Domain is 4115 to 1073741823
    * USG001.OCBA.COM is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 3115 to 3614
    * rIDNextRID: 2951
    * rIDPreviousAllocationPool is 2615 to 3114
    ......................... USG001 passed test RidManager
    Starting test: MachineAccount
    * SPN found :LDAP/USG001.OCBA.COM/OCBA.COM
    * SPN found :LDAP/USG001.OCBA.COM
    * SPN found :LDAP/USG001
    * SPN found :LDAP/USG001.OCBA.COM/UOBKHID
    * SPN found
    :LDAP/96677f00-40fa-41c1-8bb1-c11a92606a04._msdcs.OCBA.COM
    * SPN found
    :E3514235-4B06-11D1-AB04-00C04FC2DCD2/96677f00-40fa-41c1-8bb1-c11a92606a04/OCBA.COM
    * SPN found :HOST/USG001.OCBA.COM/OCBA.COM
    * SPN found :HOST/USG001.OCBA.COM
    * SPN found :HOST/USG001
    * SPN found :HOST/USG001.OCBA.COM/UOBKHID
    * SPN found :GC/USG001.OCBA.COM/OCBA.COM
    ......................... USG001 passed test MachineAccount
    Starting test: Services
    * Checking Service: Dnscache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: RpcSs
    * Checking Service: RPCLOCATOR
    * Checking Service: w32time
    w32time Service is stopped on [USG001]
    * Checking Service: TrkWks
    * Checking Service: TrkSvr
    * Checking Service: NETLOGON
    * Checking Service: Dnscache
    * Checking Service: NtFrs
    SMTPSVC Service is stopped on [USG001]
    ......................... USG001 failed test Services
    Test omitted by user request: OutboundSecureChannels
    Starting test: ObjectsReplicated
    USG001 is in domain DC=OCBA,DC=co,DC=id
    Checking for CN=USG001,OU=Domain Controllers,DC=OCBA,DC=co,DC=id in
    domain DC=OCBA,DC=co,DC=id on 1 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS
    Settings,CN=USG001,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id
    in domain CN=Configuration,DC=OCBA,DC=co,DC=id on 1 servers
    Object is up-to-date on all servers.
    ......................... USG001 passed test ObjectsReplicated
    Starting test: frssysvol
    * The File Replication Service Event log test
    Error: No record of File Replication System, SYSVOL started.
    The Active Directory may be prevented from starting.
    There are errors after the SYSVOL has been shared.
    The SYSVOL can prevent the AD from starting.
    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 11/29/2008 11:25:14
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=4a58d9b4-6646-4882-ab40-e5438eae8771,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG002,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=4a58d9b4-6646-4882-ab40-e5438eae8771,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 11/29/2008 11:45:14
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG001,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id

    The nTDSConnection object cn=4a58d9b4-6646-4882-ab40-e5438eae8771,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG002,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=4a58d9b4-6646-4882-ab40-e5438eae8771,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 11/29/2008 13:05:15
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG001,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 11/29/2008 14:40:16
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG001,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id

    The nTDSConnection object cn=10.192.16.1,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG002,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=10.192.16.1,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 11/30/2008 14:40:24
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG001,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id

    The nTDSConnection object cn=10.192.16.1,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG002,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=10.192.16.1,cn=ntds
    settings,cn=USG001,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 12/01/2008 08:05:31
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id
    is conflicting with cn=USG001,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    An Warning Event occured. EventID: 0x800034FA
    Time Generated: 12/01/2008 15:05:34
    Event String: Following is the summary of warnings and errors

    encountered by File Replication Service while

    polling the Domain Controller

    USG001.OCBA.COM for FRS replica set

    configuration information.





    The nTDSConnection object cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id is conflicting with cn=USG001\
    cnf:97867f81-06da-4a63-907d-ee4debdc4cf3,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id.
    Using cn=72d6065a-469b-46da-a5ce-f0362006c85e,cn=ntds
    settings,cn=USG002,cn=servers,cn=default-first-site-name,cn=sites,cn=configuration,dc=OCBA,dc=co,dc=id






    ......................... USG001 passed test frssysvol
    Starting test: kccevent
    * The KCC Event log test
    Found no KCC errors in Directory Service Event log in the last 15
    minutes.
    ......................... USG001 passed test kccevent
    Starting test: systemlog
    * The System Event log test
    Found no errors in System Event log in the last 60 minutes.
    ......................... USG001 passed test systemlog

    Running enterprise tests on : OCBA.COM
    Starting test: Intersite
    Skipping site Default-First-Site-Name, this site is outside the scope

    provided by the command line arguments provided.
    ......................... OCBA.COM passed test Intersite
    Starting test: FsmoCheck
    GC Name: \\USG001.OCBA.COM
    Locator Flags: 0xe00001bd
    PDC Name: \\USG001.OCBA.COM
    Locator Flags: 0xe00001bd
    Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
    A Time Server could not be located.
    The server holding the PDC role is down.
    Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
    1355
    A Good Time Server could not be located.
    KDC Name: \\USG001.OCBA.COM
    Locator Flags: 0xe00001bd
    ......................... OCBA.COM failed test FsmoCheck
     
    DD, Dec 1, 2008
    #17
  18. Hello DD,

    As you said before, the crashed machine is a problem and you have also to
    SEIZE the 2 missing FSMO roles to the existing DC.

    Warning: CN="NTDS Settings
    DEL:15bb4502-7524-4072-8806-b05d374c49ec",CN=USG002,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id

    is the Schema Owner, but is deleted.

    Warning: CN="NTDS Settings
    DEL:15bb4502-7524-4072-8806-b05d374c49ec",CN=USG002,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=OCBA,DC=co,DC=id

    is the Domain Owner, but is deleted.


    Best regards

    Meinolf Weber
     
    Meinolf Weber, Dec 1, 2008
    #18
  19. DD

    DD Guest

    NETDIAG FILE TOO LONG , can't post it here.

    I getting this error message

    I can do the replicate now from the site service service. but when i run the
    adpredp /forest from the server 2.
    The schema master did not complete a replication cycle after the last
    reboot. Th
    e schema master must complete at least one replication cycle before the
    schema c
    an be extended.
    [User Action]
    Verify that the schema master is connected to the network and can
    communicate wi
    th other domain controllers. Use the Sites and Services snap-in to
    replicate be
    tween the schema operations master and at least one replication partner.
    After r
    eplication has succeeded, run adprep again.
     
    DD, Dec 1, 2008
    #19
  20. Hello DD,

    That's clear because you have no schema master at the moment as to see from
    the dcdiag output.

    Best regards

    Meinolf Weber


     
    Meinolf Weber, Dec 1, 2008
    #20
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.