PXE boot from a RIS server

Discussion in 'Server Networking' started by rocker40, Jan 8, 2008.

  1. rocker40

    rocker40 Guest

    I have installed a RIS server and have a DHCP server running now with a few
    IP's for it. I have th server ruuning and when I go to boot from PXE (from
    the network card) it starts to boot from there but than gives me this error.
    'No DHCP or ProxyDHCP offers made"
    Any ideas?
    Thanks
     
    rocker40, Jan 8, 2008
    #1
    1. Advertisements

  2. Mathieu CHATEAU, Jan 8, 2008
    #2
    1. Advertisements

  3. rocker40

    rocker40 Guest

    Actually I got the DHCP to work I think. My media was bad. but now the next
    step it is saying "no boot filename received" I created the RIS and it
    created the shared file and boot folder I think. I created it using the
    instructions from the same link you sent me.
    Any ideas?
     
    rocker40, Jan 8, 2008
    #3
  4. Mathieu CHATEAU, Jan 8, 2008
    #4
  5. rocker40

    rocker40 Guest

    I do not have option 60 to choose from. i found that answer somewhere else
    also and it said something about reinstalling it from a RDP cd if if it
    wasn't there. How do I get option 60?
     
    rocker40, Jan 9, 2008
    #5
  6. Hello,

    check that you followed this way:
    How To Set Up and Configure Remote Installation Services in Windows 2000
    http://support.microsoft.com/kb/298750/en-us

    Else uninstall and install again following this step by step. You may found
    other more detailed tutorial through search engine.
     
    Mathieu CHATEAU, Jan 9, 2008
    #6
  7. rocker40

    rocker40 Guest

    Actually according to the microsoft article you sent those options should not
    be configured if the server is the same as the DHCP server. So those options
    were not configured on mine wich is right as the RIS is the same server as
    DHCP.
    This is the article I used to install. Do you what files should be in the
    remote install folder?
    Also I found this in the instructions "
    RIS supports only the remote installation of Windows 2000 Professional. "

    I am tring to install server2003 is this a problem?
     
    rocker40, Jan 9, 2008
    #7
  8. About W2K3, the main problem is that you can only build one partition.

    I wouldn't use RIS for servers, but the new WIM image (require SP2 to
    upgrade RIS)
     
    Mathieu CHATEAU, Jan 9, 2008
    #8
  9. rocker40

    rocker40 Guest

    I do have service pak2 on the server I am using. I have no other choice to
    load this server as it is a NAS server from IOMEGA and it has no cdrom or USB
    port or Floppy:( But I should be able to load it this way right?
     
    rocker40, Jan 9, 2008
    #9
  10. WIM is just a new format for delivering OS. It can be deployed through the
    network as RIS, but the image server must be running W2K3 SP2 to be able to
    deliver in wim format.
     
    Mathieu CHATEAU, Jan 9, 2008
    #10
  11. rocker40

    rocker40 Guest

    do I need to install something for that?



     
    rocker40, Jan 9, 2008
    #11
  12. Is your image server (ris) a W2K3 with SP2 ? are you in mixed mode ?
     
    Mathieu CHATEAU, Jan 10, 2008
    #12
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.