RC2 and Constant Reloading of Internal Graphics Drivers

Discussion in 'Windows Vista Hardware' started by cmcarthy, Oct 11, 2006.

  1. cmcarthy

    cmcarthy Guest

    Hi all,

    I seem to be in an endless loop with RC2 and my internal graphics card.
    Unfortunately, my eMachines doesn't have an true "Disable Internal Graphics"
    command in the BIOS.

    I'm currently using a dedicated graphics card for Vista. However, Vista
    keeps finding the internal graphics and keeps loading the drivers which turn
    aero off and reverts me to Vista basic (ughh). Rebooting usually resets aero,
    but Vista quickly finds and loads the Internal Graphics drivers again. Is
    there a command to stop RC2 from scanning for new hardware? Is there a
    command to just select rejection of the graphics card? When I go to the
    Device Manager, the Internal Graphics doesn't even show up so that I can
    disable it!

    Please help :'(
     
    cmcarthy, Oct 11, 2006
    #1
    1. Advertisements

  2. If you can't turn off the internal graphics adapter in the bios, there may
    be a M/B jumper to do the same.

    You did go to the eMachine website and search there for the answer to your
    problem, right?

    --

    Regards,

    Richard Urban
    Microsoft MVP Windows Shell/User
    (For email, remove the obvious from my address)

    Quote from George Ankner:
    If you knew as much as you think you know,
    You would realize that you don't know what you thought you knew!
     
    Richard Urban, Oct 11, 2006
    #2
    1. Advertisements

  3. cmcarthy

    Lang Murphy Guest

    Have you tried disabling the internal graphics in Device Manager?

    Lang
     
    Lang Murphy, Oct 11, 2006
    #3
  4. cmcarthy

    JW Guest

    What is your other Graphics card and what interface from it are you using?
    VGA,VGI etc?
    Are you able in your BIOS to specify that your internal card is not your
    primary card?
     
    JW, Oct 11, 2006
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.