Router to Router over DSL

Discussion in 'Server Networking' started by Mark, Feb 23, 2004.

  1. Mark

    Mark Guest

    I have two separate domains that I want to have always
    connected via RRAS. Each domain has a RRAS VPN server
    running NAT also. They are both multihomed with one NIC
    for a DSL connection and the other to the private network.
    Internally one network is 192.168.0.0/24 and the other is
    192.168.1.0/24. After the routers are connected I was
    going to implement a TRUST between the two. Also, after
    the connection, how does browsing work? I need to know how
    to configure the RRAS-RRAS connection. Thanks!
     
    Mark, Feb 23, 2004
    #1
    1. Advertisements

  2. Mark

    Bill Grant Guest

    This request would require a book, not a newsgroup reply.

    You could start by reading the section on router to router VPN
    connections in the help files. Then you could look at what the Microsoft
    website has to offer. You will find more info than you can possibly digest!

    Once you have your two sites linked by a router to router VPN, name
    resolution, browsing and trusts work just the same way as they would in any
    two subnets linked by a router.
     
    Bill Grant, Feb 24, 2004
    #2
    1. Advertisements

  3. Mark

    Mark Guest

    didn't put in the correct keywords. Do you know a specific
    article ID?
     
    Mark, Feb 24, 2004
    #3
  4. Mark

    Bill Grant Guest

    If you want to be completely flooded with references, just type in VPN.
    But if you type in router to router you should get a manageable list. The
    one called "Virtual Private Networking with Windows 2000: Deploying
    Router-toRouter VPNs" by Joseph Davies will give you more info than you ever
    wished for!
     
    Bill Grant, Feb 25, 2004
    #4
  5. Mark

    Mark Guest

    Thanks! I'll try it
     
    Mark, Feb 25, 2004
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.