RRAS / VPN routing issue / multiple target routes

Discussion in 'Server Networking' started by Alexander Gräf, Jan 5, 2004.

  1. Hello,

    I have a RRAS-Server (Windows Server 2003 Standard), allowing VPN/L2TP
    access from clients, distributing IP-addresses from a static range
    192.168.1.40-192.168.1.79/255.255.255.0 to them. The clients are configured
    not to use the VPN as the default gateway. This way, the clients only route
    packets to 192.168.1.0/255.255.255.0 to the VPN server. "Normal" internet
    packets get routed via their normal dial-up interfaces. How do I get the
    clients to route also packets targetting 192.168.0.0/255.255.255.0 to the
    VPN server, without setting the VPN server as the default gateway? I tried
    to create a route manualy:

    route add 192.168.0.0 MASK 255.255.255.0 192.168.1.42

    This worked, but this way the user would need to setup the route manualy on
    every reboot, even on every reconnect (because he wont get 192.168.1.42
    every time). How can I archive the same result automatically, maybe without
    any special configuration on the client, but only on the server? There is
    also a DHCP server available, which at moment serves the local clients in
    the intranet.


    Thanks in advance
    Alexander Gräf
    ______________________________________
    Milano Medien GmbH
    Hanauer Landstr. 196A
    60314 Frankfurt / Main
    http://milanomedien.com
     
    Alexander Gräf, Jan 5, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.