SBS2K3 Premium - SP1 Issues, Fax Issues

Discussion in 'Windows Small Business Server' started by Eddie Schenk, Sep 19, 2005.

  1. Eddie Schenk

    Eddie Schenk Guest

    Folks,

    I obtained the SP1 disk set from MS and haave installed them today with the
    exception of the ISA upgrade, a few issues cropped up along the way which I
    hope some kind soul can shead some light on.

    1) The Fax server no longer sends the recieved faxes to the designated email
    address, if I try and send it manually from the Fax console it give me an
    invalid DLL error.

    2) After installing the Windows 2003 SP1 and re-booting I got a weird error
    message stating that the current windowns configuration could not be loaded
    and that a previous version would be used instead.

    3) After the XP SP2 install (which went fine) I tried to install the SBS2K3
    SP1 and this kept looping (6 times before I killed it off), I then re-booted
    and found the "Continue setup" icon on the desktop, I tried to install it
    again and it failed half way through and asked if I wanted to check the log
    file, I did this and the log files did not show any error. After this the
    finished box appeared and I re-booted, the "continue setup" icon has
    disapeared. Dispite two more attempts to install this SP the same thing
    happened each time. Add/Remove programs confirmed that the SP had been
    installed.

    Has anyone else come accross this? I am thinking the best way to procede
    would be to un-install all the service packs and start again? I did not
    install the Exchange SP1 as I had already installed this previously. This
    server also has SQL2K installed with SP4 and CRM 1.2
     
    Eddie Schenk, Sep 19, 2005
    #1
    1. Advertisements

  2. Eddie Schenk

    Crina Li Guest

    Hi Eddie,

    Thank you for posting in SBS newsgroup.

    Before we install the SBS 2003 SP1 onto the server, we need to make sure
    that the required components such as Windows server 2003 SP1, Exchange 2003
    SP1, WSS SP1 have been installed. Please refer to the release note and
    double check the install procedure:
    http://www.microsoft.com/downloads/details.aspx?FamilyId=022677CC-F5AC-4BFB-
    9AD0-454E89CB98BB&displaylang=en

    Would you please help me confirm if you have strictly followed the document
    to install SBS SP1?

    For SBS 2003 Premium:
    http://download.microsoft.com/download/2/e/9/2e902d14-da2e-43ba-8bd6-6d258f5
    356b6/SP1Setup_prem.htm

    More reference:
    http://www.smallbizserver.net/Default.aspx?tabid=236

    If the problem persists, please help to gather the following information to
    isolate the problem:

    1. Do you have received the prompt box which indicated the operation has
    been finished successfully?
    2. Do you see "Microsoft Windows Server 2003 for Small Business Server
    Service Pack 1" when you view properties of My Computer?
    3. Also, please paste all the content of log in the following folders to
    the Newsgroup. If the file is too large, you can zip it and send it to my
    mailbox: . I need the whole content in the folder for
    research.

    Windows Small Business Server 2003 SP1 (Q885918):
    C:\Windows\KB885918.log
    Remainder of the Small Business Server Setup Logs: C:\Program
    Files\Microsoft Integration\Windows Small Business Server 2003\Logs

    I am appreciated your time and cooperation. If anything is unclear, please
    feel free to let me know. I am looking forward to hearing from you!

    Best regards,

    Crina Li (MSFT)

    Microsoft CSS Online Newsgroup Support

    Get Secure! - www.microsoft.com/security

    =====================================================
    This newsgroup only focuses on SBS technical issues. If you have issues
    regarding other Microsoft products, you'd better post in the corresponding
    newsgroups so that they can be resolved in an efficient and timely manner.
    You can locate the newsgroup here:
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

    When opening a new thread via the web interface, we recommend you check the
    "Notify me of replies" box to receive e-mail notifications when there are
    any updates in your thread. When responding to posts via your newsreader,
    please "Reply to Group" so that others may learn and benefit from your
    issue.

    Microsoft engineers can only focus on one issue per thread. Although we
    provide other information for your reference, we recommend you post
    different incidents in different threads to keep the thread clean. In doing
    so, it will ensure your issues are resolved in a timely manner.

    For urgent issues, you may want to contact Microsoft CSS directly. Please
    check http://support.microsoft.com for regional support phone numbers.

    Any input or comments in this thread are highly appreciated.

    =====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    --------------------
    | Thread-Topic: SBS2K3 Premium - SP1 Issues, Fax Issues
    | t| From: =?Utf-8?B?RWRkaWUgU2NoZW5r?=
    <>
    | Subject: SBS2K3 Premium - SP1 Issues, Fax Issues
    | Date: Mon, 19 Sep 2005 11:43:04 -0700
    | | Newsgroups: microsoft.public.windows.server.sbs
    ||
    | Folks,
    |
    | I obtained the SP1 disk set from MS and haave installed them today with
    the
    | exception of the ISA upgrade, a few issues cropped up along the way which
    I
    | hope some kind soul can shead some light on.
    |
    | 1) The Fax server no longer sends the recieved faxes to the designated
    email
    | address, if I try and send it manually from the Fax console it give me an
    | invalid DLL error.
    |
    | 2) After installing the Windows 2003 SP1 and re-booting I got a weird
    error
    | message stating that the current windowns configuration could not be
    loaded
    | and that a previous version would be used instead.
    |
    | 3) After the XP SP2 install (which went fine) I tried to install the
    SBS2K3
    | SP1 and this kept looping (6 times before I killed it off), I then
    re-booted
    | and found the "Continue setup" icon on the desktop, I tried to install
    it
    | again and it failed half way through and asked if I wanted to check the
    log
    | file, I did this and the log files did not show any error. After this
    the
    | finished box appeared and I re-booted, the "continue setup" icon has
    | disapeared. Dispite two more attempts to install this SP the same thing
    | happened each time. Add/Remove programs confirmed that the SP had been
    | installed.
    |
    | Has anyone else come accross this? I am thinking the best way to procede
    | would be to un-install all the service packs and start again? I did not
    | install the Exchange SP1 as I had already installed this previously. This
    | server also has SQL2K installed with SP4 and CRM 1.2
    | --
    | Cheers
    |
    | Eddie Schenk
    |
     
    Crina Li, Sep 20, 2005
    #2
    1. Advertisements

  3. Eddie Schenk

    Eddie Schenk Guest

    Hi Crina,

    I haave sent the log files you requested via email as there a quite a lot of
    them and it would be messy to post them here, as to your questions please
    find the anwsers below:

    1) Yes, I have installed the Service Packs in the order they are supplied on
    the three CDs, I did not apply the Exchange one as I had already installed
    that, should I have re-installed it?

    2) I got the message the SBS2K3 SP1 had installed and required a re-boot
    only after the installation filed half way through and asked that I look at
    the log file and reapir whatever was causing the problem, but the elog file
    did not say that anythinig had failed. After closing the log file the
    Finished Box appeared and the machine was re-booted.

    Having said all that, the SBS SP1 was in a loop asa per my first posting
    which I had to kill off after the 6th loop and thtere is the issue after the
    Windows 2003 SP1 was installed saying that the normala configuration could
    not be used and that a previous one would be used instead.

    3) The machine reports that the SBS SP1 is installed under My Computer.

    The only indication so far that all is not as expected is that the fax to
    email is not working and it reports that the DLLs are invalid. But I ama not
    happy thata the SBS SP1 in the first instant looped and then failed half way
    through and then appeared to complete, plus the error on the Windows 2003 SP1
    install.

    I have seen another post in this Forum that made the recomendation that the
    SP be removed and then installed again, I will be back ono the Customer's
    site this Thursday and I would like to know how best to procede, perhaps the
    log files will give you some extra clues?

    Cheers

    Eddie Schenk
     
    Eddie Schenk, Sep 20, 2005
    #3
  4. Eddie Schenk

    Crina Li Guest

    Hi Eddie,

    Thanks for your reply.

    From these files you have send to me, I find the SBS SP1 should have been
    installed successfully. You can check if SBS 2003 SP1 is installed through
    taking a look at this registry key:

    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SmallBusinessServer\ServicePackNumber

    It should be set to "1" if the server is at SP1.

    In addition, you may check what SP level the following components are at by
    using the steps respectively:

    - Windows Server 2003: Right-click on My Computer and choose Properties; or
    run "winver".

    - Exchange Server 2003: Click Start -> All Programs -> Microsoft Exchange
    -> System Manager, expand Servers, right-click on servername and choose
    Properties.

    - SQL Server 2000: Click Start -> All Programs -> Microsoft SQL Server ->
    Enterprise Manager, right-click servername under SQL Server group and
    choose Properties.

    Regarding the fax problem, can I assume that when you right-click the FAX
    and choose ''Mail to'', you will get an error "Mail system DLL is invalid"?
    If so, it should be a normal behavior in SBS 2003 server. This is because
    after the Exchange server is installed on the server box, the mapi32.dll
    will be replaced with an Exchange version. This mapi32.dll does not support
    the mail to function. We always use this ''Mail to'' function on client
    site.

    Please try the following steps to see if the problem can be worked around:

    1. Rename Mapi32.dll (the Exchange Server version) in \windows\system32 to
    mapi32x.dll.
    2. Rename the mapistub.dll in \windows\system32 to mapi32.dll.
    3. Now when you open the Fax Console, right click a Fax, and select "Mail
    To", Outlook Express is invoked and we can use this send the fax manually
    from the server.

    Another workaround is to manually route faxes from a client machine or from
    another server machine that does not have Exchange 2003 installed.

    You may also need to confirm if you have installed the Outlook on the SBS?
    If you have, this may cause the issue. SBS is not recommended to have
    Outlook install. Please uninstall the Outlook and then test to see if the
    issue exists. See:

    828050 You Receive a Warning Message or You Cannot Start Outlook on a
    Computer
    http://support.microsoft.com/?id=828050

    Regarding the error after you installed the windows 2003 SP1, would you
    please send the svcpack.log to me?

    Thanks for your time and I look forward to your reply.

    Best regards,

    Crina Li (MSFT)

    Microsoft CSS Online Newsgroup Support

    Get Secure! - www.microsoft.com/security

    =====================================================
    This newsgroup only focuses on SBS technical issues. If you have issues
    regarding other Microsoft products, you'd better post in the corresponding
    newsgroups so that they can be resolved in an efficient and timely manner.
    You can locate the newsgroup here:
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

    When opening a new thread via the web interface, we recommend you check the
    "Notify me of replies" box to receive e-mail notifications when there are
    any updates in your thread. When responding to posts via your newsreader,
    please "Reply to Group" so that others may learn and benefit from your
    issue.

    Microsoft engineers can only focus on one issue per thread. Although we
    provide other information for your reference, we recommend you post
    different incidents in different threads to keep the thread clean. In doing
    so, it will ensure your issues are resolved in a timely manner.

    For urgent issues, you may want to contact Microsoft CSS directly. Please
    check http://support.microsoft.com for regional support phone numbers.

    Any input or comments in this thread are highly appreciated.

    =====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    --------------------
    | Thread-Topic: SBS2K3 Premium - SP1 Issues, Fax Issues
    | | From: =?Utf-8?B?RWRkaWUgU2NoZW5r?=
    <>
    | | Subject: RE: SBS2K3 Premium - SP1 Issues, Fax Issues
    | Date: Tue, 20 Sep 2005 04:14:03 -0700
    | | Newsgroups: microsoft.public.windows.server.sbs
    | |
    | Hi Crina,
    |
    | I haave sent the log files you requested via email as there a quite a lot
    of
    | them and it would be messy to post them here, as to your questions
    please
    | find the anwsers below:
    |
    | 1) Yes, I have installed the Service Packs in the order they are supplied
    on
    | the three CDs, I did not apply the Exchange one as I had already
    installed
    | that, should I have re-installed it?
    |
    | 2) I got the message the SBS2K3 SP1 had installed and required a re-boot
    | only after the installation filed half way through and asked that I look
    at
    | the log file and reapir whatever was causing the problem, but the elog
    file
    | did not say that anythinig had failed. After closing the log file the
    | Finished Box appeared and the machine was re-booted.
    |
    | Having said all that, the SBS SP1 was in a loop asa per my first posting
    | which I had to kill off after the 6th loop and thtere is the issue after
    the
    | Windows 2003 SP1 was installed saying that the normala configuration
    could
    | not be used and that a previous one would be used instead.
    |
    | 3) The machine reports that the SBS SP1 is installed under My Computer.
    |
    | The only indication so far that all is not as expected is that the fax to
    | email is not working and it reports that the DLLs are invalid. But I ama
    not
    | happy thata the SBS SP1 in the first instant looped and then failed half
    way
    | through and then appeared to complete, plus the error on the Windows 2003
    SP1
    | install.
    |
    | I have seen another post in this Forum that made the recomendation that
    the
    | SP be removed and then installed again, I will be back ono the Customer's
    | site this Thursday and I would like to know how best to procede, perhaps
    the
    | log files will give you some extra clues?
    |
    | Cheers
    |
    | Eddie Schenk
    |
    |
    |
     
    Crina Li, Sep 21, 2005
    #4
  5. Eddie Schenk

    Eddie Schenk Guest

    Hi Crina,

    Thank you for the responses fo far, I presume you recieved the log files I
    sent over via email and have managed to review them including the one I sent
    today containing the svcpack.log.

    As to your questions the anwsers are as follows:

    The Registry Key shows "1" so the SBS SP1 should be installed.

    Properites of "My Conputer" shows "Microsoft Windows Server 2003 for Small
    Business Server Service Pack 1"

    Winver shows the following: "Version 5.2 (Build
    3790.srv03_sp1_rtm.050324-1447 : Service Pack 1)

    Exchange & SQL are at the correct Service Pack levels.

    I still have the ISA 2004 upgrade to do, thanks for the heads up on the Fax
    situation, I did not realise that you could not do the right click and send
    to email option once Exchange had been installed.

    Presumably this will not effect the normal operation of the Fax service
    sending recieved Faxes out via email?
     
    Eddie Schenk, Sep 21, 2005
    #5
  6. Eddie Schenk

    Crina Li Guest

    Hi Eddie,

    Thanks for your reply.

    I have analyzed the files you have send to me and compared the error which
    listed in the files with a good installation. There are no particular
    errors. So you should have installed the SBS SP1 successfully.

    Regarding the error after you installed the windows 2003 SP1, I think it
    may be caused by some third party services or Antivirus software. As I
    know, in the installation process, there may be some configuration has not
    been updated and synchronized. After reboot, it may cover the old
    configuration.

    Regarding the fax problem, as I know, this will not effect the normal
    operation of the Fax service sending received Faxes out via email.

    Hope the information help and I look forward to hearing from you!

    Best regards,

    Crina Li (MSFT)

    Microsoft CSS Online Newsgroup Support

    Get Secure! - www.microsoft.com/security

    =====================================================
    This newsgroup only focuses on SBS technical issues. If you have issues
    regarding other Microsoft products, you'd better post in the corresponding
    newsgroups so that they can be resolved in an efficient and timely manner.
    You can locate the newsgroup here:
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

    When opening a new thread via the web interface, we recommend you check the
    "Notify me of replies" box to receive e-mail notifications when there are
    any updates in your thread. When responding to posts via your newsreader,
    please "Reply to Group" so that others may learn and benefit from your
    issue.

    Microsoft engineers can only focus on one issue per thread. Although we
    provide other information for your reference, we recommend you post
    different incidents in different threads to keep the thread clean. In doing
    so, it will ensure your issues are resolved in a timely manner.

    For urgent issues, you may want to contact Microsoft CSS directly. Please
    check http://support.microsoft.com for regional support phone numbers.

    Any input or comments in this thread are highly appreciated.

    =====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    --------------------
    | Thread-Topic: SBS2K3 Premium - SP1 Issues, Fax Issues
    || From: =?Utf-8?B?RWRkaWUgU2NoZW5r?=
    <>

    | Subject: RE: SBS2K3 Premium - SP1 Issues, Fax Issues
    | Date: Wed, 21 Sep 2005 06:41:11 -0700
    | | Newsgroups: microsoft.public.windows.server.sbs
    | |
    | Hi Crina,
    |
    | Thank you for the responses fo far, I presume you recieved the log files
    I
    | sent over via email and have managed to review them including the one I
    sent
    | today containing the svcpack.log.
    |
    | As to your questions the anwsers are as follows:
    |
    | The Registry Key shows "1" so the SBS SP1 should be installed.
    |
    | Properites of "My Conputer" shows "Microsoft Windows Server 2003 for
    Small
    | Business Server Service Pack 1"
    |
    | Winver shows the following: "Version 5.2 (Build
    | 3790.srv03_sp1_rtm.050324-1447 : Service Pack 1)
    |
    | Exchange & SQL are at the correct Service Pack levels.
    |
    | I still have the ISA 2004 upgrade to do, thanks for the heads up on the
    Fax
    | situation, I did not realise that you could not do the right click and
    send
    | to email option once Exchange had been installed.
    |
    | Presumably this will not effect the normal operation of the Fax service
    | sending recieved Faxes out via email?
    |
    | --
    | Cheers
    |
    | Eddie Schenk
    |
    |
    | ""Crina Li"" wrote:
    |
    | > Hi Eddie,
    | >
    | > Thanks for your reply.
    | >
    | > From these files you have send to me, I find the SBS SP1 should have
    been
    | > installed successfully. You can check if SBS 2003 SP1 is installed
    through
    | > taking a look at this registry key:
    | >
    | >
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SmallBusinessServer\ServicePackNumber
    | >
    | > It should be set to "1" if the server is at SP1.
    | >
    | > In addition, you may check what SP level the following components are
    at by
    | > using the steps respectively:
    | >
    | > - Windows Server 2003: Right-click on My Computer and choose
    Properties; or
    | > run "winver".
    | >
    | > - Exchange Server 2003: Click Start -> All Programs -> Microsoft
    Exchange
    | > -> System Manager, expand Servers, right-click on servername and choose
    | > Properties.
    | >
    | > - SQL Server 2000: Click Start -> All Programs -> Microsoft SQL Server
    ->
    | > Enterprise Manager, right-click servername under SQL Server group and
    | > choose Properties.
    | >
    | > Regarding the fax problem, can I assume that when you right-click the
    FAX
    | > and choose ''Mail to'', you will get an error "Mail system DLL is
    invalid"?
    | > If so, it should be a normal behavior in SBS 2003 server. This is
    because
    | > after the Exchange server is installed on the server box, the
    mapi32.dll
    | > will be replaced with an Exchange version. This mapi32.dll does not
    support
    | > the mail to function. We always use this ''Mail to'' function on client
    | > site.
    | >
    | > Please try the following steps to see if the problem can be worked
    around:
    | >
    | > 1. Rename Mapi32.dll (the Exchange Server version) in \windows\system32
    to
    | > mapi32x.dll.
    | > 2. Rename the mapistub.dll in \windows\system32 to mapi32.dll.
    | > 3. Now when you open the Fax Console, right click a Fax, and select
    "Mail
    | > To", Outlook Express is invoked and we can use this send the fax
    manually
    | > from the server.
    | >
    | > Another workaround is to manually route faxes from a client machine or
    from
    | > another server machine that does not have Exchange 2003 installed.
    | >
    | > You may also need to confirm if you have installed the Outlook on the
    SBS?
    | > If you have, this may cause the issue. SBS is not recommended to have
    | > Outlook install. Please uninstall the Outlook and then test to see if
    the
    | > issue exists. See:
    | >
    | > 828050 You Receive a Warning Message or You Cannot Start Outlook on a
    | > Computer
    | > http://support.microsoft.com/?id=828050
    | >
    | > Regarding the error after you installed the windows 2003 SP1, would you
    | > please send the svcpack.log to me?
    | >
    | > Thanks for your time and I look forward to your reply.
    | >
    | > Best regards,
    | >
    | > Crina Li (MSFT)
    | >
    | > Microsoft CSS Online Newsgroup Support
    | >
    | > Get Secure! - www.microsoft.com/security
    | >
    | > =====================================================
    | > This newsgroup only focuses on SBS technical issues. If you have issues
    | > regarding other Microsoft products, you'd better post in the
    corresponding
    | > newsgroups so that they can be resolved in an efficient and timely
    manner.
    | > You can locate the newsgroup here:
    | > http://www.microsoft.com/communities/newsgroups/en-us/default.aspx
    | >
    | > When opening a new thread via the web interface, we recommend you check
    the
    | > "Notify me of replies" box to receive e-mail notifications when there
    are
    | > any updates in your thread. When responding to posts via your
    newsreader,
    | > please "Reply to Group" so that others may learn and benefit from your
    | > issue.
    | >
    | > Microsoft engineers can only focus on one issue per thread. Although we
    | > provide other information for your reference, we recommend you post
    | > different incidents in different threads to keep the thread clean. In
    doing
    | > so, it will ensure your issues are resolved in a timely manner.
    | >
    | > For urgent issues, you may want to contact Microsoft CSS directly.
    Please
    | > check http://support.microsoft.com for regional support phone numbers.
    | >
    | > Any input or comments in this thread are highly appreciated.
    | >
    | > =====================================================
    | >
    | > This posting is provided "AS IS" with no warranties, and confers no
    rights.
    | > --------------------
    | > | Thread-Topic: SBS2K3 Premium - SP1 Issues, Fax Issues
    | > | | From: =?Utf-8?B?RWRkaWUgU2NoZW5r?=
    | > <>
    | > | | Subject: RE: SBS2K3 Premium - SP1 Issues, Fax Issues
    | > | Date: Tue, 20 Sep 2005 04:14:03 -0700
    | > | | Newsgroups: microsoft.public.windows.server.sbs
    | > | |
    | > | Hi Crina,
    | > |
    | > | I haave sent the log files you requested via email as there a quite a
    lot
    | > of
    | > | them and it would be messy to post them here, as to your questions
    | > please
    | > | find the anwsers below:
    | > |
    | > | 1) Yes, I have installed the Service Packs in the order they are
    supplied
    | > on
    | > | the three CDs, I did not apply the Exchange one as I had already
    | > installed
    | > | that, should I have re-installed it?
    | > |
    | > | 2) I got the message the SBS2K3 SP1 had installed and required a
    re-boot
    | > | only after the installation filed half way through and asked that I
    look
    | > at
    | > | the log file and reapir whatever was causing the problem, but the
    elog
    | > file
    | > | did not say that anythinig had failed. After closing the log file the
    | > | Finished Box appeared and the machine was re-booted.
    | > |
    | > | Having said all that, the SBS SP1 was in a loop asa per my first
    posting
    | > | which I had to kill off after the 6th loop and thtere is the issue
    after
    | > the
    | > | Windows 2003 SP1 was installed saying that the normala configuration
    | > could
    | > | not be used and that a previous one would be used instead.
    | > |
    | > | 3) The machine reports that the SBS SP1 is installed under My
    Computer.
    | > |
    | > | The only indication so far that all is not as expected is that the
    fax to
    | > | email is not working and it reports that the DLLs are invalid. But I
    ama
    | > not
    | > | happy thata the SBS SP1 in the first instant looped and then failed
    half
    | > way
    | > | through and then appeared to complete, plus the error on the Windows
    2003
    | > SP1
    | > | install.
    | > |
    | > | I have seen another post in this Forum that made the recomendation
    that
    | > the
    | > | SP be removed and then installed again, I will be back ono the
    Customer's
    | > | site this Thursday and I would like to know how best to procede,
    perhaps
    | > the
    | > | log files will give you some extra clues?
    | > |
    | > | Cheers
    | > |
    | > | Eddie Schenk
    | > |
    | > |
    | > |
    | >
    | >
    |
     
    Crina Li, Sep 22, 2005
    #6
  7. Eddie Schenk

    Eddie Schenk Guest

    Hi Crina,

    Thanks for the update, the server appears to be running fine so based on
    what you have seen from the log files on the error after the Windows 2003 SP1
    install I should not be worried for the long term?

    I tried the upgrade to ISA2004 today and this threw up a number os issues
    which I have posted aas a new message.
     
    Eddie Schenk, Sep 22, 2005
    #7
  8. Eddie Schenk

    Crina Li Guest

    Hi Eddie,

    Thanks for your reply.

    From the current situation and the logs, I think the system should be able
    to work normally for the long time.

    Thanks for your time and I look forward to your reply.

    Best regards,

    Crina Li (MSFT)

    Microsoft CSS Online Newsgroup Support

    Get Secure! - www.microsoft.com/security

    =====================================================
    This newsgroup only focuses on SBS technical issues. If you have issues
    regarding other Microsoft products, you'd better post in the corresponding
    newsgroups so that they can be resolved in an efficient and timely manner.
    You can locate the newsgroup here:
    http://www.microsoft.com/communities/newsgroups/en-us/default.aspx

    When opening a new thread via the web interface, we recommend you check the
    "Notify me of replies" box to receive e-mail notifications when there are
    any updates in your thread. When responding to posts via your newsreader,
    please "Reply to Group" so that others may learn and benefit from your
    issue.

    Microsoft engineers can only focus on one issue per thread. Although we
    provide other information for your reference, we recommend you post
    different incidents in different threads to keep the thread clean. In doing
    so, it will ensure your issues are resolved in a timely manner.

    For urgent issues, you may want to contact Microsoft CSS directly. Please
    check http://support.microsoft.com for regional support phone numbers.

    Any input or comments in this thread are highly appreciated.

    =====================================================

    This posting is provided "AS IS" with no warranties, and confers no rights.
    --------------------
    | Thread-Topic: SBS2K3 Premium - SP1 Issues, Fax Issues
    || From: =?Utf-8?B?RWRkaWUgU2NoZW5r?=
    <>
    || Subject: RE: SBS2K3 Premium - SP1 Issues, Fax Issues
    | Date: Thu, 22 Sep 2005 15:19:05 -0700
    | | Newsgroups: microsoft.public.windows.server.sbs
    ||
    | Hi Crina,
    |
    | Thanks for the update, the server appears to be running fine so based on
    | what you have seen from the log files on the error after the Windows 2003
    SP1
    | install I should not be worried for the long term?
    |
    | I tried the upgrade to ISA2004 today and this threw up a number os issues
    | which I have posted aas a new message.
    | --
    | Cheers
    |
    | Eddie Schenk
    |
    |
     
    Crina Li, Sep 23, 2005
    #8
  9. Eddie Schenk

    maccadiamond Guest

    maccadiamond, Apr 9, 2008
    #9
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.