Solution for W2k3 SP1 0x00000051 error on Dell PowerEdge Server

Discussion in 'Windows Server' started by LThibx, Apr 28, 2005.

  1. LThibx

    LThibx Guest

    I thought I would share my solution to this problem.
    I too received the 0x51 error after applying W2k3 SP1 to a newly setup Dell
    PowerEdge 2850 server.

    Dell does have a fix for this, If you have already installed SP1 and are
    receiving the 0x51 error. The link is:
    http://support.dell.com/support/top...kb/en/document?dn=1092326&c=us&l=en&s=gen&cs=

    Also, there is a patch that can be installed prior to installing SP1 to
    prevent this situation. (My situation was post SP1 installation, so I cannot
    verify this solution). The link is:
    http://support.dell.com/support/downloads/format.aspx?releaseid=R98878&c=us&l=en&s=gen&cs=

    Alternately, you can go to support.dell.com and search Technical Support for
    'regfix' or 'regprep'.

    I hope this information is useful in solving your issue.
     
    LThibx, Apr 28, 2005
    #1

    1. Advertisements

  2. LThibx

    Rob R. Ainscough Guest

    Good to know, but I find it hard that MS didn't test SP1 on a Dell. Dell's
    are pretty common servers.
     
    Rob R. Ainscough, Apr 29, 2005
    #2

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. BSOD XP Registry Error STOP: 0x00000051

  2. Windows 2003 SP1 on a DC DELL PowerEdge 1750

  3. More then 4GB of RAM on Win2k3 SP1 on Dell Poweredge 2800

  4. dell poweredge 800, SP1 & dual processors

  5. SP1 and Dell PowerEdge 1800 Server

  6. SBS 2K3 Premium-SP1 -Dell PowerEdge 1800-Install Open Manage Suite; or not?

  7. Can Dell PowerEdge Server be Upgraded to SP1

  8. RIS/RIPREP Image problem with Dell Poweredge 2950 - W2k3 SP2

Loading...