Trying to connect inside network and DMZ to the same server?

Discussion in 'Server Networking' started by Mike, Jan 30, 2012.

  1. Mike

    Mike Guest

    Hi,

    I have a Dell box that has a four port NIC card. I have one port connected
    to my internal switch and that's working fine. Now I'm trying to connect
    a second port of the four-port NIC card to my DMZ. I'm running Hyper-V
    on this box and so far that's worked fine. All my guests/VMs connect to
    the internal network just fine. I've gone through the Virtual Network
    Manager and assigned a new guest/VM to connect to the DMZ. It doesn't. I
    have an IP address assigned to the guest in the DMZ. I have an IP address
    assigned to the Hyper-V server for it's connection in the DMZ. In the
    status for this network connection I see incrementing packets sent,
    but none received.

    What is preventing the connection to the DMZ?

    Mike

    Microsoft Server 2008 R2
     
    Mike, Jan 30, 2012
    #1
    1. Advertisements

  2. Mike

    Mike Guest

    Turns out something either in Hyper-V or on the box decided the next
    port, port 3, is not the port I think it is. I moved the DMZ network
    cable around and found a port that is working.

    This is fixed.

    Mike
     
    Mike, Feb 1, 2012
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.