Unable to Pend IRP on ISO Read (IN) pipe

Discussion in 'Windows Vista Drivers' started by Kabir, Apr 28, 2008.

  1. Kabir

    Kabir Guest

    I need to pend an IRP on the ISO IN pipe with a completion routine, which
    will get invoked when the driver below (USB) has some data on the pipe. My
    problem is that i have been unable to pend an IRP (Created using
    IoAllocateIrp) on the ISO read (IN) pipe. I have tried with the sample
    provided in DDK (\WinDDK\6000\src\usb\isousb\sys) as well as the sample
    provided by Walter Oney (\Samples\Chap12\usbiso\sys).

    I am using the alternate setting number 5 provide by my device on interface
    1, wherein the maximum packet size is 0x33 (51) bytes.

    Whenever i call to IoCallDriver to send the IRP to the next driver below, i
    get a failure with code 0xC000000D(STATUS_INVALID_PARAMETER). If at all the
    call returns STATUS_PENDING, the completion routine for the sub IRP's is
    getting called.

    Any help in this regard will be great.

    Thanks in advance.
     
    Kabir, Apr 28, 2008
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.