Vista 5308 domain logon over wireless

Discussion in 'Windows Vista Networking' started by Paul J. Melia, Mar 10, 2006.

  1. I successfully(?) installed 5308 on my main workstation the other night, got
    my wirless adapter working and set up the IPv4 properties as I usually do
    for other computers on my network (static, unique IP; gateway set to my
    wireless ADSL router; DNS set to my PDC) and quite happily joined the
    domain.

    I can ping other machines on the network from the Vista installation and
    ping the Vista installation from other machines; I can look up AD
    information on the PDC from the Vista installation and add domain user
    accounts to local groups on the Vista installation with no problem. The
    registration of the machine account looks okay in AD and DNS.

    I've disabled the Windows firewall and stopped and disabled the firewall
    service, but when I log off the local account and try to log in as domain
    account I have no joy: instead I get a message saying that no logon servers
    exist for the current domain (the machine account looks to have been created
    okay in AD). Trying to ping the Vista machine when no user is logged in to
    it times out. Am I right in assuming that when no one is logged in Vista has
    disconnected from the wireless network? If so is there something I can do to
    get arround this, if not can anyone suggest any other reason why I might not
    be able to logon to the domain?

    Ta
     
    Paul J. Melia, Mar 10, 2006
    #1
    1. Advertisements

  2. It could well be the server... they still haven't got networking fully
    sorted out yet - I've got my machine on a seperate workgroup because I can't
    stick mine on the domain at home either :eek:(

    --
    Zack Whittaker
    Microsoft Beta (Windows Server R2 Beta Mentor)
    » ZackNET Enterprises: www.zacknet.co.uk
    » MSBlog on ResDev: http://msblog.resdev.net
    » ZackNET Forum: www.zacknet.co.uk/forum
    » VistaBase: www.zacknet.co.uk/vistabase
    » This mailing is provided "as is" with no warranties, and confers no
    rights. All opinions expressed are those of myself unless stated so, and not
    of my employer, best friend, mother or cat. Let's be clear on that one!


    --- Original message follows ---
     
    Zack Whittaker \(R2 Mentor\), Mar 10, 2006
    #2
    1. Advertisements

  3. Paul,

    I'm assuming that you have joined the Vista client to a W2K3 domain and the
    machine has been rebooted etc.

    Yes, one possibility is that wireless turns off when noone is logged in. To
    check this, you can login in the local account, from a command prompt try
    running this - runas /user:<domain/username> cmd - this should prompt you
    for the username password and new command prompt with domain username cred
    should start up. If this works fine, then it could be a wireless issue.

    Other thing to do would be to capture any network traffic from the client
    while you are trying to logon - if the wireless is turned on, then there
    should be some network traffic and it might be point to some failure.

    Thanks ~
    Prashanth
     
    Prashanth Prahalad, Mar 10, 2006
    #3
  4. Paul J. Melia

    Paul J.Melia Guest

    Prashanth,

    I've done the check as you suggested, and had no problem starting a new
    command prompt as the domain account. There must be something going on with
    the WLAN when no one is logged in as the Vista box can't be pinged. Network
    connectivity is fine when I'm logged into Vista: I'm remotting into the PDC
    from Vista (logged in as a local user and supplying creds when prompted) at
    the moment to check the AD and DNS setup. Looks like the WLAN connection is
    only established when you login?

    Paul.
     
    Paul J.Melia, Mar 10, 2006
    #4
  5. Thanks Prashanth,

    Tried the command prompt trick: no problem, get a new command prompt running
    under the domain user creds.

    Vista must be disconnecting from the WLAN when no-one is logged on as the
    Vista box is pingable when someone is logged in. Network connectivity is
    fine otherwise: I'm posting this from an RDP session into the PDC (logged
    into Vista using a local account and providing creds as prompted) as Vista's
    windows mail is not happy about posting (something for a post elsewhere I
    think :))

    Cheers,

    Paul
     
    Paul J. Melia, Mar 10, 2006
    #5
  6. Paul J. Melia

    Paul J.Melia Guest

    Not sure exactly how this started working, but I tried to log in to the
    domain this morning and got in! Logged out again and then logged back in
    locally, noticed that Vista has lost the connection to my WLAN, re-connected
    and noticed a check-box on the connection dialog "make this connection
    available to other users of this computer", checked that and now everything
    is okay!!!

    Thanks for your comments,

    Paul
     
    Paul J.Melia, Mar 11, 2006
    #6
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.