Vista does not recognize dvd burner in DVD maker or media center?

Discussion in 'Windows Vista Hardware' started by avdog, Feb 24, 2007.

  1. avdog

    avdog Guest

    I have an asus DRW 1612BL Drive: I see other people are having the same
    problem but cannot find a answer anyware?
     
    avdog, Feb 24, 2007
    #1
    1. Advertisements

  2. Double check and reseat all connections.
    Verify the jumper settings are correct on all devices on the same channel as
    DVD drive.
    What does ASUS say about Vista compatibility?
     
    Jupiter Jones [MVP], Feb 24, 2007
    #2
    1. Advertisements

  3. avdog

    avdog Guest

     
    avdog, Feb 25, 2007
    #3
  4. avdog

    avdog Guest

    The burner works with other software just not vista programs?
     
    avdog, Feb 25, 2007
    #4
  5. avdog

    Clark Guest

    What does device manager show for the drive. I had 2 drives that
    disappeared one day. The device manager showed a yellow (gold) circle next
    to them. They worked fine in XP, so it had to be something with the Vista
    install. It turned out the Upper Filter Lower Filter fix solved the problem
    and the drives were visible again. Some other piece of software must have
    put those entries in the registry.

    http://support.microsoft.com/kb/314060/en-us

    Clark
     
    Clark, Feb 26, 2007
    #5
  6. avdog

    avdog Guest

    everything is fine in the device manager no errors. Drives work with Nero
    and other programs just Vista does not work???????????????
     
    avdog, Feb 26, 2007
    #6
  7. avdog

    John Pasley Guest

    I'm having the same issue will all 3 of my burners. 2 are Plextors and 1 is
    an NEC/Sony. Ashampoo works as advertised but burning within Vista does not.
    I'm always told my blank media needs formatting but can't be formatted.
     
    John Pasley, Feb 27, 2007
    #7
  8. avdog

    Lomax Guest

    The problem is with the driver for the JMicro IDE controller.

    Out of the box, Vista uses a standard microsoft driver for the JM36x
    IDE controller and all works fine. A few weeks ago, JMicro released a
    driver that came through auto updates - this driver is screwy and
    causes your dvd burner to no longer be seen as a burner by windows.

    Go to Device Manager, and look at the properties for your JM36x IDE
    controller. You need to roll this back to the generic microsoft one.
    You should be able to click "Rollback Driver" on the properties screen.
     
    Lomax, Apr 1, 2007
    #8
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.