Vista Install error 0x80070003

Discussion in 'Windows Vista Installation' started by sandersoft, Oct 8, 2006.

  1. sandersoft

    sandersoft Guest

    I Used the new windows Vista Build 5744 (rc2), but I have a probleme with the
    installation.
    I did a clean installation.
    The first step of the installation does normal (Copying files)
    The second step (expanding files) goes to 26% and then crash
    with a message:
    Windows cannot install required files. The file does not exist. Make sure
    all files required for installation are available, and restart the
    installation. Error code: 0x80070003.

    I have same problem with beta2 rc1 5728 Build.


    Then I reset my computer and go to the bios and my Hard Drive is gone.
    Then I shutdown my pc en hard drive is back. I install Windows XP
    Professional SP2 again and runs normal wit no errors during setup.
    My iso file is not corrupt, I did a md5 check
    Is there a solution for this problem?

    These are my computer spefications:
    AMD Athlon XP 2000+ (1,67 GHZ)
    512 MB RAM DDR400
    Maxtor Diamondmax10 200GB IDE Hard Drive
    MSI Geforce 6800LE graphics card 128MB WDDM-Support
    Mainboard ASUS a7v880
    Soundblaster Audigy SE
     
    sandersoft, Oct 8, 2006
    #1
    1. Advertisements

  2. sandersoft

    Vanda Guest

    I had same problem, and I found out that it was an reading error on the dvd i
    burned.
    I made a new one at 2x speed and the installation went fine
     
    Vanda, Oct 8, 2006
    #2
    1. Advertisements

  3. sandersoft

    sandersoft Guest

    i have try three ways to install vista
    1. i have unpacked the iso files to my hard drive and then install
    vista(same problem)
    2. i have burned at the lowest speed (same problem)
    3. i build my hard drive out and built it in another pc then works the
    installation fine

    can it be that my bios settings are wrong or another problems
     
    sandersoft, Oct 8, 2006
    #3
  4. sandersoft

    BrAtKo Guest

    Hello same problem here but without specific error code. I have had same
    problem with 5728 too and with RC2 too.
     
    BrAtKo, Oct 9, 2006
    #4
  5. sandersoft

    Vairo Guest

    Vairo, Aug 26, 2007
    #5
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.