vista peer to peer 2pcs and only one can share

Discussion in 'Windows Vista Networking' started by jjglenn09, Mar 21, 2009.

  1. jjglenn09

    jjglenn09 Guest

    I dont get it, pc A can ping and see pc B, but pc B cant ping pc A....
    have tried everything.....I have them on private network, (they were o
    public), same workgroup, shared the C drive on both. I changed the name
    to "Salon 1" on pc A, and "Salon" 2" on pc B. Should they both be th
    same names????PLEASE HELP!!!!!
     
    jjglenn09, Mar 21, 2009
    #1
    1. Advertisements

  2. jjglenn09

    Malke Guest

    Each computer must have a unique name. Here are general network
    troubleshooting steps. Not everything may be applicable to your situation,
    so just take the bits that are. It may look daunting, but if you follow the
    steps at the links and suggestions below systematically and calmly, you
    will have no difficulty in setting up your sharing.

    Excellent, thorough, yet easy to understand article about File/Printer
    Sharing in Vista. Includes details about sharing printers as well as files
    and folders:

    http://technet.microsoft.com/en-us/library/bb727037.aspx

    For XP, start by running the Network Setup Wizard on all machines (see
    caveat in Item A below).

    Problems sharing files between computers on a network are generally caused
    by 1) a misconfigured firewall or overlooked firewall (including a stateful
    firewall in a VPN); or 2) inadvertently running two firewalls such as the
    built-in Windows Firewall and a third-party firewall; and/or 3) not having
    identical user accounts and passwords on all Workgroup machines; 4) trying
    to create shares where the operating system does not permit it.

    A. Configure firewalls on all machines to allow the Local Area Network (LAN)
    traffic as trusted. With Windows Firewall, this means allowing File/Printer
    Sharing on the Exceptions tab. Normally running the Network Setup Wizard on
    XP will take care of this for those machines.The only "gotcha" is that this
    will turn on the XPSP2 Windows Firewall. If you aren't running a
    third-party firewall or have an antivirus/security program with its own
    firewall component, then you're fine. With third-party firewalls, I
    usually configure the LAN allowance with an IP range. Ex. would be
    192.168.1.0-192.168.1.254. Obviously you would substitute your correct
    subnet. Refer to any third party security program's Help or user forums for
    how to properly configure its firewall. Do not run more than one firewall.
    DO NOT TURN OFF FIREWALLS; CONFIGURE THEM CORRECTLY.

    B. For ease of organization, put all computers in the same Workgroup. This
    is done from the System applet in Control Panel, Computer Name tab.

    C. Create matching user accounts and passwords on all machines. You do not
    need to be logged into the same account on all machines and the passwords
    assigned to each user account can be different; the accounts/passwords just
    need to exist and match on all machines. DO NOT NEGLECT TO CREATE
    PASSWORDS, EVEN IF ONLY SIMPLE ONES. If you wish a machine to boot directly
    to the Desktop (into one particular user's account) for convenience, you
    can do this. The instructions at this link work for both XP and Vista:

    Configure Windows to Automatically Login (MVP Ramesh) -
    http://windowsxp.mvps.org/Autologon.htm

    D. If one or more of the computers is XP Pro or Media Center, turn off
    Simple File Sharing (Folder Options>View tab).

    E. Create shares as desired. XP Home does not permit sharing of users' home
    directories or Program Files, but you can share folders inside those
    directories. A better choice is to simply use the Shared Documents folder.
    See the first link above for details about Vista sharing.

    Malke
     
    Malke, Mar 21, 2009
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.