windows 2008 wnlb

Discussion in 'Server Networking' started by sawyer, Dec 14, 2009.

  1. sawyer

    sawyer Guest

    Hello

    I have two windows 2008 sp2 servers that are running in a wnlb cluster. The
    cluster is running in unicast mode, and each node in the cluster has two
    nic's (NLB-lan & public) The nlb-lan nic has two ip's one is used for the
    node itself, and the second ip is used for the wnlb cluster ( this is ip
    clients make a connection to), there is no default gateway setup on this
    nic. The Public nic has one ip address, and this nic does have a default
    gateway setup. Because the wnlb cluster is running windows 2008, I had to
    run the netesh command against the cluster nic to set "forwarding=enabled"

    nlb-lan
    no DG
    two ip's (one ip is dedicated to the node, the other ip is setup in DNS, and
    the clients connect to this ip, this ip is configured on both nodes in the
    cluster.

    Public
    one ip
    does have DG

    Does this setup sound correct?
     
    sawyer, Dec 14, 2009
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.