Wireless association failed beacause Windows did not receive any response from the wireless router

Discussion in 'Windows Vista Networking' started by Lokerer, Oct 14, 2008.

  1. Lokerer

    Lokerer Guest

    Hello to all, i am using Windows Vista Basic and my network card is
    Broadcom 802.11b/g WLAN. So my problem is : I was having wireless
    internet from unsecured network 1 year and one day the network
    dissappeared, after 2 days the network was created again with other name
    now, so when i was trying to connect to this network it couldn't, the
    diagnose was showing the following error "..Wireless association failed
    beacause Windows did not receive any response from the wireless router
    or access point.. " , so i tried to connect the other day and
    succesfully connected, the internet connection at this unsecured network
    was good and after 3 - 4 hours the network dissapeared again...after 5
    minutes it apperead and when i try to connect to this unsecured network
    it was showing me the error "..Wireless association failed beacause
    Windows did not receive any response from the wireless router or access
    point.." again. What i must do to fix this problem???

    My network card has the latest drives.. I rolled back the driver
    believing that this was the problem but nothing.. PLEASE HELP!!!
    Thanks.

    My notebook is a compaq!!
     
    Lokerer, Oct 14, 2008
    #1
    1. Advertisements

  2. I would try to install latest firmware on the router first. Or these posts
    may help.

    Windows didn't receive any response from the wireless router
    http://www.chicagotech.net/netforums/viewtopic.php?t=5017

    Wireless association failed because Windows did not receive
    http://www.chicagotech.net/netforums/viewtopic.php?t=5016



    --
    Bob Lin, MS-MVP, MCSE & CNE
    Networking, Internet, Routing, VPN Troubleshooting on
    http://www.ChicagoTech.net
    How to Setup Windows, Network, VPN & Remote Access on
    http://www.HowToNetworking.com
     
    Robert L. \(MS-MVP\), Oct 14, 2008
    #2
    1. Advertisements

  3. Hi
    If the Wireless source is owned by you please provide more information on
    what it is and how it is configured.
    Otherwise, if you are trying to connect to a network that is Not yours, the
    owner is bumping you out and it is right to do so.
    BTW, in may states it is considered a serious offense to connect without
    permission to someone else network.
    Jack (MS, MVP-Networking)
     
    Jack \(MVP-Networking\)., Oct 14, 2008
    #3
  4. Lokerer

    Lokerer Guest

    No i am not the owner of the network, but this is a FREE PUBLIC network
    So what is the problem exactly
     
    Lokerer, Oct 14, 2008
    #4
  5. Lokerer

    Lokerer Guest

    No i am not the owner of the network, but this is a FREE PUBLIC network
    So what is the problem exactly
     
    Lokerer, Oct 15, 2008
    #5
  6. Lokerer

    Vespera Guest

    Vespera, Feb 19, 2009
    #6
  7. Lokerer

    MSDOS Guest

    To put this plain and simple , you can not do much after reinstalling
    the updated driver for your wireless card and/or using a different
    wireless PCI card or external USB adapter ( i would suggest a "Belkin N+
    USB adapter" ). It's a public network according to you and therefore if
    the Network Admins have made any changes to the network , like upgrading
    the firmwire , changing the wireless channels etc , you will not be able
    to connect to it. In that case , please spend some bucks and buy a
    router for yourself. :)


    --
    MSDOS

    '*[image:
    http://i198.photobucket.com/albums/aa17/ana_101_01/rock-1.gif]Diary of a
    Software Tech*_
    http://www.grdead.wordpress.com_' (http://www.grdead.wordpress.com)
     
    MSDOS, Feb 19, 2009
    #7
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.