Would an APC Back UPS XS 1500 work with Vista 32 bit?

Discussion in 'Windows Vista Hardware' started by Robert M. Bratcher Jr., Jun 21, 2006.

  1. It's connected by USB....
    Robert M. Bratcher Jr., Jun 21, 2006
    1. Advertisements

  2. If the UPS uses Multilink 1.5 or 3.5 then that software will not run under
    Vista. However if your UPS has a USB connector Vista has its own built in
    With the UPS connected by USB you should have an item Batteries in the
    Device Manager.
    Opened it should say HID UPS Battery. Make sure the device usage is set to
    Use this device (enable)
    Now in Hardware and Sound open the Power Options.
    Open Power saver Change plane settings.
    Click Change advanced power settings
    Open Sleep and set Hibernate after On battery to 1 Minute.
    Having saved the settings pull the plug and see if your machine Hibernates
    Don’t touch the mouse or keyboard until the power light goes out.
    If it works you can set Hibernate after On battery to a longer time if you

    Regards Mike
    Michael Dodimead, Jun 21, 2006
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.