XP running VPC4 Network problem

Discussion in 'Virtual PC' started by BrianR, Apr 19, 2004.

  1. BrianR

    BrianR Guest

    I'm running XP with VPC4. I have just installed Win95.
    The network adaptor seems to be loaded as "PCI Fast
    Ethernet DECchip 21140 Based Adaptor" but my XP
    physically has an "Intel(R) Pro/100 VE Network
    Connection". I still continue to get the "Unable to
    browse the network" error when I double click on Entire
    Network icon.

    Can anyone help me with this?

    Thanks,

    BrianR
     
    BrianR, Apr 19, 2004
    #1
    1. Advertisements

  2. BrianR

    Scott Baker Guest

    The VM hardware is emulated, so the DEC driver is correct.

    You don't provide enough information to really answer
    your question. Let's start with some basic information,
    such as how is the VM's network option set?

    Scott
     
    Scott Baker, Apr 19, 2004
    #2
    1. Advertisements

  3. BrianR

    BrianR Guest

    I only have the one adaptor and I selected the Intel(R)
    Pro/100 adaptor (same as my physical h/w).
     
    BrianR, Apr 19, 2004
    #3
  4. BrianR

    jf Guest

    I'm having the exact problem and would also like to know
    how to configure the VPM to browse a network.

    Host Win 2000 and also XP
    Guest Win 2000 and also Win 98
    using VPC 2004
     
    jf, Apr 19, 2004
    #4
  5. BrianR

    Scott Baker Guest

    Scott Baker, Apr 19, 2004
    #5
  6. BrianR

    jf Guest

    jf, Apr 20, 2004
    #6
  7. BrianR

    Scott Baker Guest

    I was responding to Brian's situation.

    Scott


     
    Scott Baker, Apr 20, 2004
    #7
  8. BrianR

    BrianR Guest

    Scott,

    Yes the VPC does have it's own IP and the subnet mask
    also match. I've setup 80-90 computers (95,98,ME,2k,XP-
    Home, XP-Pro) and I've had no problems getting them all
    set up and working fine within a minute or two. We don't
    use DHCP so I assign the IP and subnet mask, computer
    name and workgroup. It's as simple as that. Should I be
    setting something up differently because this VPC is
    running on a PC that already has an IP? I assume it
    shouldn't matter that my VPC is Win95.

    Brian
     
    BrianR, Apr 20, 2004
    #8
  9. BrianR

    Scott Baker Guest

    In the settings for the VM, what selection did you make
    for the Networking? If you are assigning your own
    addresses, I would think you want it to connect to the
    Host NIC (e.g., I have an Intel Pro/100 on the Host, so
    in the VM network settings, Adapter 1 is set to the Intel
    Pro/100).

    Scott
     
    Scott Baker, Apr 20, 2004
    #9
  10. BrianR

    Steve Jain Guest

    Just to clarify, are you referring to Virtual PC 4 from Connectix or
    Microsoft Virtual PC 2004?

    There's a very big difference

    Steve Jain, Microsoft MVP for Virtual PC for Windows
    Website: http://www.essjae.com
     
    Steve Jain, Apr 21, 2004
    #10
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.